MOUNTUP MU0006 Triple Monitor Counterbalance Desk Mount Instruction Manual

MOUNTUP MU0006 Triple Monitor Counterbalance Desk Mount

Product Information

Specifications:

• Compatibility: 75x75mm, 100x100mm VESA patterns
• Weight Capacity: (1~8kg)x3, (2.2~17.6lbs)x3
• Model Number: 80002-MA02-36P-US3.0

Product Usage Instructions

Step 1: Clamp Installation or Grommet Base Installation

Option A: Clamp Installation

1. Loosen Bolts (B5) by using the 6mm Allen Key (N).
2. Lift clip plate (B2), bottom plate (B3), and bolt Y (B4) slightly to release them from bracket (B1).
3. Mount bracket (B1) to the pole (F) using bolts (I). Tighten using the 4mm Allen Key (L).
4. Attach clip plate (B2), bottom plate (B3), and bolt Y (B4) to bracket (B1) using bolts (B5) and the 6mm Allen Key (N). Mount according to the thickness of the desktop.
5. Attach decorative cover (C) to the pole (F) and secure the stand to the desktop by tightening the clamp (B). Tighten bolt Y (B4) or use the 6mm Allen Key (N).

Option B: Grommet Base Installation

1. Use the 6mm Allen Key (N) to detach the bolt (B5), clip plate (B2), bottom plate (B3), and bolt Y (B4) from the clamp (B).
2. Install the grommet base plate (K) to the pole (F) using bolt (I).
3. Install pole (F) with bolt Y (B4) and support plate (J). Tighten bolt Y (B4) or use the 6mm Allen Key (N).

Step 2: Arm Installation

Install the middle head (E), wire clip (G), and swivel arm (A) to the pole. Fasten the bolt with the supplied 6mm Allen Key (N). Just tighten the bolt, do not over tighten it in case the cast aluminum part could be damaged.

Step 3: Attach Monitor

Option A: Flat Back Monitor

1. Attach the VESA plate (D) to the back of the monitor.
2. Secure it by using a 6mm Allen Key (N) to tighten screws (M-A). Do not tighten the screws excessively or your monitor might be damaged. If the M-A screw is a little long, please use a H5mm spacer to fix it.

Option B: Curved Back Monitor

FAQ:

Q: What is the weight capacity of this desk mount?

A: The weight capacity of this desk mount is (1~8kg)x3, which is equivalent to (2.2~17.6lbs)x3.

Q: What VESA patterns are compatible with this desk mount?

A: This desk mount is compatible with 75x75mm and 100x100mm VESA patterns.

Q: Can I use this desk mount for monitors that exceed its weight capacity?

A: No, it is important not to exceed the weight capacity of this desk mount to avoid damage or injury.

Q: Are all the included hardware necessary for the assembly?

A: Not all hardware included will be used during the assembly process.

Q: Is adult supervision required for using this product?

A: Yes, adult supervision is required as the kit contains small items that could be choking hazards if swallowed.

Q: Where can I contact customer service if I have any questions or need assistance?

A: You can contact Customer Service via Amazon before returning the product.

WARNING!

If you have any confusions or are not quite sure about the installation, please do not hesitate to ask for our help. Before assembly, please check and make sure all necessary accessories are included and undamaged. Improper installation, such as use the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury caused by improper mounting or inappropriate use.
The kit contains small items that could be choking hazards if swallowed. Please keep them OUT OF REACH OF CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

ASSEMBLY STEPS

STEP 1 : Clamp Installation OR Grommet Base Installation

• OPTION A: Clamp Installation
  Loosen Bolts (B5) by using 6mm Allen Key (N), then lift clip plate (B2), bottom plate (B3), and bolt Y (B4) a little to release them from bracket (B1).

  • Mount bracket (B1) to pole(F) using bolts (I). Tighten using 4mm allen key(L). Attach clip plate(B2), bottom plate(B3), bolt Y(B4), to bracket (B1) using bolts (B5) and 6mm allen key (N). Mount according to the thickness of desktop.
  • Decorative cover (C) to pole(F) and secure stand to desktop by tightening clamp (B). Tighten bolt Y (B4) or by using 6mm allen key (N).

• OPTION B: Grommet Base Installation
  Use 6mm allen key(N) to detach the bolt(B5), clip plate(B2),bottom plate(B3) and bolt Y(B4) from clamp(B).

  • Install the grommet base plate(K) to the pole (F) using bolt (I). Install pole(F) with bolt Y(B4) and support plate(J). Tighten bolt Y (B4) or by using 6mm allen key (N).

STEP 2 : Arm Installation

Install the middle head(E), wire clip(G) and swivel arm(A) to the pole. Fasten the bolt with supplied 6mm Allen key (N)

STEP 3: Attach Monitor

• OPTION A: Flat Back Monitor
  Attach the VESA plate (D) to the back of monitor and secure it by using a 6 mm Allen Key (N) to tighten screws (M-A).
  Do not tighten the screws excessively or your monitor might be damaged.

• OPTION B: Curved Back Monitor
  Attach the VESA plate (D) to the back of monitor and secure it by using a 6 mm Allen Key (N) to tighten screws (M-B) along with spacers (M-C).

STEP 4 : Hang Monitor

Slide the monitors onto the head of swivel arm.Install the security bolt (H). Make sure the security bolt is installed before you rotate the monitor

Guideline to adjust monitor tilting angle.

STEP 5: Adjust Tension

For the intended functioning of the mount, you may need to adjust the tension of Upper Arm (A) in accordance with your monitor weight by 6 mm Allen Key (N).

• Situation 1: Arm falls down

  • Upper Arm with monitor falls down and fails to stay where intended.

• Solution:

  • Turn the inside screw counterclockwise(“+”direction) to increase gas spring tension until the arm can stay as intended.

• Situation 2: Arm rises up

  • Upper Arm with monitor rises up and fails to stay where intended.

• Solution:

  • Turn the inside screw clockwise(“-”direction) to decrease gas spring tension until the arm can stay as intended.

Note2:
For how many circles the screw should be turned, please refer to the table below.

STEP 6 : Cable Management

Remove bottom plastic covers from gas spring arm (A) .Run cables from monitor through bottom of arm. Reattach plastic covers as shown in diagram. Store Allen keys (M,N) in wire clip (G) for future use.

Adjust as Desired

Adjust monitor position and rotation.

• Note: To ensure stability, the tightness of the rotating axis has been preset, so it would be kind of difficult to rotate the VESA plate.
• Suggestion: Please attach the monitor first, then hold the two sides of it with both hands, and rotate vigorously. If that doesn’t work out, please do not hesitate to ask for our help.

Product Dimensions

CAUTION AND MAINTENANCE:

• Don’t allow children to climb, stand, hang, or play on any part of monitor or stand.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>