CTEK Pro25 CIC Battery Charger User Manual
- June 16, 2024
- CTEK
Table of Contents
CTEK Pro25 CIC Battery Charger
Product Information
Specifications
- Input Voltage: 12V
- Output Current: 25A
- Warranty: 2 years
The user manual for the CTEK Battery Charger PRO25 CIC. This charger is designed for lead-acid batteries 40-500Ah and lithium batteries 30-450Ah and is fully automatic.
Features:
- Multilingual Manual
- 12V, 25A
- 2 Year Warranty
| Feature | Specification |
|---|---|
| Model Number | 1093 |
| Input | 220-240 V AC, 50-60 Hz, max 2.9 A |
| Output | 25 A, 12 V |
| Charging Current | 40 A into dead battery |
| Safety | Reverse polarity protection, spark-free operation, short-circuit proof |
| Start Voltage | 2.0 V for lead-acid batteries, 8.0 V for lithium-ion batteries |
| Back Current | Less than 2.3 Ah/month |
| Ripple** | Less than 4% |
| Operating Temperature | -20 °C till +50 °C (-4 °F till +122 °F) |
| Battery Types | 12V: WET, MF, Ca/Ca, AGM, EFB, GEL, LiFePO4 |
| Battery Capacity | 40-500 Ah, batteries of type lead-acid |
30-450 Ah, batteries of type lithium-ion
Enclosure Class| IP44
Warranty| 2 years
- Backström is the current that drains the battery when the charger is not connected to the power supply. CTEK chargers have very low back current.
** Charging ripple is the quality of the charging voltage and is very important. High charging ripple heats the battery and can damage the battery’s positive electrode. CTEK chargers produce very clean voltage and current with low ripple.
Product Usage Instructions
Connecting the Charger
Refer to the vehicle’s manual and follow the instructions to connect the
charger to the battery.
Charging Modes
The charger offers different charging modes for different battery types.
The available modes are:
- Normal Program (Lead Acid)
- Lithium Program
- Supply Program
- Reconditioning Program
Normal Program (Lead Acid)
This program is suitable for lead acid batteries. It provides a normal
charging process.
Lithium Program
This program is designed for lithium-ion batteries. It provides a specific
charging process optimized for lithium-ion technology.
Supply Program
The supply program allows the charger to act as a power supply for the
connected battery without charging it.
Reconditioning Program
The reconditioning program is used to revive and restore the performance of
old or deeply discharged batteries.
Battery Size and Charging Time
The charging time varies based on the capacity of the battery. The
following table shows the estimated time to reach 80% charge for different
battery sizes:
| Battery Size (Ah) | Time to 80% Charged |
|---|---|
| 40 Ah | 1.5 hours |
| 100 Ah | 3 hours |
| 200 Ah | 6 hours |
| 500 Ah | 16 hours |
Warranty Conditions
CTEK provides a warranty to the purchaser of the product. The warranty is non- transferable and is valid for defects in material and workmanship. The customer must return the product together with the purchase receipt. The warranty does not cover if the product has been opened, mishandled, or repaired by anyone other than CTEK or its authorized representatives. If a scratch on the underside of the charger can be sealed. If resealing or damage ceases, the warranty does not apply. CTEK provides no warranty beyond this limited warranty and is not responsible for costs other than those mentioned above, including consequential damages. In addition, CTEK does not provide any warranty beyond this warranty.
Support
For support, FAQ, the latest version of the instruction manual, and further
information about CTEK products, visit: www.ctek.com.
Frequently Asked Questions (FAQ)
What is the warranty period for this charger?
The charger comes with a 2-year warranty.
Can I use this charger for lithium-ion batteries?
Yes, the charger has a specific Lithium Program designed for charging lithium- ion batteries.
How long does it take to charge a 100 Ah battery using the Normal Program?
Make sure the clamps are properly attached to the battery terminals and the charging contacts are fully plugged in.
What should I do if the warning lamp lights up?
Check if the red clamp is connected to the battery's positive pole, if the charger is connected to a 12 V battery, and if the clamps are short-circuited. Refer to the manual for detailed troubleshooting steps.
How long does it take to charge a battery?
The estimated time to charge a battery from empty to 80% is 1.5 hours for a 40 Ah battery, 3 hours for a 100 Ah battery, 6 hours for a 200 Ah battery, and 16 hours for a 500 Ah battery.
What types of batteries can be charged with this charger?
The charger is suitable for 12V lead-acid batteries (WET, MF, Ca/Ca, AGM, EFB, GEL, LiFePO4) and lithium-ion batteries (40-500 Ah for lead-acid and 30-450 Ah for lithium-ion).
Q: Where can I find additional support and information?A: Additional support and information can be found on the CTEK website at www.ctek.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>