Taylor T-7030 Belt Sander Instructions
- June 16, 2024
- TAYLOR
Table of Contents
Taylor T-7030 Belt Sander Instructions
PARTS DESCRIPTION
| REF # | PART # | DESCRIPTION | QTY |
|---|---|---|---|
| 1 | 703001 | HOUSING | 1 |
| 2 | 703002 | GUARD | 1 |
| 3 | 703003 | AIR INLET | 1 |
| 4 | 703004 | LEVER | 1 |
| 5 | 703005 | VALVE STEM | 1 |
| 6 | 703006 | REGULATOR | 1 |
| 7 | 703007 | O-RING | 1 |
| 8 | 703008 | SPRING | 1 |
| 9 | 703009 | O-RING | 1 |
| 10 | 703010 | SPACER | 1 |
| 11 | 703011 | RETAINING RING | 1 |
| 12 | 703012 | DISTANCE COLLAR | 1 |
| 13 | 703013 | BEARING | 1 |
| 14 | 703014 | REAR END PLATE | 1 |
| 15 | 703015 | ROTOR | 1 |
| 16 | 703016 | BLADES (SET OF 5) | 1set |
| 17 | 703017 | KEY | 1 |
| 18 | 703018 | CYLINDER | 1 |
| 19 | 703019 | FRONT END PLATE | 1 |
| 20 | 703020 | WASHER | 1 |
| 21 | 703021 | CAP | 1 |
| 22 | 703022 | DRIVE PULLEY | 1 |
| 23 | 703023 | NUT | 1 |
| 24 | 703024 | FLAT SHOE | 1 |
| 25 | 703025 | BOLT | 1 |
| 26 | 703026 | DUST COVER | 1 |
| 27 | 703027 | NIPPLE | 1 |
| 28 | 703028 | SPRING | 1 |
| 29 | 703029 | SILENCER | 1 |
| 30 | 703030 | SCREW | 1 |
| 31 | 703031 | LEVER SUPPORT | 1 |
| 32 | 703032 | SCREW | 2 |
| 33 | 703033 | SPRING WASHER | 2 |
| 34 | 703034 | NUT | 1 |
| 35 | 703035 | SHOE HOLDER | 1 |
| 36 | 703036 | O-RING | 2 |
| 37 | 703037 | WASHER | 1 |
| 38 | 703038 | SPRING WASHER | 1 |
| 39 | 703039 | SCREW | 1 |
| 40 | 703040 | TENSION SPRING | 1 |
| 41 | 703041 | TENSION BAR | 1 |
| 42 | 703042 | NUT | 1 |
| 43 | 703043 | IDLER PULLEY | 1 |
| 44 | 703044 | SHAFT | 1 |
| 45 | 703045 | BEARING | 2 |
| 46 | 703046 | SPACER | 1 |
| 47 | 703047 | RETAINING RING | 1 |
| 48 | 703048 | BOLT | 1 |
| 49 | 703049 | SPRING WASHER | 1 |
| 50 | 703050 | SPRING PIN | 1 |
| 51 | 703051 | SPACER | 1 |
| 52 | 703052 | SPRING RETAINER A | 1 |
| 53 | 703053 | SPRING RETAINER B | 1 |
| 54 | 703054 | BOLT | 1 |
| 55 | 703055 | SUB HANDLE HOLDER | 1 |
| 56 | 703056 | HANDLE | 1 |
| 57 | 703057 | WAVED LOCK WASHER | 1 |
| 58 | 703058 | THRUST WASHER | 1 |
| 59 | 703059 | RETAINING RING | 1 |
| 60 | 703060A | WASHER | 1 |
| 61 | 703061 | ARM | 1 |
| 62 | 703062 | SPRING PIN | 1 |
| 63 | 703063 | RETAINING RING | 1 |
| 64 | T-703080 | 80 GRIT BELT | 1 |
| T-7030120 | 120 GRIT BELT | 1 | |
| 66 | 703066 | 5MM WRENCH (NOT SHOWN) | 1 |
OILING INSTRUCTIONS:
OIL AFTER EACH USE WITH A FEW DROPS OF AIRTOOL OIL THROUGH THE AIR INLET. RUN
FOR 1 SECOND TO COAT ALL INTERNAL PARTS
505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, FL
FOR WARRANTY INFORMATION & WARRANTY REGISTRATION VISIT
www.taylorpneumatic.com
8/23 / ALL RIGHTS RESERVED / COPYRIGHT 2023
Ph. (561)732-1111
Fax. (561)731-4412
Toll Free 800-805-8665
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>