eta Vitalic Slow Juicer Instructions

Slow juicer
INSTRUCTIONS FOR USE

Vitalic Slow Juicer

Vitali c

Product images are for illustrative purposes only.

Slow Juicer
eta 4032

INSTRUCTIONS FOR USE

Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including, the receipt and, if possible, the box with the internal packing.

SAFETY PRECAUTIONS

– Consider the instructions in the user‘s manual as a part of the appliance and provide it to other users of the appliance.
– Check that the voltage on the type label corresponds to the voltage in your electric power socket.
– Do not insert the power plug into the electric power socket and do not pull it out of the electric power socket with wet hands or by pulling on the power cord!
– This appliance must not be used by children. Keep the device and its supply cord out of reach of children. The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers. Children must not play with the appliance.
– Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance or after finishing work, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
– If the power cord of this appliance is damaged, the cord must be replaced by the manufacturer, their service technician or by a similarly qualified person, this will prevent the creation of a dangerous situation.
– Never use the appliance if the power cord or power plug are damaged, if it is not functioning correctly or if it has fallen on the floor and been damaged or if it has fallen into water. In such cases take the appliance to a professional service centre to verify its safety and correct function.
– Always disconnect the appliance from the power socket if you will be leaving it without supervision.
– Do not leave the appliance in operation without supervision and supervise it for the entire time that food is being prepared!
– CAUTION: Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
– The product is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
– When the appliance is in operation, prevent pets, plants or insects to get in contact with it
– Never submerge the drive unit under water and do not wash under running water!
– Use the appliance only in the working position in places, where there is no risk of it being knocked over and at a sufficient distance from sources of heat (e.g. fire stoves, electric/ gas stoves, cookers, etc.), and wet surfaces (kitchen sinks, wash basins etc.).
– This appliance is not intended for outdoor use.
– The appliance must not be used in damp or wet environment and in any environment with the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and other flammable or volatile materials are stored).
– Make sure hair and loose pieces of clothing do not get into the attachments or into the rotating drive to avoid risk of them tangling up in the rotating drive itself.
– If the juicer gets overheated, it will turn off automatically to protect the machine. In this case, please turn the switch to the “0” (off)” position and disconnect the appliance from power supply. Wait 20 minutes to let the juicer cool down and then turn it on again.
– Do not use the juicer if the sieve is damaged, if it shows visible cracks or tears or if the sieve is torn.
– Possible short-time mild smoke when the appliance is operated for the first time is not a defect and the appliance is not subject to a complaint for this reason.
– Do not use the appliance, it the rotary sieve is damaged, if it shows visible cracks or tears or if the sieve is torn.
– It is not allowed to modify the surface of the appliance in any way (e.g. using a selfadhesive wallpaper, foils, etc.)!
– Do not touch the rocker switchs with wet hands.
– Never remove the upper cover until the rotating sieve stops completely.
– Use the appliance only with accessories designed for this model. The use of other accessories may present a danger for the user.
– Correctly placing the lid on the appliance will release the safety lock and the appliance may be turned on.
– Do not exceed the maximum continuous operating time 30 minutes of the appliance.
– Before preparation, remove possible packages from food (e.g. paper, a PE bag, etc.).
– Do not insert the accessories into any body orifice.
– Never put fingers into the feeding hole or use a fork, knife, spatula, spoon etc. to do so. Use the provided pusher for this purpose.
– Check if the appliance is turned off before each plugging in to the mains.
– Never use the appliance if the pulp container is not fitted to it properly.
– Do not process frozen food.
– If the pulp begins to pile up excessively, e.g. on the sieve, turn off the appliance and clean the part.
– Do not fill the container with juice to maximum. When in operation, the juice could overflow and get into the appliance.
– Before removing the lid, allow rotating parts to stop completely.
– Regularly check the condition of the power supply cord of the appliance.
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with the valid standards.
– Do not reel the power cord around the appliance to increase product lifecycle.
– The power supply cord must not be damaged by sharp or hot subjects, by naked flame and it must not be immersed into water or bent over sharp edges. Never put it on hot surfaces and do not let it hang over the edge of a table or a worktop. Hitting, stumbling
over or pulling the power cord, e.g. by children, can result in tilting over or drawing the appliance down and cause serious injury!
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with the valid standards.
– Use this appliance only for its intended purpose described in these instructions for use! Never use the appliance for any other purpose.
– WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.
– All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
– The producer does not undertake any responsibility for damage or injuries caused by improper use of the appliance and the accessories (e.g. food deterioration, injuries, fire) and its does not cover the appliance in the case of failure to comply with the safety warnings above.

FEATURES OF THE DEVICE (pic. 1)

A – propulsion unit
A1 – button I / O / R (turn on / off / reverse
A2 – supply cord
B – juicing container
B1 – feeding neck
B2 – cover
B3 – stamper
B4 – juicer attachment body closing
B5 – press worm
B6 – sieve
B7 – pulp slit
B8 – juice opening
B9 – plug
C – juice container
D – pulp container
E – cleaning brush

Button A1
I = the appliance is on.
O = the appliance is off.
R = (REVERSE), only when something is stuck and you need to unclog. Pressing and holding this button will put the appliance into operation (the spiral feeder will start rotating in opposite direction); releasing the button will switch off the appliance.
Safety lock
– It prevents starting the appliance if lid B4 is not properly mounted on drive unit A.
– It switches off the appliance if the lid becomes unsecured.
III. PREPARATION AND USE
Remove all packaging material and remove the appliance with accessories. Remove all adhesive foils, stickers or paper from the appliance. Wash all parts which will come in touch with food in hot water with soap, rinse them thoroughly with clean water and wipe dry or let dry before first use.
Assembly (pic. 2, 3)
Check and, if necessary, insert the rubber plug B9 into the hole (pic. 2). Replace the sealing sleeve in the juicing container B if previously removed. Mount the juicing container B on propulsion unit A. Mount the press worm B5 on juicing container B so that it slides down. Then put the attachment body B4 (symbols ▲ on the attachment body B4 and juicing container B must be in one line).
The attachment body B4 band turn in direction of the symbol. Pay extra attention to this operation. Place the pulp container D under the pulp opening B7 and the juice container C under the juice opening B8. Proceed reversely when diassembling. When  removing the juicing container lid, do not forget to turn in the direction of the symbol .
Food preparation
– Do not mince frozen fruit and vegetables. Allow to defrost before processing.
– Unsuitable raw materials for processing: celery, overripe to mealy fruits such as apples, pears, etc.
– The appliance is intended for processing almost all kinds of fruit and vegetables (see I. SAFETY NOTICE).
– Always use fresh, ripe fruits and vegetables which will give you more juice. Over-ripened fruit and vegetables will be more difficult to juice and less healthy.
– Remove the stems and haulms.
– When pressing juice from currant, it is better to leave the whole cluster of currents.
– Wash the fruit or vegetables thoroughly.
– Cut bigger foods into smaller pieces.
– Remove pits (e.g. with plums, apricots, cherries, etc.)
– Remove thick skin (e.g. with melons, pineapples, cucumbers, potatoes, beet, celery, etc.).
– Peel citrus fruits (e.g. orange, lime) and remove white pulp and seeds; otherwise the juice could turn bitter.
– Foods with thin skin do not need to be peeled (e.g. apples, pears, carrots, parsley).
Use of the appliance
Place the assembled juicer on a firm, flat and dry surface (see par.I. SAFETY PRECAUTIONS). Openings in the appliance ensure the flow of air during ventilation and must not be covered or blocked in any way. The feet of the appliance must also not be removed. Make sure that the power supply cord is not damaged and that it does not lead through any sharp or hot surfaces. The socket must be easily accessible so that it would be possible to unplug the appliance immediately in case of danger. Plug the fork of the supply cord A2 into the el. outlet. Turn on the appliance by pressing the button A1 (I=on).
Put the washed “large” pieces of fruits and vegetables into the feeding chute, turn the knob to pour the fruits and vegetables into the feeding chute B1, and put the small pieces of fruit and vegetables from the “small” feeding chute. After putting the material, push the material with a stamper B3. Do not push hard on the stamper, it could affect quality of the juice or even cause the appliance to stop. Having finished using the appliance by pressing the button A1 (O), turn it off, and unplug the appliance from the outlet by pulling out the fork of the supply cord from the socket. After work, plug the juice spout B8 using the plug before removing the pitcher from under the juice spout. This will prevent the juice from dripping on the kitchen worktop.
Notes
– Do not confuse the function of the juicer with centrifugal juice extractor.
– We recommend suspending work once in a while and removing the pulp which has collected on the sieve (see par. I. SAFETY PRECAUTIONS).
– The pulp will take a while to start coming out of the front of the pulp – this is normal.
– The preparation times depend on amount, kind and quality of the food used and range in tens of seconds.
Notes
– Maximum time of continuous operation is 30 minutes, then leave the appliance rest and cool down for approx. 10 min. When squeezing juice from hard food products, do not operate the appliance for longer than 90 seconds and then allow it to cool down completely.
– The maximum weight of fruits and vegetables placed in the Juice Maker should not exceed 1000 g for each minute of operation. If the squeezing screw gets stuck or clogged with fruits or vegetables use the I=R (REVERSE) function for 2-3 seconds.
If the problem persists, take the appliance apart, clean and re-assemble.
– Do not plug the pulp ejection outlet or the juice spout during appliance operation.
– If you need to empty the pulp container D during the process, turn off the appliance first. Place the container back properly after emptying.
– Clogging will occur if the feed tube is overfilled or food packed too tightly
– If the appliance becomes stuck, turn it off immediately and clean it.
Tips for operation
– To keep as many vitamins as possible, consume the juice soon.
– In case you need to keep the juice for several hours, put it in a refrigerator.
The juice will stay fresh longer if you add a few drops of lemon juice.
– Water down the juice for children with same amount of water.
– In case you need to keep the juice for several hours, put it in a refrigerator.
The juice will stay fresh longer if you add a few drops of lemon juice.
– It is unnecessary to remove the tender peel or thin peel off the fruits, only the thick peel needs to be removed in advance, e.g.: orange and tangerine, pineapple and raw beet.
– In juicing apples, the juice thickness depends on the variety of the apple. The more juice an apple contains, the thinner the juice will be. Please choose the apple variety in compliance with your favor. The apple juice will turn yellow very soon, and putting some
drops of lemon juice in will prolong the turning-yellow time.
– The juicer is not fit for juicing fruits and vegetables that are especially hard, of multiple fivers and contain rich starch, such as sugar cane, avocado, bananas, figs, mango, papaya, dragon fruit, strawberry, etc. They will clog up the stainless steel sieve.
– Squeezing juice from plums, blueberries, raspberries, soft pears and apples and other fruits may be troublesome. The pulp of these fruits forms spongy mass that clogs the strainer holes. You can make juice from these fruits by adding them in small quantities to other fruits or vegetables but you may need clean the strainer more often.

TABLE FOR THE USAGE

Please consider the following cooking tips as examples and as inspiration. Their purpose is not to be a complete guide, but to demonstrate the possibilities of various food preparation methods. Chose the amount of ingredients to be processed so that the maximum content of the containers marked by a line is not exceeded. A larger amount of processed ingredients must be divided into several batches and the contents of the container should be regularly inspected.

MAINTENANCE

Please wash the juicing parts every time immediately after each used, otherwise the pulp might stick tightly in Juicing Bowl & Squeezing Auger which will then affect the disassembly, cleaning and juicing performance.
Unplug the appliance from the electric outlet before each maintenance and cleaning by pulling out the fork of the supply cord from the socket! Do not use any abrasive cleaning agents (e.g. sharp objects, diluents or other dissolvents)!
Thoroughly wash the appliance after each use, preventing any juice or residual fruit or vegetable pulp from drying (fig. 5). Clean the propulsion unit A with a soft, damp cloth.
Wash the other removable accessories immediately after use in hot water with soap, rinse them with clean water and let dry (use the dish washer, please do not use water above 60 °C). Remove residue from crevices or corners using and sieve drive B6 may be easily cleaned with the brush E. Take care not to damage the sieve mesh during cleaning.
Some fruits may discolour the accessories. Take care that the binding surfaces and the sealing elements are functional. This has, however, no effect on the functions of the appliance and this discoloration will usually disappear with time. This change in no way changes the properties of the surface and is not a reason for complaint about the appliance! Never dry the plastic die-cast over a heat source (e.g. stove, el./gas cooker).
Take care that the binding surfaces and the sealing elements are functional.
More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to expiration of the right to guarantee repair!

ANSWERS TO PROBLEMS

being incorrectly assembled, the juicer refuses to work. First cut off the power supply to the juicer, then check the components to see whether or not they are correctly assembled.
In the first operations of the equipment, the electric motor unit sends unpleasant odor.| This is not an abnormal phenomenon. If after many operations the product still sends such an odor, then check its processing volume and processing time.
The juice is too dense or too watery| Make sure the rubber plug is properly installed (fig. 2). Make sure that the juice is made with fresh ingredients. Make sure the screen is not clogged.
The juicer has a heavy noise, sends unpleasant odor,
become so hot that it cannot be touched, becomes and so on.| Turn off the power supply to the juicer, and pull off the power supply plug. The components to see whether or not they are correctly assembled. Turn to the local after- sale service center or phone the customer-servicing center hot-line for help.
Juice flows out of the juice outlet| Check that the B9 plug is correctly positioned. Alternatively, check that the cap on the B8 outlet is not closed.

STORAGE

To save space stack washed and dried containers and. Store the appliance on a dry place, out of reach of children and persons sui juris.

ENVIRONMENT

If the dimensions allow, there are marks of materials used for production of packing, components and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste.For proper disposal, hand them over at the special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authority or at a collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation, after disconnecting it from power supply we recommend its cutoff and in this way it will not be possible to use the appliance again.

TECHNICAL DATA

Voltage (V) / Input power (W) …………….Shown on the type label of the appliance
Weight (kg) approx. ………………………………3
Volume of the juice jug / of dry pulp bin (l) …………………0.8/0.6
Protection class of the appliance …………………………………….II.
Input in standby mode is < 1,00 W.
Noise level: Acoustic noise level of 70 dB(A) re 1pW
The manufacturer reserves the right to change the technical specifications and accessories for the respective models.
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE INSTRUCTIONS MANUAL:
HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

The symbol **** indicates a WARNING.
Please read the instructions manual
unlocked
locked

e.č. 17/2023
© DATE 31/07/2023

Documents / Resources

| eta Vitalic Slow Juicer [pdf] Instructions
Vitalic Slow Juicer, Vitalic, Slow Juicer, Juicer
---|---

References

• AEG Hausgeräte | Setzen Sie auf Qualität | AEG
• ETA - tady je doma
• ETA - tu je doma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>