Midea EU-OSK105 Smart Kit User Manual

June 16, 2024
Midea

Midea-logo Midea EU-OSK105 Smart Kit

IMPORTANT NOTE

Read the manual carefully before installing or connecting your Smart kit(Wireless module). Make sure to save this manual for future reference.

SPECIFICATION

  • Model: EU-OSK105,US-OSK105, EU-OSK106,
  • US-OSK106,EU-OSK109, US-OSK109
  • Antenna Type: Printed PCB Antenna
  • Frequency Band: 2400-2483.5MHz
  • Operation Temperature:0 C~45 C/32 F~113 F
  • Operation Humidity: 10%~85%
  • Power Input: DC 5V/500mA
  • Maximum TX Power: <20dBm

PRECAUTIONS

  • Applicable system: iOS, Android.

    • Please keep your APP up to date with the latest version.
    • Due to the special situation may occur, we explicitly claim below: Not all of the Android and iOS systems are compatible with the APP. We will not be responsible for any issue as a result of the incompatibility.
  • Wireless safety strategy
    Smart kit only supports WPA-PSK/WPA2-PSK/WPA3-SAE encryption and no encryption .WPA-PSK/WPA2-PSK/WPA3-SAE encryption is recommended.

  • Cautions

    • Due to different network situations, the control process may return time-out sometimes. If this situation occurs, the display between the board and the App may not be the same, please do not feel confused.
    • The phone camera needs to be 5 million pixels or above to make sure scans the QR code well.
    • Due to different network situations, sometimes, request time-out could happen, thus, it is necessary to do network configuration again.
    • The APP system is subject to update without prior notice for product function improvement. The actual network configuration process may be slightly different from the manual, the actual process shall prevail.
    • Please Check The Service Website For More information.

DOWNLOAD AND INSTALL THE APP

CAUTION: The following QR Code is only available for downloading the APP. It is totally different with the QR code packed with SMART KIT.

Midea-EU-OSK-105-Smart-Kit-fig-1

  • Android Phone users: scan the Android QR code or go to google play, search ‘NetHome Plus” app, and download it.
  • iOS users: scan the iOS QR code or go to the APP Store, search the ‘NetHome Plus” app, and download it.

INSTALL THE SMART KIT(wireless module)

Note : Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit may be slightly different. The actual shape shall prevail.

  1. Remove the protective cap of the smart kit.

  2. Open the front panel and insert the smart kit into the reserved interface(For model A). Open the front panel, unscrew the display cover, and remove it, then insert the smart kit into the reserved interface(For model B). Reinstall the display cover. Model B
    WARNING : This interface is only compatible with SMART KIT(Wireless module) provided by the manufacturer. For the smart device access, replacement, and maintenance operations must be carried out by professional staff.

  3. Attach the QR code packed with SMART KIT to the side panel of the machine or other convenient location, ensuring it is convenient to be scanned by the mobile phone.
    Kindly remember: It is better to reserve the other two QR Codes in a safe place or take a picture and save it on your phone.

USER REGISTRATION

  • Please ensure your mobile device is connected to a Wireless router. Also, the Wireless router has already connected to the Internet before doing user registration and network configuration.
  • It is better to log in to your email box and activate your registration account by clicking the link in case you forget the password. You can log in with the third-party accounts.

Midea-EU-OSK-105-Smart-Kit-fig-5

  1. Click “Create Account
  2. Enter your email address  and password, and then click “Register “

NETWORK CONFIGURATION

Cautions

  • It is necessary to forget any other around network and make sure the Android or iOS device just connects to the Wireless network you want to configure.
  • Make sure the Android or iOS device Wireless function works well and can be connected back to your original Wireless network automatically.

Kindly reminder

The user must finish all the steps in 8 minutes after powering on an air conditioner, otherwise, you need to power on it again.

Using Android or iOS device to do network configuration

  • Make sure your mobile device has already been connected to the Wireless network that you want to use. Also, you need to forget other irrelevant Wireless network in case it influences your configuration process.
  • Disconnect the power supply of the AC.
  • Connect the power supply of the AC, and continuously press the “LED DISPLAY” or “DO NOT DISTURB” button seven times in 10 seconds.
  • When the AC displays “AP”, it means that the AC Wireless has already entered into “AP” mode. Note There are two ways to finish the network configuration:
  • Network configuration by Bluetooth scan
  • Network configuration by selecting appliance type

Network configuration by Bluetooth scan

Note : Make sure the Bluetooth of your mobile device is working.

Midea-EU-OSK-105-Smart-Kit-fig-7

  1. Press “ + Add Device ”
  2. Press “Scan for nearby devices”Midea-EU-OSK-105-Smart-Kit-fig-8
  3. Wait for smart devices to find it, then click to add it
  4. Select Home Wireless, enter the passwordMidea-EU-OSK-105-Smart-Kit-fig-9
  5. Wait connecting to the network
  6. Configuration Success, you can modify the default name.Midea-EU-OSK-105-Smart-Kit-fig-10
  7. You can choose an existing name or customize a new name.
  8. Bluetooth network configuration is successful, now you can see the device in the list.

Network configuration by selecting appliance type

Midea-EU-OSK-105-Smart-Kit-fig-11

  1. If the Bluetooth network configuration is a failure, please select the appliance type.Midea-EU-OSK-105-Smart-Kit-fig-12
  2. please follow the above steps to enter “AP” mode.Midea-EU-OSK-105-Smart-Kit-fig-13
  3. Choose the network configuration method.
  4. Choose the “Scan the QR code” method . NOTE : Steps 3 and 4 are applicable to Android system only. iOS system does not need these two steps.Midea-EU-OSK-105-Smart-Kit-fig-14
  5. When choosing the “Manual Setup” method(Android). Connect to the wireless network(iOS)
  6. Please enter the passwordMidea-EU-OSK-105-Smart-Kit-fig-15
  7. Network configuration is successful
  8. Configuration Success, you can see the device in the list.

NOTE :

  • When finishing the network configuration, APP will display success cue words on the screen.
  • Due to different internet environment, it is possible that the device status still displays “offline”. If this situation occurs, it is necessary to pull and refresh the device list on the APP and make sure the device status becomes “online”. Alternatively, the user can turn off the AC power and turn on it again, the device status will become “online” after a few minutes.

HOW TO USE APP

Please ensure both your mobile device and air conditioner are connected to the Internet before using app to control the air conditioner via the Internet, please follow the next steps:

  1. Midea-EU-OSK-105-Smart-Kit-fig-16 Click ” Sign in
  2. Choose the air conditioner.
  3. Thus, the user can control the air conditioner’s on/off status, operation mode, temperature, fan speed, and so on.

NOTE: Not all the functions of the APP is available on the air conditioner. For example: ECO, Turbo, Swing function, please check the user manual to find more information.

SPECIAL FUNCTIONS

Schedule
Weekly, the user can make an appointment to turn the on or off AC on a specific time. Users also can choose circulation to keep the AC under schedule control every week.

Midea-EU-OSK-105-Smart-Kit-fig-18

Midea-EU-OSK-105-Smart-Kit-fig-19 Sleep

User can customize their own comfortable sleep by setting a target temperature.

Midea-EU-OSK-105-Smart-Kit-fig-20

Check
Users can simply check the AC running status with this function. When finishing this procedure, it can display the normal items, abnormal items, and detailed information.

Midea-EU-OSK-105-Smart-Kit-fig-21

Share Device
The air conditioner can be controlled by multi-users at the same time by the Share Device function.

Midea-EU-OSK-105-Smart-Kit-fig-22

  1. Click “Shared QR code”
  2. QR code display.
  3. The other users must log in Nethome Plus app first, then click Add Share Device on their own mobile, and then ask them to scan the QR code.
  4. Now the others can add the shared device.

CAUTIONS

  • Wireless module models: US-OSK105, EU-OSK105
    • FCC ID:2AS2HMZNA21
    • IC:24951-MZNA21
  • Wireless module models: US-OSK106, EU-OSK106
    • FCC ID:2AS2HMZNA22
    • IC:24951-MZNA22
  • Wireless module models: US-OSK109, EU-OSK109
    • FCC ID: 2AS2HMZNA23
    • IC: 24951-MZNA23

This device complies with Part 15 of the FCC Rules and it contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the f following g two conditions:

  1. This device may not cause harmful int references ce; and
  2. This device must accept any in here re nice, including inte rf erence that may use and desired op erat ion of the device

Only operate the device in accordance with the instructions supplied. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.

The company will not be liable for any issues and problems caused by the Internet, Wireless Router and Smart Devices. Please contact the original provider to get further help

DECLARATION OF CONFORMITY

Hereby, we declare that this Smart kit is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the full DoC is attached.
(European Union products only)

CS374-APP(OSK105-OEM) 16110800000529 20230515

Documents / Resources

| Midea EU-OSK105 Smart Kit [pdf] User Manual
EU-OSK105 Smart Kit, EU-OSK105, Smart Kit, Kit
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals