Chtoocy HT005-01 Pet Heater Instruction Manual
- June 16, 2024
- CHTOOCY
Table of Contents
Chtoocy HT005-01 Pet Heater
Pet Heater Instruction Manual
Product Model
- HT005-01
- HT005-02
Warm Ups: HT005-01 with temperature digital display, HTOOS–02 without
temperature digital display
MADE IN CHINA
Product Components
Installation Instructions
- Fix the wall bracket to the wall using the installation screws, as shown in the diagram on the right. If the wall is a solid surface, drill holes first and then secure the wall bracket using the installation screws and expansion plugs.
- Install the hair guard on the air inlet of the main unit’s rear cover. This accessory attaches magnetically to the body bracket on the device, as shown in the diagram below. Ensure the black edge strip is snug against the body bracket, and the two notches align with the empty screw holes.
Safety Warnings and Precautions
- Safety Warnings and Precautions It is strictly forbidden to use the machine around bathtubs, jets or swimming pools.
- It is strictly prohibited to use the machine by placing it directly under an electrical outlet.
- When the product is in use, do not place the body near combustible materials such as walls and curtains.
- If the product malfunctions, please send it to the repair station or notify the after-sales service centre, do not disassemble or replace the parts without permission. Arbitrary disassembly, modification will affect the safety of the product.
- It is strictly prohibited to insert foreign objects such as wooden or metal sticks into the air inlet and outlet. It will lead to the possibility of leakage, short circuit and product damage.
- Do not touch the power cord plug with wet hands.
- Do not spray insecticides and flammable sprays around the product, which may damage the product.
- When unplugging the power cord, do not pull the cord with a strong force, as this can lead to damage to the power cord. leakage and other dangers.
- To use this machine, you must use a qualified power socket that has been checked and meets the requirements. The load capacity of the socket must not be less than 10A/120 V. Make sure that the voltage of the power supply is the same as that specified on the nameplate of the machine (AC120 V).
- Do not use if the power cord is exposed or damaged. It can lead to leakage of electricity and short circuit and cause the danger of fire. If the power cord is damaged, it must be replaced by a professional from the manufacturer, its service department or similar, in order to avoid danger.
- When you go out or do not use the unit for a long period of time, you must switch off the unit and unplug the power cord from the socket.
- To avoid overheating, covering the heater is prohibited. It is strictly prohibited to place objects on the body.
Specifications
Instructions for Use
The following HT005-01 applies.
- Insert the power cord plug into the power outlet, press the switch on the cord to “0”, “I”, “I” gears, respectively, “off”, “low”, “high”. “Low” and “High” respectively.
- Press the on/off button on the line to “I”, low gear start. The digital tube displays the real-time indoor temperature.
- Press the on/off button to “Il”, and start in high grade. The digital tube displays the real-time indoor temperature.
The following HT005-02 apply.
- Insert the power cord plug into the power outlet, press the switch on the cord to “0”, “I”, “II” gears, respectively, “off”, “low”, “high”. “Low” and “High” respectively.
- Press the on-line switch to “I” to start in low gear.
- Press the on-line switch key to “Il” to start in high gear
Key Features
- Real-time room temperature display. The heating element stops working when the room temperature exceeds 100°F (37.8°C) and restarts when the temperature falls below 95°F (35°C) for HT005-01 (Not applicable to HT005-02).
- Steel spring protection for the power cord to prevent pets from biting or chewing on the cord.
- Detachable hair guard for easy cleaning of pet hair and dust.
- Remote switch for power control, keeping it away from the main unit to prevent accidental pet activation.
- Wall-mounted installation for stability and to prevent pets from knocking over the unit. The handle screw ensures secure yet easy detachment.
- Equipped with temperature-limiting and over-temperature protection components for multiple layers of safety.
- Utilizes PTC heating element, flameless and high thermal efficiency.
- Direct current motor for airflow, producing noise levels below 45 decibels, creating a quieter environment for your pet’s space.
Cleaning and Maintenance
Before cleaning, make sure to turn off the power and unplug the power cord to avoid the risk of electric shock.
- For cleaning the surface of the device, use a damp cloth (or add a small amount of dishwashing liquid) to wipe it. Do not use gasoline, benzene, corrosive detergents, solvents, or any similar cleaning agents, and do not rinse with water.
- If excessive pet hair or dust accumulates on the hair guard of the product, it may affect the airflow. Therefore, it is recommended to clean it at least once a month. Follow the steps below for cleaning:
- Turn off the power and unplug the power cord (ensure the power cord is disconnected before cleaning the unit to prevent electric shock or mechanical injury).
- Remove the hair guard and clean it using a mild detergent and a soft brush. Do not use chemical agents. After cleaning, wipe the hair guard dry and reinstall it in its original position. Refer to the “Installation Instructions” for proper placement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>