intelbras XAS overlay Wired Magnetic Opening Sensor User Manual
- June 16, 2024
- intelbras
Table of Contents
intelbras XAS overlay Wired Magnetic Opening Sensor
Product Information
Technical Specifications
- Maximum current: 500 mA
- Operating temperature:
- Detection method: Magnetic field
- Alarm output: NC
- Protection: Anti-UV
- Environment: Indoor
- Maximum GAP:
- Security GAP:
- Cable: Flexible
Product
- Magnet
- Reed switch sensor
- Connection cable
- Screw hole for attaching
Installation
- Use the screw through holes to secure the reed switch and magnet.
- Attach the magnet to the moving part and the reed switch to the attached part of the structure.
- Check that the distance from the GAP is within the specified range to avoid unwanted triggering due to vibration.
- Always use the smallest GAP possible.
- Connect the cable to the zone input of the alarm panel.
- After installation, check if moving the magnet away from the reed switch triggers the alarm panel. Adjust the position of the sensor if necessary.
Warranty Term
This warranty is granted under the following conditions:
- The installation of the product must be executed according to the Product Manual and/or Installation Guide.
- If the product requires installation and configuration by a qualified technician, seek a suitable specialized professional.
- If the consumer requests home service, contact the nearest Authorized Service to inquire about the technical visit rate.
- This warranty does not cover loss of data, so it is advisable to regularly backup the data.
FAQ
Q: Can the XAS overlay and XAS Black overlay be installed outdoors?
A: No, the installation is recommended only indoors.
Q: What types of surfaces can the XAS overlay and XAS Black overlay be installed on?
A: The product is ideal for installation on doors, windows, etc., both made of wood and lighter metal alloys.
Q: What is the maximum current for the product?
A: The maximum current is 500 mA.
Q: What is the detection method used by the product?
A: The detection method is magnetic field.
XAS overlay and XAS Black overlay Wired magnetic opening sensor
Congratulations, you have just purchased a product with Intelbras quality and safety. The built-in XAS and XAS built-in magnetic sensors are compact and discreet, and installation is recom-mended only indoors. This product is ideal for installation on doors, windows, etc., both of wood and lighter metal alloys. Read the product introductory information carefully for the correct use of the sensor.
Care and security
- Install the sensor in a stable location, that is, that there will be no vibrations;
- Respect the distance from the GAP – always use the smallest GAP possible;
- To clean the sensor, use a damp cloth, never use chemicals;
- If you are going to use the sensor as a switch to trigger a load, respect the specified maximum voltage and current.
- LGPD – General Law for the Protection of Personal Data: Intelbras does not access, transfer, capture, or perform any other type of treatment of personal data from this product.
1 GAP is the distance between the reed switch and the magnet.
Technical specifications
| Maximum voltage at the alarm output | ± 100 V |
|---|---|
| Maximum current | 500 mA |
| Operating temperature | -10 ºC to 50 ºC |
| Detection method | Magnetic field |
| Alarm output | NC |
| Protection | Anti-UV |
| Environment | Indoor |
| Maximum GAP | 20 mm ± 10% |
| Security GAP | ≤15 mm ± 10% |
| Cable | Flexible |
| Dimensions (B × W × D) | 34 × 14 × 7.7 mm |
Dimensions
(All measurements have a tolerance of ± 2 mm).
Product
- Magnet
- Reed switch sensor;
- Connection cable
- Screw hole for attaching.
Installation
-
Use the screw through holes to secure the reed switch and magnet;
-
Attach the magnet to the moving part and the reed switch to the attached part of the structure.
-
Check that the distance from the GAP1 is within the specified, to avoid unwanted triggering in case of any vibration in the structure where the sensor is installed.
Always use the smallest GAP possible -
Connect the cable to the zone input of the alarm panel, as shown below:
-
After installation, check if, by moving the magnet away from the reed switch, the alarm panel goes off, indicating that there was a tampering. If necessary, adjust the position of the sensor.
Warranty term
It is established that this warranty is granted upon the following conditions:
- Client’s name:
- Client’s signature:
- Invoice number:
- Date of purchase:
- Model: Serial number:
- Retailer:
- Serial number:
- All the parts, pieces and components of the product are guaranteed against possible manufacturing defects, which may arise, for the term of 1 (one) year – this being 90 (ninety) days of legal warranty and 9 (nine) months’ contractual war-ranty –, counting from the date of purchase of the product by the Consumer, as appears in the product purchase bill of sale, which is an integral part of this Term throughout the domestic territory. This contractual warranty includes the free exchange of parts, pieces and components which have a manufacturing defect, including the expenses with labor used in this repair. If there is no manufacturing defect, but defect(s) arising from misuse, the Consumer shall bear these expenses.
- The installation of the product shall be executed in accordance with the Product Manual and/or Installation Guide. If your product requires the installation and configuration by a qualified technician, seek a suitable specialized professional, the costs of these services not being included in the product amount.
- Having perceived the defect, the Consumer shall immediately contact the nearest Authorized Service which appears in the report offered by the manufacturer – they are the only ones authorized to examine and remedy the defect during the warranty term foreseen herein. If this is not respected, this warranty shall lose its validity, as it shall be characterized as product infringement.
- If the Consumer requests home service, it shall contact the nearest Authorized Service to inquire about the technical visit rate. If it is necessary to remove the product, the ensuing expenses, such as those of transportation and insurance of the taking and return of the product, shall be the Consumer’s responsibility.
- The warranty shall lose its validity totally in the occurrence of any of the following cases: a) if the defect is not one of manu-facture, but is caused by the Consumer or by third parties foreign to the manufacturer; b) if the damage to the product arises from accidents, disasters, agents of nature (lightning, floods, landslides, etc.), humidity, voltage in the electrical network (excess voltage caused by accidents or excessive fluctuations in the network), installation/use in disagreement with the user’s manual or arising from natural wear of the parts, pieces and components; c) if the product has undergone effects of a chemical, electromagnetic, electrical or animal (insects, etc.) nature; d) if the serial number of the product has been falsified or erased; e) if the appliance has been infringed.
- This warranty does not cover loss of data; therefore, it is advisable that if it is the case of the product, the Consumer makes a backup regularly of the data which appears in the product.
- Intelbras is not responsible for the installation of this product, or for possible attempts at fraud and/or sabotage in its products. Maintain the updates of the software and applications used up-to-date, if it is the case, as well as the network protection required for defense against hackers. The equipment is guaranteed against defects in its usual conditions of use, it being important to bear in mind that, as it is electronic equipment, it Is not free of fraud and scams which may interfere with its correct functioning.
- After its useful life, the product must be delivered to an authorized Intelbras service center or directly disposed of in an environmentally appropriate manner to avoid environmental and health impacts. If you prefer, the battery, as well as other unused Intelbras brand electronics, can be disposed of at any Green Eletron collection point (waste management facility to which we are associated). If you have any questions about the reverse logistics process, please contact us at (48) 2106-0006 or 0800 704 2767 (Monday to Friday 8am to 8pm and Saturdays 8am to 6pm) or via -mail support@intelbras.com.br.
These being the conditions of this complementary Warranty Term, Intelbras S/A reserves the right to alter the general, technical and esthetic features of its products without prior notice. All the images of this manual are illustrative.
- Customer Support: (48) 2106 0006
- Forum: forum.intelbras.com.br
- Support via chat: chat.intelbras.com.br
- Support via e-mail: suporte@intelbras.com.br
- Customer Service: 0800 7042767
Where to buy? Who installs it? 0800 7245115 Imported to Brazil by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira Rodovia SC 281, km 4,5 – Sertão do Maruim – São José/SC – 88122-001 CNPJ 82.901.000/0014-41 – www.intelbras.com.br
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>