MY23 Trike Hybrid

Specifications

• Product: Trike Hybrid
• Status: 22.05.2023
• Sticker frame serial number (attached to top tube): 3
• Permissible total weight (Trike Hybrid): 14
• Trike Family Hybrid Maximum payload: 15

Product Information

About these original instructions

The following instructions provide information on the Trike
Hybrid. It includes conventions, positional designations,
definitions of terms, and figures.

General notes on these original instructions

These instructions provide general notes and additional
applicable documents for the Trike Hybrid.

For your safety

Using your Trike Hybrid as intended is important for your
safety. The following sections provide guidelines on the intended
use and who can ride the Trike Hybrid.

Using your Trike Hybrid as intended

The Trike Hybrid is designed for specific purposes. It is
important to use it according to its intended design and
purpose.

Who can ride your Trike Hybrid?

The Trike Hybrid can be ridden by individuals who meet the
necessary requirements and have the ability to operate the product
safely.

How may you ride your Trike Hybrid?

Instructions on how to ride and operate the Trike Hybrid are
provided in this section.

How to use the box?

This section provides instructions on using the box feature of
the Trike Hybrid.

What applies to rear carriers/child seats/bicycle

trailers?

Information on legal requirements and considerations when using
rear carriers, child seats, or bicycle trailers with the Trike
Hybrid are provided in this section.

Structure and functions

This section provides an overview of the general structure and
functions of the Trike Hybrid, including information on the
electric drive, brakes, shifting, handlebars, handlebar stem,
suspension fork, and box.

Before using for the first time

Instructions on getting your Trike Hybrid ready to ride and
getting to know your Trike Hybrid before its first use are provided
in this section.

Before every trip

A checklist for checking the Trike Hybrid as a whole and
specifically checking the wheels before every trip is provided in
this section.

FAQ

Q: What is the permissible total weight of the Trike

Hybrid?

A: The permissible total weight of the Trike Hybrid is 14.

Q: What is the maximum payload for the box?

A: The maximum payload for the box is 15.

Q: Which screw connections may I tighten myself?

A: Information on which screw connections you can tighten
yourself is provided in section 3.5.1.

Q: What legal requirements apply to riding the Trike

Hybrid?

A: Legal requirements for riding the Trike Hybrid are covered in
section 2.1.7.

Operation manual
TRIKE HYBRID

Legal notice
Pending System GmbH & Co. KG Ludwig-Hüttner-Straße 5-7 95679 Waldershof Germany Telephone: +49 (0) 9231-97 007 80 Fax: +49 (0) 9231-97 007 199 E-mail: info@cube.eu Internet: www.cube.eu
23_HY-CA-TRIKE, 1, en_US © 2023

Status: 22.05.2023

Sticker frame serial number (attached to top tube)

3 TRIKE HYBRID

Table of contents

3.3

Permissible total weight (Trike

Hybrid)……………………………………….. 14

1 About these original instructions………….. 5

1.1

Conventions……………………………… 5

1.1.1

Descriptions………………………………. 5

1.1.2

Positional designations…………… 5

1.1.3

Definition of terms…………………… 5

3.4

Trike Family HybridMaximum

payload………………………………………. 15

3.4.1

Maximum payload for the box. 15

3.4.2

Maximum payload depending

on the permissible total

weight (calculation examples).. 15

1.1.4

Figures……………………………………….. 6

3.5

Screw connections…………………… 17

1.2

General notes on these orig-

inal instructions………………………… 7

3.5.1

Which screw connections may

you tighten yourself?……………….. 17

1.2.1

Scope………………………………………….. 7

3.5.2

Torques and screw connec-

1.2.2

Additionally applicable docu-

tions……………………………………………. 18

ments…………………………………………. 7 4 Structure and functions……………………………. 18

2 For your safety…………………………………………….. 7

2.1

Using your Trike Hybrid as

intended…………………………………….. 8

4.1

General information/model

overview…………………………………….. 18

4.2

Electric drive……………………………… 18

2.1.1

What is your Trike Hybrid

designed for?…………………………….. 8

2.1.2

Who can ride your Trike

Hybrid?………………………………………. 8

2.1.3

How may you ride your Trike

Hybrid?………………………………………. 8

4.3

Brakes…………………………………………. 18

4.4

Shifting………………………………………. 19

4.5

Handlebars, handlebar stem….. 19

4.6

Suspension fork………………………… 20

4.7

Box……………………………………………… 20

2.1.4

How to use the box?………………… 8

5

Before using for the first time…………………. 21

2.1.5

What applies to rear carriers/

child seats/bicycle trailers?……… 9

5.1

Getting your Trike Hybrid

ready to ride……………………………… 21

2.1.6

On which surfaces are you

5.2

Getting to know your Trike

allowed to ride your Trike

Hybrid………………………………………… 21

Hybrid?………………………………………. 9

6 Before every trip…………………………………………. 22

2.1.7

What legal requirements apply

to riding the Trike Hybrid?………. 9

6.1

Checking the Trike Hybrid as a

whole………………………………………….. 22

2.1.8

Accessories and conversions….. 10

6.2

Checking the wheels……………….. 23

2.2

Avoiding typical dangers………… 10

6.2.1

Checking the installation………… 23

2.2.1

Dangers due to faulty final

assembly……………………………………. 10

6.2.2

Checking the rims…………………….. 23

2.2.2

Dangers for certain groups of

people (e.g. children)………………. 11

6.2.3

Checking the spokes……………….. 23

6.2.4

Checking the tyres……………………. 23

2.2.3

Dangers when (first) cycling

with your Trike Hybrid…………….. 11

6.3

Checking the saddle and seat

post…………………………………………….. 25

2.2.4

Hazards during handling………… 12

2.2.5

Dangers due to improper care,

maintenance and repair………….. 13

2.3

Residual risks…………………………….. 13

3 Scope of delivery, technical data……………. 14

3.1

Scope of delivery……………………… 14

3.2

Identification/type plate…………. 14

6.4

Checking the handlebars and

handlebar stem………………………… 25

6.5

Checking the handlebar

attachments………………………………. 26

6.6

Checking the headset……………… 26

6.7

Checking the suspension fork… 27

6.8

Checking the brakes………………… 27

TRIKE HYBRID 4

6.9

Checking the manual drive

8 Malfunctions while cycling………………………. 42

(chain)………………………………………… 28

8.1

Trike Hybrid (general cycling

6.10

Checking the electric drive

behaviour)…………………………………. 43

components……………………………… 28

8.2

Electric drive……………………………… 43

6.11

Checking the lighting………………. 28

8.3

Shifting, manual drive (chain)… 44

6.12

Checking the box……………………… 29

8.4

Brakes…………………………………………. 44

6.13

Checking the front carrier……….. 29

8.5

Frame, seat post and suspen-

6.14

Checking the mudguards

sion fork……………………………………… 44

(wheel guards)………………………….. 29

8.6

Mudguards, lighting………………… 45

7 Adjusting and using the Trike Hybrid…… 30

8.7

Wheels and tyres………………………. 45

7.1

Essential factors to take into consideration……………………………. 30

9

After a fall or accident……………………………….. 46

7.1.1

Adjustments require expert knowledge………………………………… 30

10 Cleaning and maintaining the Trike Hybrid……………………………………………………………. 46

7.1.2

Note the minimum insertion

11 Transporting the Trike Hybrid………………… 47

depth of the seat post……………… 30 12 Decommissioning the Trike Hybrid for a

7.2

Adjusting the seat position…….. 31

longer period……………………………………………….. 47

7.3

Adjusting the seat height……….. 31

13 End-of-life disposal……………………………………. 48

7.4

Adjusting the suspension fork.. 32

14 Guarantee/warranty………………………………….. 48

7.4.1

What is the total weight

14.1

Warranty…………………………………….. 48

range?………………………………………… 32

14.2

Warranty services……………………… 48

7.4.2

Adjusting the preload……………… 32

14.3

Warranty conditions………………… 48

7.5

Operating the electric drive……. 33

14.4

The claim to warranty/ guar-

7.6

Setting up and operating the

antee is invalidated………………….. 49

shifting……………………………………….. 33 15 Inspections/service plan…………………………… 49

7.7

Operating the brakes………………. 33 16 Handover checklist…………………………………….. 49

7.8

Operating the kickstand /

parking brake……………………………. 34

7.9

Using the box……………………………. 36

7.9.1

Opening the soft top……………….. 36

7.9.2

Closing the soft top………………….. 37

7.9.3

Removing/attaching the soft

top………………………………………………. 38

7.9.4

Installing the child seat in the

box……………………………………………… 39

7.9.5

Use child seat …………………………… 40

7.9.6

Removing the child seat from

the box……………………………………….. 41

7.9.7

Cleaning the child seat……………. 41

7.10

Using the front carrier……………… 41

7.10.1 Retrofitting the front carrier…… 41

7.10.2 Loading the front carrier…………. 41

5 TRIKE HYBRID
1 About these original instructions
Dear Customer,
we would like to congratulate you on your choice of a Trike Hybrid from our company and thank you for your trust.
With the purchase of this Trike Hybrid, you have acquired a high-quality, environmentally friendly means of transport that you will enjoy whilst pro- moting your health.
Your specialist bicycle dealer is also very important for you after advice and final assembly. The dealer is your contact for maintenance, inspections, conversions and repairs of all kinds.
If you have any questions about our product, please contact your specialist bicycle dealer.

Overview
6 7

28

3

29

5

1

2 4

8

20

9 10 11 12 13 14 15 16 17

19 18

1 Frame 2 Seatpost 3 Saddle 4 Seatpost clamp 5 Soft top 6 Box 7 Rear light 8 Mudguard 9 Tyre 10 Rim 11 Spoke 12 Hub 13 Brake disc 14 Brake 15 Chain 16 Chainguard 17 Kickstand 18 Chainring 19 Engine 20 Crank arm 21 Suspension fork 22 Headset 23 Stem 24 Front light 25 Brake lever

27

26

25 24
23 22

21

26 Display 27 Remote 28 Handlebars 29 Shifter
1.1 Conventions
1.1.1 Descriptions
CAUTION
The symbol for danger of burns indi- cates high temperatures above 45°C (coagulation of protein), which can cause burns in humans.
DANGER
The yellow warning triangle in combi- nation with the signal word “Danger” indicates dangers that can lead to severe personal injury (up to death).
WARNING
The yellow warning triangle in combination with the signal word “Warning” indicates dangers that can lead to slight personal injury and damage to property.
NOTICE
The exclamation mark (without tri- angle) alerts you to information that requires special attention.

1.1.2 Positional designations
Whenever these original instructions refer to “right,” “left,” “front” or “rear,” this information always refers to the position of the cyclist (in the direction of travel).

1.1.3 Definition of terms
Definition of terms

Trike Hybrid

Whenever these original instruc- tions refer to “Trike Hybrid” in gen- eral, it refers to any of the models described here.

EPAC

E lectrically P ower A ssisted C ycles).

All Trike Hybrid models described in these original instructions belong to the EPAC class of cycles.

Wobble

A concentricity deviation on the rim is colloquially referred to as a “wobble”.

bar

Common unit for air pressure.

Torque

Also called tightening torque. Indi- cates how “firmly” a screw is tight- ened.

DIN EN ISO

German Institute for Standardiza- tion.
European standard

Specialist bicycle dealer

Authorised specialist bicycle dealer

Our company only allows selected bicycle dealers to sell and repair our products.
Whenever these original instruc- tions refer to “bicycle dealer” in general, they specifically mean spe- cialist bicycle dealers authorised by us.

Manual force

The force that an average adult person with moderate to medium effort applies with one hand.

HWK

In Germany: Chamber of Trade

IHK

In Germany:

Chamber of Commerce

Nm

newton-metre;

Unit for torque

psi

pound per square inch;

American unit for pressure;

1 psi = 0.06894 bar

StVO

German Road Traffic Act (Straßenverkehrsordnung)

StVZO

German Road Traffic Licensing Reg- ulations
(Straßenverkehrszulassungsord- nung)

TRIKE HYBRID 6

Correct screw con- nection

The “Correct screw connection” term refers to the condition in which the screw heads are firmly in contact with the part over their entire surface.

Screw con- nection, not correct

A loose screw is often indicated by a protruding screw head.

1.1.4 Figures
NOTICE
The figures shown in these original instructions are for illustrative pur- poses and apply to all model versions of the Trike Hybrid.

7 TRIKE HYBRID
1.2 General notes on these orig- inal instructions
DANGER
Dangers if the original instructions are not observed!
Failure to observe these original instructions can lead to dangerous cycling situations, falls, accidents and material damage.
– In addition to these original instructions, make sure that you have all documents that may be applicable in your national lan- guage ( Chapter 1.2.2 “Addi- tionally applicable documents” on page 7).
– Before using your Trike Hybrid for the first time, please read the original instructions and any other applicable documents carefully.
– Keep the original instructions (including the applicable docu- ments) and pass them on together with your Trike Hybrid if you ever sell it or give it away.
– In addition to these original instructions, you will receive a separate delivery certificate for your Trike Hybrid. Make sure that all fields in the delivery cer- tificate are filled out completely. It is your responsibility to check your Trike Hybrid as prescribed and to have any work done on it.
– If parts of this original operating manual are not clear to you, consult your bicycle dealer.
1.2.1 Scope
These original instructions were prepared on the basis of the DIN 79010-2020:02 standard. It applies exclu- sively to Trike Hybrid models from our company from model year 2023 onwards.
These original instructions are only valid if they were enclosed with the Trike Hybrid from our company when it was purchased.

DANGER
Dangers due to (unfamiliar) tech- nical innovations!
New technical findings may lead to changes in the models, their oper- ation and to new models them- selves.
– Ask your specialist bicycle dealer about the accuracy and validity of these original instructions.
– Have your specialist bicycle dealer confirm that you have received the correct set of documents (original instructions and component instructions) for your Trike Hybrid.
1.2.2 Additionally applicable docu- ments
With the constant development in the bicycle sector, the range of components that you can use with your Trike Hybrid is also growing. It is therefore almost impossible to produce generally applicable original instructions that describe all available components in detail.
For this reason, it is possible that these original instruc- tions ­ in addition to the delivery certificate ­ are accompanied by one or more separate component instructions.
NOTICE
The enclosed component instruc- tions contain detailed information from the component manufacturer on the respective component and are part of the overall scope of the orig- inal instructions.
Refer to the delivery certificate to find out whether the original instructions for your Trike Hybrid includes additional separate component instruc- tions.
2 For your safety
NOTICE
In this chapter, you will find infor- mation on intended use, important safety instructions and a list of (unavoidable) residual risks.

2.1 Using your Trike Hybrid as intended
DANGER
Dangers if not used as intended!
Your Trike Hybrid is designed for a specific use.
Design, material properties, etc. are designed for this intended use.
If you use your Trike Hybrid for purposes other than those for which it is intended, such misuse can lead to material failure, mal- functions of important assemblies (e.g. brakes) and other issues!
– Observe all information on intended use in Chapter 2.1.1 “What is your Trike Hybrid designed for?” on page 8 and Chapter 2.1.8 “Accessories and conversions” on page 10.
– Never use your Trike Hybrid in any way other than described here/not for its intended pur- pose.
– Consult your bicycle dealer if you are uncertain about the intended use of your Trike Hybrid.
2.1.1 What is your Trike Hybrid designed for?
Your Trike Hybrid is designed as a means of transport for transporting or taking along children and luggage (objects).
The tests of your Trike Hybrid or the tests of the components were carried out in accordance with the standard DIN 79010-2020:02.
2.1.2 Who can ride your Trike Hybrid?
NOTICE
Your Trike Hybrid is designed for one (single) cyclist. This cyclist controls and rides the Trike Hybrid.
The following requirements must be met for proper use:

TRIKE HYBRID 8
The seat position (saddle/handlebar) on the Trike Hybrid is correctly adjusted for the cyclist.
The cyclist has the right height/stature for the Trike Hybrid. If you are unsure, ask your specialist bicycle dealer.
The cyclist (including clothing) weighs a maximum of 115 kg (= maximum cyclist weight).
The cyclist is at least 16 years old. Persons younger than 16 years of age are not allowed to ride this Trike Hybrid themselves/operate it as a cyclist.
2.1.3 How may you ride your Trike Hybrid?
Sit with your rear end on the saddle or ride out of the saddle, i.e. with a standing pedalling motion.
Hold the left grip of the handlebars with your left hand and the right grip of the handlebars with your right hand.
Do not take your hands off the handlebars while cycling. Your Trike Hybrid is not suitable for handsfree cycling!
Use your Trike Hybrid with or without the electric drive.
Use your Trike Hybrid exclusively as a means of transport as described in these original instruc- tions.
When transporting children or luggage, observe the information in Chapter 7.9 “Using the box” on page 36
Observe the national and regional regulations when cycling in road traffic.
2.1.4 How to use the box?
NOTICE
The box belongs to your Trike Hybrid as intended. The box and the upper frame must never be removed or modified.
NOTICE
Observe the information on the permissible total weight of your Trike Hybrid and the maximum pay- load (see Chapter 3.3 “Permis- sible total weight (Trike Hybrid)” on page 14 und Chapter 3.4 “Trike Family HybridMaximum pay- load” on page 15).
The box is designed for the transport of:

9 TRIKE HYBRID

children aged 9 months to 7 years, who can sit independently and have a max. body weight of 22kg. Please also refer to chapter Chapter 7.9 “Using the box” on page 36.
Objects/luggage (up to 60 kg). Please also refer to chapter Chapter 7.9 “Using the box” on page 36.
NOTICE
Children and/or luggage must not distract or obstruct the cyclist (e.g. obstruct visibility).
2.1.5 What applies to rear carriers/ child seats/bicycle trailers?
NOTICE
Please observe the information on the permissible total weight of your Trike Hybrid Chapter 3.3 “Per- missible total weight (Trike Hybrid)” on page 14.
Front carrier
Your Trike Hybrid is suitable for retrofitting with a front carrier.
Front carriers that you can use with your Trike Hybrid are suitable for carrying light luggage (e.g. in a bicycle basket).
Ask your specialist bicycle dealer about suitable front carriers that you can use with your Trike Hybrid.
For the use of the front carrier, please observe the information in Chapter 7.10 “Using the front carrier” on page 41.
Child seats
Your Trike Hybrid is not designed for use with a child seat.
With the additional weight of a child seat including the child, the permissible total weight would be exceeded.
NOTICE
Only the box of your Trike Hybrid is intended to carry children!
Bicycle trailer
Your Trike Hybrid is not designed for use with a bicycle trailer.

2.1.6 On which surfaces are you allowed to ride your Trike Hybrid?
All bicycles of our company are divided into cate- gories, which specify the field of application of the respective bicycle.
Your Trike Hybrid corresponds to a Category 2 bicycle and is therefore suitable for trips on paved roads, such as:
Asphalt roads and bike paths, Hardpack paths with sand, gravel or similar surface
materials, Hardpack hiking trails with no or only a few roots,
bumps, stones and holes.
When cycling, all wheels must be in constant contact with the ground or may only briefly lose contact with the ground due to minor unevenness such as roots.
Expressly not allowed are cycling manoeuvres such as:
Jumps Doing wheelies No-handed cycling, (Sudden) braking where the rear wheels loses con-
tact with the ground
2.1.7 What legal requirements apply to riding the Trike Hybrid?
NOTICE
Your Trike Hybrid may not be used on public roads without equipment in accordance with StVZO.
To comply with the current StVZO, your Trike Hybrid must have the fol- lowing equipment features, among others:
– Two independently operating brakes
– A bell – Battery-powered lighting for the
front (white light) and rear (red light) in accordance with StVZO – Reflectors/reflective strips on the tyres in accordance with StVZO

TRIKE HYBRID 10

The full text of the regulations can be found in the StVZO for journeys in Germany.
For use outside Germany, please observe the traffic regulations applicable in your country.
If you have any questions about the legal regula- tions, please contact your bicycle dealer or the relevant authorities.
2.1.8 Accessories and conversions
Many cyclists want to convert their bike and adapt it to their specific needs. Fork, seat, handlebars, pedals, brakes, tyres, suspension elements ­ there are many ways to modify a bike after purchase. This also applies to the Trike Hybrid, although to a different extent due to its design.
Always keep in mind, however:
NOTICE
Working on the Trike Hybrid, even work that seems to be easy, requires sound training, in-depth knowl- edge and a wealth of experience.
Improperly performed work and modifications to your Trike Hybrid and the use of unsuitable accessories can lead to dangerous cycling situa- tions, falls, accidents and material damage.
If the Trike Hybrid is tampered with or altered in any way, all liability, guar- antee and warranty claims against the manufacturer and dealer are void.
If you comply with the specifications listed below, you can equip your Trike Hybrid with suitable accessories.
Only use ISO-certified accessories. Exceptions are bicycle computers and bottle cages if they are selected and fitted by a specialist bicycle dealer. Consult your specialist bicycle dealer when selecting accessories.
Never exchange or modify components for which this is expressly prohibited by the manufacturer.
Our company prohibits the replacement/conversion of the following components:
Stem Seat post Fork Brake system, including brake discs Wheels (exception: tyres, see blow).

The handlebars may only be replaced with suitable ISO-certified handlebars by a specialist bicycle dealer (see Chapter 4.5 “Handlebars, handlebar stem” on page 19).
Tyres may only be replaced with tyres of equal or higher load capacity in accordance with the manufacturer’s approval.
Retrofitting or converting the electric drive is not permitted on all Trike Hybrid models! In addi- tion, no manipulation of the software or the like (tuning) is permitted.
The composition of all parts of your Trike Hybrid must not be changed.
Have all mounting, conversion, service and other work on your Trike Hybrid carried out exclusively by your bicycle dealer
NOTICE
Please note that the person who makes changes to the Trike Hybrid is also liable for them.
2.2 Avoiding typical dangers
Safety instructions
The use of your Trike Hybrid is naturally associated with certain risks. In the following sections, you will find corresponding safety instructions.
Follow the safety instructions to reduce the gen- eral risks when using your Trike Hybrid.
2.2.1 Dangers due to faulty final assembly
DANGER
Danger in case of improper final assembly of the Trike Hybrid!
Improper final assembly of your Trike Hybrid can lead to dangerous cycling situations, falls, accidents and material damage.
– Have your specialist bicycle dealer confirm the correct final assembly and the adjustment of the correct seat position for you.

11 TRIKE HYBRID
2.2.2 Dangers for certain groups of people (e.g. children)
DANGER
Danger when used unattended!
Children or persons with physical or mental health conditions may not be able to correctly assess or handle dangerous situations in connection with the Trike Hybrid.
– Observe the information in the original instructions for the elec- tric drive.
– Hold the Trike Hybrid securely with both hands when children enter the box or when you sit children in the box. Never allow children to enter the box unattended or sit unat- tended in the box. Never lock the soft top when children are in the box, either while riding or when stationary.
– Children must not play with the battery and charger or handle them unattended.
– Secure your Trike Hybrid and place it so that children/unau- thorised persons cannot access it.

2.2.3 Dangers when (first) cycling with your Trike Hybrid
DANGER
Danger due to unfamiliar handling of the Trike Hybrid !
Your Trike Hybrid behaves differ- ently than a regular bicycle in many ways due to its design, elec- tric drive and higher weight.
If you are not used to cycling the Trike Hybrid or underestimate its differences, this can lead to dangerous cycling situations, falls, accidents and material damage.
– Familiarise yourself with the operation and handling of the components of the electric drive using the original instructions for the electric drive.
– Practice cycling your Trike Hybrid in a suitable environ- ment away from traffic.
– When getting to know your Trike Hybrid, try out different typical cycling situations such as:
– Kicking off and braking
– Navigating corners and turning
– Cycling with the box fully loaded and empty, etc.
– Never ride your Trike Hybrid no handed!
Hold the handlebars securely with both hands while cycling. Only take one hand off the handlebars when necessary (e.g. hand signal when turning) and hold the handlebars securely with the other hand while doing so. Never take both hands off the handlebars at the same time!
An unfavourable combination of speed, payload and ground con- ditions can affect the steering behaviour of your Trike Hybrid. This can lead to dangerous cycling situations (accident, fall, etc.).

DANGER
Danger for inattentive and careless cyclists!
Riding your Trike Hybrid requires your attention ­ especially when cycling on the road.
Incautiousness, lack of considera- tion and failure to take precautions can lead to dangerous cycling sit- uations, falls, accidents and mate- rial damage.
– Observe the applicable traffic regulations in your country.
– Keep yourself informed about and observe any applicable national regulations for trans- port and cargo bikes.
– Wear a helmet when cycling.
– Ride with foresight and defen- siveness.
– Do not ride under the influ- ence of alcohol or if you are otherwise intoxicated (e.g. after taking medication, anaesthesia, etc.).
– Ride in such a way that you have your Trike Hybrid under control at all times and can react cor- rectly in a sudden dangerous sit- uation.
– In wet conditions, the effect of the brakes may diminish. The braking distance increases.
– When cycling the Trike Hybrid, wear suitable clothing that does not restrict your freedom of movement or visibility.
– Only ride with close-fitting leg- wear. Wide items of clothing can get caught on the Trike Hybrid and lead to serious falls.
– Do not exceed the permissi ble total weight ( Chapter 3.3 “Permissible total weight (Trike Hybrid)” on page 14).

TRIKE HYBRID 12
2.2.4 Hazards during handling
DANGER
Danger due to incorrect handling!
Compared to a regular bike without electric drive, your Trike Hybrid is, among other things, heavier, bulkier and probably more complex to operate (electric drive).
You may therefore want or need to handle your Trike Hybrid ompletely differently to a conven- tional bicycle.
– Pay particular attention to the safety relevant specifications of the electronic components of the drive system (charger and battery). These can be found in the original instructions of the electric drive.
There is a risk of electric shock if electronic components are handled improperly!
– Your Trike Hybrid is heavy and bulky: if necessary, please ask for help if you need to lift your Trike Hybrid, e.g. for adjustment work or testing.
– Do not take your hands off the handlebars while cycling. An unfavourable combination of load distribution and road sur- face may cause steering wobble. If you hold the handlebars securely, you reduce the associ- ated risks.
– Do not ride over high curbs or ledges with your Trike Hybrid and avoid tight corners.

13 TRIKE HYBRID
CAUTION
Risk of burns on contact with heated components!
After longer descents the brake discs can be very hot. The compo- nents of the electric drive (battery, motor unit) can also heat up during operation.
Contact with heated components can cause burns!
– Do not touch the brake discs immediately after a descent. Let the brake discs cool down before touching them.
– To check the temperature, tap the respective component very briefly with your naked finger: If it feels hot, wait a few minutes and repeat the test until the component has cooled down.
– With regard to a possible risk of burns on contact with com- ponents of the electric drive, please refer to the information in the manufacturer’s instruc- tions for the electric drive.

2.2.5 Dangers due to improper care, maintenance and repair
DANGER
Danger if work is carried out improperly on the Trike Hybrid!
Correct and regular care and main- tenance help to maintain the cycling comfort and safety of your Trike Hybrid.
If you carry out work on the Trike Hybrid without the necessary expertise, this can lead to malfunc- tions of important assemblies (e.g. brakes) etc.!
– Observe the instructions for reg- ular cleaning and care as well as for regular maintenance work and intervals (see Chapter 10 “Cleaning and maintaining the Trike Hybrid” on page 46 und Chapter 15 “Inspections/ service plan” on page 49).
– Contact authorised bicycle dealers exclusively for any queries and repairs.
– Have your Trike Hybrid checked by your bicycle dealer after a fall/ accident or if your Trike Hybrid has been overloaded.
Please also refer to Chapter 9 “After a fall or accident” on page 46.

2.3 Residual risks
Naturally, you cannot take every danger into account and therefore cannot avoid every dangerous situation.
Even if all safety instructions are taken into account, unavoidable residual risks remain for you as cyclist of your Trike Hybrid, e.g.:
Unexpected cycling manoeuvres or misconduct of other road users
Sudden changes in the road surface (e.g. due to black ice)
Unforeseen material defects/unforeseen wear and tear can lead to material breakage or malfunctions

NOTICE
Be careful when using/cycling on your Trike Hybrid.
This allows you to detect dangerous situations early on and react accord- ingly.
3 Scope of delivery, tech- nical data
3.1 Scope of delivery
Complete bicycle (in some cases without pedals) Original instructions including delivery certificate,
as well as all other relevant component instruc- tions from manufacturers whose parts were installed.
3.2 Identification/type plate
The following information can be found on your Trike Hybrid:
Designation of the series/class and type Serial number on the underside of the frame (con-
sists of year/month of manufacture and manufac- turer abbreviation) Permissible total vehicle weight for the Trike Hybrid ( Chapter 3.3 “Permissible total weight (Trike Hybrid)” on page 14) Maximum permissible payload for the box ( Chapter 3.4 “Trike Family HybridMaximum pay- load” on page 15); Information/marking of the electric drive compo- nents.
NOTICE
If a carrier has been retrofitted, the indication for its maximum payload is located on the rack itself (as an embossing).

TRIKE HYBRID 14

3.3 Permissible total weight (Trike Hybrid)
NOTICE The permissible total weight is a fixed, unchangeable value that must not be exceeded! On the basis of the specified permis- sible total vehicle weight you are responsible for determining the maximum permissible payload for your Trike Hybrid. Please also note the information in Chapter 3.4 “Trike Family Hybrid- Maximum payload” on page 15.
The following example calculation shows which influ- encing factors must be taken into account for the determination of the actual total weight.
Example calculation
tare weight of the Trike Hybrid
+ body weight of the rider (with clothing)
+ weight of the payload in box
+ weight of additional luggage (e.g. back- pack/luggage bags)
+ Weight of additional attachments
Permissible total weight

The unladen weight of your Trike Hybrid model and the maximum permissible total weight are shown in the following table.
NOTICE
To find out which model your Trike Hybrid is, please refer to the delivery certificate.

Unladen weight

Permissible total weight

Trike Family Hybrid 220 kg 75 kg

15 TRIKE HYBRID

NOTICE
Please note that the unladen weight specified here is the weight in the basic equipment.
If you subsequently replace compo- nents or add attachments to your Trike Hybrid, the unladen weight of your Trike Hybrid will change.
3.4 Trike Family HybridMax- imum payload
The wording “maximum payload” distinguishes between:
the maximum permissible payload for the box (=design dependent load capacity of the box) Chapter 3.4.1 “Maximum payload for the box” on page 15. vs.
the maximum permissible payload for your Trike Hybrid (in total) considering the permissible total weight for your Trike Hybrid Chapter 3.4 “Trike Family HybridMaximum payload” on page 15. The maximum permissible payload for your Trike Hybrid (in total) includes all loads that are transported with the Trike Hybrid, including, for example, luggage that you transport on a retro- fitted carrier or in a backpack.
3.4.1 Maximum payload for the box
DANGER
Dangers in case of changes to the box!
The Trike Hybrid is designed as a means of transport for people and objects. If you modify the box provided for this purpose or even remove it from the frame, this can lead to unforeseeable dangerous situations.
– Never disassemble or modify the box and/or the upper frame.
The theoretically maximum permissible payload for the box of your Trike Hybrid is 60 kg.

NOTICE
The maximum payload in the box, i.e. the weight of the load (children or objects) must not exceed 60 kg.
The specification of “60 kg” refers to the load capacity/ construction of the box, not to the Trike Hybrid as a whole. This means that the box of your Trike Hybrid can basically withstand a load (children/objects) weighing up to 60 kg.
In order to determine the actual maximum permis- sible payload for the box, you must take into account not only the load capacity of the box but also the permissible total weight for your Trike Hybrid.
If a payload of 60 kg in the box would exceed the the permissible total weight for your Trike Hybrid, the actual maximum permissible payload is less than 60 kg.
To determine the actual maximum permissible payload in the box, observe the examples in Chapter 3.4 “Trike Family HybridMaximum pay- load” on page 15.

3.4.2

Maximum payload depending on the permis- sible total weight (calculation examples)

Depending on the design of some components of your Trike Hybrid, you will find information on the maximum weight with which you may load the respec- tive component.
If all these theoretically permissible individual load capacities are fully utilised, you will usually exceed the permissible total weight for your Trike Hybrid:

Calculation with theoretically permissible indi- vidual load capacities
Unladen weight of Trike Family Hybrid 750: + 75 kg
Max. cyclist weight: + 115 kg
Max. payload of box (Family version with child seat): + 44 kg
Max. payload of permissible carrier models: + 20 kg
Total weight of the Trike Family Hybrid 750: = 254 kg (permissible total weight exceeded by 34 kg)
Result/conclusion: The actual total weight (254 kg) would in this case exceed the permissible total weight (220 kg). You are not allowed to use your Trike Hybrid in this way! The following calculation examples no. 1-3 show how to determine the maximum payload for your Trike Hybrid depending on the permissible total weight.
Calculation example no. 1
Intrinsic weight of the Trike Family Hybrid 750: + 75 kg
Actual cyclist weight: + 101 kg
Actual payload of the box: + 44 kg
Actual total weight of the Trike Family Hybrid 750: = 220 kg (permissible total weight reached)
Result/conclusion on calculation example no. 1: In this case, the actual total weight (220 kg) equals the permissible total weight).

TRIKE HYBRID 16
You may use the Trike Hybrid in this way, but you cannot transport any other load (e.g. on the carrier)!
Calculation example no. 2
Unladen weight of the Trike Family Hybrid 750: + 75 kg
Actual cyclist weight: + 99 kg
Actual payload of the box: + 25 kg
Unladen weight of the carrier: + Approx. 1 kg
Actual payload of the carrier: + 20 kg
Actual total weight of the Trike Family Hybrid 750: = 220 kg (permissible total weight reached)
Result/conclusion on calculation example no. 2: In this case, the actual total weight (220 kg) equals the permissible total weight). Since the box is not loaded with the full weight of the maximum per- missible payload for the box, the additional load can be transported on the carrier. You may use the Trike Hybrid in this way! Important: The unladen weight of the carrier (as a retrofitted attachment) must be taken into account.

17 TRIKE HYBRID
Calculation example no. 3
Unladen weight of the Trike Family Hybrid 750: + 75 kg
Actual cyclist weight: + 80 kg
Actual payload of the box: + 44 kg
Intrinsic weight of the carrier: + Approx. 1 kg
Actual payload of the carrier: + 20 kg
Actual total weight of the Trike Family Hybrid 750: = 220 kg (permissible total weight reached)
Result/conclusion on calculation example no. 3: In this case, the actual total weight (220 kg) equals the permissible total weight. If the (lower) cyclist weight permits, the box and carrier can each be loaded with the full weight of their maximum per- mitted payload. You may use the Trike Hybrid in this way Important: The unladen weight of the carrier (as a retrofitted attachment) must be taken into account.

3.5 Screw connections
3.5.1 Which screw connections may you tighten yourself?
DANGER
Danger if work is carried out improperly!
If you tamper with bolts or connec- tions not mentioned here, you may unknowingly damage your Trike Hybrid or even impair its construc- tion/stability.
This can lead to unforeseeable dan- gerous situations.
– If, e.g. when checking your Trike Hybrid, you discover that bolts have loosened that are not listed in the following over- view, consult your bicycle dealer immediately.
– Do not use your Trike Hybrid until the screw connections have been tightened by your bicycle dealer.

NOTICE
Screw connections, that are not in the following overview may only be tightened/fixed by a specialist bicycle dealer.
You may retighten the following screw connections yourself ­ under consideration of the corresponding torques ­ if the screw connection has loosened:

Part

Connection

Seat clamp

Seat post

Height adjustment of the seat post

Seat post clamp on the frame

Cable guide screw

3.5.2 Torques and screw connections

Part

Manufacturer

Model/type

Connection

Satori

Sorata

Seat clamp

Seat post

Height adjustment of the seat post

Aluminium frame

Seat post clamp on the frame

Cable guide screw

TRIKE HYBRID 18

Type of connection 1 screw Quick release 1 screw 1 screw each

Tightening torque (Nm) 9-10
8-10 1.5

4 Structure and func- tions
4.1 General information/model overview
NOTICE
The Trike Hybrid is currently available in one model version with three dif- ferent colours.

Model des- Model ignation number

Trike Family Hybrid 750

689612 689622 689632

Equipment fea- tures (excerpt)
Disc brake, hub gear system, 1x battery (750 Wh)

NOTICE
To find out which model your Trike Hybrid is, please refer to the delivery certificate.

4.2 Electric drive
NOTICE
Detailed information on the e-drive and its components can be found in the original instructions for the electric drive.

Your Trike Hybrid is equipped with an electric drive and belongs to the class of electrically assisted bicycles (EPAC). The electric drive consists of different components. The core of the drive is the electric motor, which is supplied with energy for operation by at least one battery. The electric drive supports you when pedalling up to a maximum speed of 25 km/h. If you reach a speed of more than 25 km/h, the electric motor stops sup- porting you and you drive the Trike Hybrid exclusively with muscle power. As soon as your speed drops below 25 km/h, the elec- tric motor starts up again and supports you when ped- alling. The electric motor is controlled by at least one con- trol element (e.g. on the handlebars). This allows you to set, among other things, how strongly the electric motor supports you when pedalling (assist level).
Observe the original instructions for the electric drive.
4.3 Brakes
NOTICE
Disc brakes must be run in. The full braking power develops only after the running-in procedure (see Chapter 5.2 “Getting to know your Trike Hybrid” on page 21).
Your Trike Hybrid has two independent disc brakes on the front and rear wheel hubs.

19 TRIKE HYBRID Furthermore, the brake on the rear wheels has a parking lock lever to always be able to park the bike safely.
Fig. 1: Brake disc on the front wheel
Fig. 2: Brake disc on the rear wheel Both disc brakes are operated with the corresponding brake levers (hydraulic).
Fig. 3: Brake lever on the handlebars

4.4 Shifting
Hub gear system (Enviolo)
Your Trike Hybrid is a equipped with a hub gear system.
The hub gear system allows you to continuously adjust the gear ratio to the cycling conditions and thus enjoy optimum cycling comfort.
The continuously variable hub gear system works with NuVinci® technology. Using the planetary transmis- sion in the rear wheel hub, you change from one gear ratio to the next (stepless shifting).
High ratio (=high gear):
High effort when pedalling, low cadence.
Low ratio (=low gear):
Low effort when pedalling, high cadence.
For the number of gears of your hub gear system, please refer to the indication on the hub body or on the shift lever.
4.5 Handlebars, handlebar stem
DANGER
Dangers if the components are not replaced properly!
Due to its design, the steering assembly of your Trike Hybrid is usually more complex than that of a regular bike (without box).
The handlebars and handlebar stem of your Trike Hybrid must meet special requirements and must not be replaced without fur- ther precautions.
If, for example, you intend to combine a longer handlebar stem with wider handlebars, this circum- stance could lead to a blockage or complete loss of function of the steering and/ or brakes!
– Always keep in mind, how- ever: The handlebars and/or handlebar stem may only be replaced with suitable ISO-certi- fied components by a specialist bicycle dealer.

Fig. 4: Handlebars with handlebar stem

TRIKE HYBRID 20
The box, frame and overall construction are optimally matched, therefore no changes may be made to the box or the overall construction.
To be able to cope with everyday use, the box is made of robust EPP, a material that is also used for motor- cycle helmets.
As intended, always use the box with the mounted soft top. This protects the load and children from the weather (e.g. wind, rain) and from ersetzen durch: objects (stones, insects) etc. In addition, the lock- able canopy provides protection against unauthorized access to the load.

4.6 Suspension fork
Your Trike Hybrid has front suspension damping in the form of a suspension fork.

Fig. 6: Closed soft top, key is in the lock To lock or unlock the soft top, turn the key coun-
terclockwise or clockwise. Never close the soft top when children are in the
box, either while cycling or when stationary. For transporting children, install the child seat included in the scope of delivery or optionally avail- able in the box. The child seat and the fastening system used to install the child seat in the box are specially designed for the Trike Hybrid and the box. Only use the original child seat designed and
approved by the manufacturer of the Trike Hybrid with the Trike Hybrid. Do not use any other child seats with the Trike Hybrid. Depending on the model, unused belt parts can be stowed in a recess under the seat.
Fig. 5: Suspension fork Please also refer to Chapter 7.4 “Adjusting the
suspension fork” on page 32.
4.7 Box
Your Trike Hybrid has a box for transporting children or objects/luggage.

21 TRIKE HYBRID
Fig. 7: Belt buckles in recess
5 Before using for the first time
5.1 Getting your Trike Hybrid ready to ride
DANGER Dangers due to improper handling/ testing! A Trike Hybrid that is not ready for cycling can lead to dangerous cycling situations, falls, accidents and material damage. The same danger exists if you are not yet familiar with your new Trike Hybrid and its operation. – Handle your Trike Hybrid care-
fully from the beginning and follow the instructions regarding the (regular) inspection of your Trike Hybrid.
1. Have your bicycle dealer confirm the correct final assembly and check the readiness of your Trike Hybrid for cycling.
NOTICE You may make certain fine adjustments and small changes yourself. Please note the information in Chapter 7 “Adjusting and using the Trike Hybrid” on page 30.
2. Have your bicycle dealer adjust the correct saddle position for you.

3. Do not use your Trike Hybrid until your bicycle dealer has familiarised you with the technology and operation of your Trike Hybrid through instruction.
4. Perform a test on your Trike Hybrid as described in the sections of Chapter 6 “Before every trip” on page 22.
NOTICE
If you familiarise yourself with the correct condition of your Trike Hybrid when new, you will be able to recognise deviations from the cor- rect condition more easily later.
Self-made photos can be a valuable help.
5.2 Getting to know your Trike Hybrid
NOTICE
For inexperienced cyclists, the gen- eral risk of accidents and injuries increases massively.
Familiarise yourself step by step with the functions and cycling characteristics of your Trike Hybrid so that you can use your Trike Hybrid safely.
In particular, make yourself familiar with the func- tion and operation of the following components.
Brakes
Familiarise yourself with the assignment of the brake levers. Which brake lever actuates the front brake, which brake lever actuates the rear brake?
Familiarise yourself slowly with the braking per- formance of your Trike Hybrid on safe terrain. The brakes have a strong braking effect. Excessive use of the brake levers can cause the respective wheel to lock and thus cause a fall.
Be aware that the load distribution of the load in the box also affects the braking performance of your Trike Hybrid.
Run in your disc brakes. To run in your disc brakes, follow the instructions in the component instruc- tions of the brake manufacturer.

NOTICE
Disc brakes must be run in. The full braking power develops only after the running-in procedure.
Electric drive
Familiarise yourself with the operation of the con- trol element.
What adjustments can you make while cycling and how?
Familiarise yourself slowly with the different levels of support of your Trike Hybrid on safe terrain.
Observe the information in the manufacturer’s original operating manual of the electric drive regarding setting options, performance, etc.
Steering
Please note the special design features in the steering of your Trike Hybrid.
If you steer and brake hard at the same time or ride too fast with little weight (unloaded box) on loose ground (e.g. gravel), the wheels can loose traction when you turn.
Box
Pay attention to how the load in the box influ- ences the handling of your Trike Hybrid.
How does your Trike Hybrid handle when riding with the box fully loaded?
How is the handling affected when the box is par- tially loaded or empty?
Practice cycling with the load that you are likely to transport most often with your Trike Hybrid in everday life.
What influence the load in the box has on the handling of your Trike Hybrid also depends on what it is: Is the load moving (e.g. children)? How is the load distributed (a heavy object or uniform distribution?)? etc.
If you primarily want to transport your child(ren) with the Trike Hybrid, practice cycling with your children in the box.
If children are not used to cycling in the box, are anxious or do not remain calm in the box, this can lead to dangerous cycling situations, falls and accidents.
Familiarise yourself with the handling of the soft top (opening/closing) and, if applicable, the child seat (seat belt system, etc.) so that you can act quickly if necessary.

TRIKE HYBRID 22
6 Before every trip
6.1 Checking the Trike Hybrid as a whole
DANGER
Dangers if the check is omitted!
A Trike Hybrid that is not ready for cycling can lead to dangerous cycling situations, falls, accidents and material damage.
There is a possibility that your Trike Hybrid may have fallen over during the unattended time or that strangers may have tampered with it.
– Before each journey, check that your Trike Hybrid is safe to ride.
– Contact your bicycle dealer immediately if you notice that the actual condition of the Trike Hybrid deviates from the target condition.
– Only use your Trike Hybrid again when it has been properly repaired by your bicycle dealer.
1. Perform a visual inspection of the entire Trike Hybrid.
In the process, check the following:
all fixing screws for a correct screw connec- tion.
the entire Trike Hybrid for dents, chip- ping, deep scratches and other mechanical damage.
whether loose parts have become caught somewhere on the Trike Hybrid, e.g. twigs, pieces of fabric.
whether the reflective strips on the tyres are clean and clearly visible. If the tyres do not have reflective strips, clearly visible, clean reflectors must be fitted.
2. If necessary, remove loose parts (e.g. twigs) and check whether, for example, your wheels have been damaged by the loose parts.
3. Fix screw connections that have loosened, if these are screw connections that you are allowed to tighten yourself (see Chapter 3.5 “Screw connections” on page 17).

23 TRIKE HYBRID
4. If necessary, clean the reflective strips on the tyres or clean and attach spoke reflectors. If the reflective strips are no longer visible or it is not possible for you to securely reattach the spoke reflectors, consult your bicycle dealer immediately.
NOTICE Always make sure that the reflective strips on the tyre or alternatively spoke reflectors in accordance with StVZO on your Trike Hybrid are present, securely fastened and not cov- ered or dirty.
5. Contact your specialist bicycle dealer if the visual inspection reveals defects of any kind which you cannot remedy as described here.
6.2 Checking the wheels
NOTICE Front and rear wheels are also called wheels.
Your Trike Hybrid has three wheels: one front and two rear wheels. Each wheel consists of the following: Hub, Brake Disc, Spokes, Rim, Rim tape and tyres.
6.2.1 Checking the installation
1. Vigorously shake both wheels at right angles to the direction of travel: The wheels must not move in the clamp mecha- nism. No cracking or crunching noises must be audible.
2. Contact your bicycle dealer if the inspection reveals defects.
6.2.2 Checking the rims
Check the rims for wobbling:

To do so, lift up your Trike Hybrid and turn the front and rear wheels in turn. Pay attention to the distance between the frame stay or fork leg.
The maximum permissible deviation per revolu- tion is 2 mm.
6.2.3 Checking the spokes
1. Check the spokes on the front and rear wheels regularly.
All spokes must be tight and undamaged.
Even individual spokes that have become loose or damaged can cause consequential damage.
NOTICE
Do not use your Trike Hybrid if spokes have become loose or damaged or if spokes are missing!
2. Consult your bicycle dealer if spokes have become loose or damaged.
6.2.4 Checking the tyres
DANGER
Risk of a burst tyre or sudden loss of pressure!
If the valves are tilted, the valve base can break off while cycling, which causes a sudden loss of pres- sure in the tyre.
Incorrect tyre pressure reduces cycling comfort and in the worst case the tyre can burst at full speed.
– Check the tyres of your Trike Hybrid regularly as described here.
– Only carry out the work on the tyres mentioned here yourself if you have the necessary exper- tise.
– If you do not have the neces- sary expertise for certain work or are unsure, contact your bicycle dealer.

TRIKE HYBRID 24

1. Check the valve position.
The valves must point towards the centre of the wheel. Angled valves can shear off while cycling, causing a sudden loss of pressure in the tyre (= the air escapes abruptly, high risk of accident/ fall).
Correct incorrectly aligned valves if you have the necessary expertise or consult your specialist bicycle dealer.
2. Check the air pressure.
NOTICE
The optimum air pressure depends on the type of tyre with which your Trike Hybrid is equipped.
As a rule, you will find an indi- cation of the maximum per- missible air pressure directly on the rims (sticker) and tyres (printed on).
If you are unsure, ask your spe- cialist bicycle dealer.
NOTICE
Some air pressure values are given in “psi.”
You can use the following table to convert the values.
psi 30 40 50 60 70 80
bar 2.1 2.8 3.5 4.1 4.8 5.5
NOTICE
The higher the body weight, the higher the tyre pressure must be.
Check the air pressure with a tyre pressure gauge. Simple devices often accompany bicycle inner tubes, high-quality devices are available in specialist shops.
Observe the relevant operating instructions for handling the tyre pressure gauge or have your specialist bicycle dealer show you how to use it.
3. If necessary: Correct the air pressure, taking into account the maximum permissible air pres- sure for rims and tyres.

Excessively low air pressure: Increase the air pressure with a suitable pump.
Excessively high air pressure: Release an appropriate amount of air through the valve and then check the air pressure again.
Using a bicycle pump with pressure gauge, you can check the air pressure while inflating: First let some air out of the tyre and then increase the air pressure to the desired level.
NOTICE
There are different types of valves.
All valves can be covered with a dust protection cap. After removing the cap, both Schrader and Dunlop valves can be pumped up by placing the pump head directly on the valve.
With the Sclaverand valve, you must first unscrew the small locknut from the valve as far as it will go, and after pumping, screw it all the way back towards the valve.
If necessary, your specialist bicycle dealer will show you how to operate the valves on your tyres.
4. Check the tyre tread.
The tyre rubber must be present over its entire surface with the original profile.
Consult your bicycle dealer if you find that the tread pattern is worn or if you do not know how to check the tyre tread correctly.

25 TRIKE HYBRID
NOTICE Always pay attention to an optimal tyre profile. With a worn profile, the gen- eral risk of accidents and inju- ries increases massively.

Check the seat and seat post for tightness.
Try to twist the seat and seat post into the frame with your hands. The seat and seat post must not be able to be twisted.
Try to move the saddle in its clamp by using oppo- site up and down movements with manual force.
If the saddle and/or seat post can be moved, tighten them (see Chapter 7.2 “Adjusting the seat position” on page 31 and Chapter 7.3 “Adjusting the seat height” on page 31).

Fig. 8: Optimum tyre tread (left); Worn tyre tread (right)
5. Check your tyres for external damage and wear.
The tyre fabric under the rubber layer must not be visible.
There must be no bulges or cracks.
6. Check the mounting of your tyres.
Lift the front and rear wheels and turn them by hand. The tyre must run true. There must be no vertical or lateral runout.
6.3 Checking the saddle and seat post
DANGER
Danger if the minimum insertion depth is not observed!
If the insertion depth is too shallow, the seat post may come loose.
A loose seat post can lead to dangerous cycling situations, falls, accidents and material damage.
– Make sure that the seat post is inserted to the correct depth (see Chapter 7.1.2 “Note the minimum insertion depth of the seat post” on page 30).

6.4 Checking the handlebars and handlebar stem
DANGER
Risk if damaged or tampered with.
The handlebars and handlebar stem are very important components for your cycling safety.
Damage and alterations as well as errors in assembly can result in very serious falls.
– If you discover defects on the handlebars or the handlebar stem or if you have doubts about them, you must not con- tinue to use your Trike Hybrid under any circumstances.
– Under no circumstances should you attempt to remedy defects in the handlebars or handlebar stem yourself or attempt to replace the components your- self.
Contact your specialist bicycle dealer if you discover any defects in the handlebars or handlebar stem.

TRIKE HYBRID 26

1. If necessary, align the handlebar stem and han- dlebars correctly:
The handlebar stem must be aligned parallel to the front wheel rim for the check, while the handlebars must be at right angles to the front wheel rim.

Try to twist the handlebars in the handlebar stem by hand.
3. Contact your specialist bicycle dealer if you discover any defects in the handlebars or han- dlebar stem.
6.5 Checking the handlebar attachments
1. Check shifters, brake levers and grips for their attachment.
Hold the handlebars with one hand. Try to turn the brake lever with the other
hand.
2. Retighten the fixing screw(s) if attachments on the handlebars have become loose.

6.6 Checking the headset
NOTICE The headset contains the bearings for the steerer tube to rotate in the head tube.

Fig. 9: Stem and handlebars correctly aligned 2. Check the assembly of the handlebars and
handlebar stem as described below.
NOTICE
It must not be possible to twist or move any of the parts. There must be no cracking or crunching noises.
Lean the front wheel against a wall or let a second person hold the front wheel.

Fig. 10: Headset on handlebars Check the headset as described below.
NOTICE
It must be possible to steer the front wheel freely and without play in both directions.
Stand next to your Trike Hybrid and hold it with both hands on the handlebar grips.
Pull the front brake, keep it pulled. Push your Trike Hybrid back and forth with
short, jerky movements.

27 TRIKE HYBRID
There must be no play in the headset: There should be no audible or palpable knocking or any grating sounds. If you notice that the headset has play, con-
tact your specialist bicycle dealer, to have the steerer clamp adjusted correctly.

brake lever and the handlebar grip, even when the brake lever is pulled to the max- imum limit stop.

6.7 Checking the suspension fork
Check your suspension fork as described below.
Pull the front brake and keep it applied. Press with your body weight on the handlebars so
that the suspension fork compresses.
The fork must spring in and out smoothly.
There must be no cracking or crunching noises.
Clamp the front wheel between your legs and try to pull up the Trike Hybrid by the fork crown Take care not to move or damage the headlamp and fender.
The stanchions must not come loose from the lower legs or from the fork crown.
For testing, also observe the instructions in the sepa- rate component instructions for your suspension fork.
6.8 Checking the brakes
DANGER
Danger of brake failure!
A malfunction of the brakes is life threatening.
– Check your brake system partic- ularly carefully.
– Clean dirty brake discs imme- diately: Dirty brake discs can reduce the braking effect.
1. Check the function of your hydraulic disc brake as described below.
Press both brake levers as far as they will go while standing still.
Make sure that the brake levers cannot be pulled completely onto the handlebar grip: There must always be a gap between the

Fig. 11: Brake lever fully applied
Try to push the Trike Hybrid with the brakes applied. All wheels must remain locked.
2. Pull the brake caliper alternately in all direc- tions with manual force.
The brake caliper must not move.
3. Check the tightness of your brake system:
Operate the respective brake lever while standing still and hold it.
Check the brake system from the brake lever through the lines to the brakes.
Hydraulic fluid must not leak out at any point.
4. Check the brake disc for damage:
There must be no notches, chips, deep scratches or other mechanical damage and the brake disc must be of the optimum thickness.
5. Lift the front and rear wheels and turn them by hand:
The brake disc must not have any lateral runout.
6. Have the wear on the brake pads and the brake disc checked by your specialist bicycle dealer (see Chapter 16 “Handover checklist” on page 49):
The brake disc must not fall below the minimum thickness. The minimum thickness can be found in the enclosed component instructions of the brake manufacturer.

7. Check your brake discs for dirt, especially oil and grease.
NOTICE
Dirty brake discs must be cleaned immediately.
NOTICE
During multi-day trips, the brake disc and brake pads can wear heavily.
Accordingly, replacement brake pads can be helpful on such trips.
– Only carry out the replace- ment yourself if you are familiar with this work. For more information, consult your specialist bicycle dealer.
– If you are not able to carry out the replacement your- self, have it carried out by your bicycle specialist.
6.9 Checking the manual drive (chain)
1. Check the chain ring for concentricity without lateral movements while standing.
The chain rings and sprockets must not have any lateral runout and there must be no for- eign bodies between the individual chain rings/ sprockets. Remove foreign bodies if this is easily possible.
2. Check the chain for damage.
The chain must not be damaged at any point by e.g. bent chain link plates, protruding rivet pins, etc. or have fixed, immovable chain links.
3. Check that the chain runs smoothly over the jockey wheels and does not jump.
4. Have the chain wear checked by a specialist bicycle dealer using a suitable measuring tool.

TRIKE HYBRID 28
6.10 Checking the electric drive components
NOTICE
Observe the separate original instructions for the electric drive: In it, you will find all detailed informa- tion of the component manufacturer.
Perform a visual inspection of the electric drive components. Check whether any components show visible damage.
Refer to the original instructions for the electric drive to find out about the necessary test steps for the components of the electric drive.
6.11 Checking the lighting
DANGER
Danger if the lighting fails! The failure of front headlights and rear lights can lead to dangerous cycling situations in darkness and/ or poor visibility.
– Only use your Trike Hybrid in such visibility conditions if your lighting system is fully func- tional.
Check the function of your lighting as described below: Switch on the light at the control element when the bike is parked. The front headlight and the rear light must be on.

Fig. 12: Headlight (front)

29 TRIKE HYBRID
Fig. 13: Rear light (rear)
6.12 Checking the box
Perform a visual inspection of the box. Check whether the side walls of the box or the floor show visible damage (inside and outside).
6.13 Checking the front carrier
NOTICE If your Trike Hybrid is equipped with a front carrier (optional), you must also check it regularly. Observe the separate component instructions for the front carrier: In them, you will find all detailed infor- mation of the component manufac- turer.

DANGER
Danger from loose parts!
Loose front carrier parts can block the wheel and lead to serious falls.
Contact your specialist bicycle dealer and have the front carrier correctly fastened.
Do not use your Trike Hybrid again until the front carrier has been secured.
Shake the rear carrier by hand at right angles to the direction of travel. The front carrier fastenings must not become
loose. The front carrier must not touch the tyre.
6.14 Checking the mudguards (wheel guards)
DANGER
Danger from loose parts!!
Loose mudguards can block the wheel and lead to serious falls.
– Contact your specialist bicycle dealer and have all mudguards correctly fastened. Do not use your Trike Hybrid again until the mudguards have been secured.
Check the mounting of your mudguards.
NOTICE
The mudguard and its fastening stays must not be bent or damaged.
While standing, move the front wheel vigorously back and forth using steering movements.
Carefully shake the front mudguard with your hand. ­ The fastening stays must not become loose. ­ No part of the mudguards may touch the wheels.

7 Adjusting and using the Trike Hybrid
7.1 Essential factors to take into consideration
7.1.1 Adjustments require expert knowledge
DANGER
Danger due to incorrect adjust- ment or operation of your Trike Hybrid!
Many adjustments to the Trike Hybrid require expert knowledge. If you carry out adjustment work on the Trike Hybrid without the necessary expertise, this can lead to dangerous falls, accidents and material damage.
– Only carry out the adjustment work on the Trike Hybrid described in these original instructions yourself if you have the appropriate basic technical knowledge and experience, as well as the appropriate tools.
– Only carry out adjustment work on the Trike Hybrid itself for which you will find descriptions in this original operating manual or other applicable documents.
– In case of doubt and/or if you have any questions, please contact your specialist bicycle dealer.

TRIKE HYBRID 30
7.1.2 Note the minimum insertion depth of the seat post
DANGER
Danger if the minimum insertion depth is not observed!
If the insertion depth is too shallow, the inserted component may become unstable, break or come loose.
A loose seat post can lead to dangerous cycling situations, falls, accidents and material damage.
– Always ensure the correct inser- tion depth when adjusting the seat post.
– Never go below the minimum insertion depth of the seat post.
– If necessary, observe the infor- mation on the minimum inser- tion depth in the component instructions for the seat post.
DANGER
Danger if inserted to the wrong depth!
Many adjustments to the Trike Hybrid require expert knowledge. If you carry out adjustment work on the Trike Hybrid without the necessary expertise, this can lead to dangerous falls, accidents and material damage.
– Only carry out the adjustment work on the Trike Hybrid described in these original instructions yourself if you have the appropriate basic technical knowledge and experience, as well as the appropriate tools.
– Only carry out adjustment work on the Trike Hybrid itself for which you will find descriptions in this original operating manual or other applicable documents.
– In case of doubt and/or if you have any questions, please contact your specialist bicycle dealer.

31 TRIKE HYBRID
Minimum seat post insertion depth There is a mark on the seat post which indicates the minimum insertion depth of the seat post in the seat tube. When the clamp is fixed, the marking on the seat post must not be visible, but must be in the seat tube.
Fig. 14: Marking for the minimum seat post insertion depth
7.2 Adjusting the seat position
NOTICE To adjust the seat position, you need a hex bit socket and a torque wrench of the appropriate size.
To adjust the horizontal position or inclination of your seat: 1. Loosen the clamping bolt by a few turns until
the seat can be moved easily and/or the inclina- tion can be adjusted. 2. Move the seat to the desired position.
NOTICE When changing the horizontal position, pay attention to the adjustment range on the saddle rails.
3. Fix the adjustment by tightening the clamping screws as follows: Tighten the clamping screws alternately by a quarter to half turn until the prescribed torque is reached (see chapter Chapter 3.5 “Screw connections” on page 17).
4. If the marking on the seat post cannot be found in chapter Chapter 3.5 “Screw connections” on page 17 under “Tightening Torques,” consult your specialist bicycle dealer.

7.3 Adjusting the seat height
NOTICE The telescopic seat post is fixed with a clamp in the seat tube of the frame. The clamp is fixed with an integrated lever. When attaching an (additional) clamp (e.g. for anti-theft protection), observe the information in the manu- facturer’s instructions for the clamp. 1. Loosen the clamp by turning the integrated lever counterclockwise. 2. Bring the saddle with the seat post into the desired position for your saddle height.
NOTICE Please note the minimum inser- tion depth of the seat post (see chapter Chapter 7.1.2 “Note the minimum insertion depth of the seat post” on page 30).
Fig. 15: Adjusting the seat height 3. The saddle nose points in the direction of travel.

TRIKE HYBRID 32

4. Fix the clamp by turning the integrated lever clockwise. Make sure that the post is completely fixed, cannot be twisted and that the integrated lever of the saddle clamp is aligned in the direction of travel.
Fig. 16: Fixed seat clamp 5. For further fine adjustment, the telescopic part
of the seat post can still be adjusted to your needs. To do this, open the quick-release lever of the seat post and adjust the height accordingly, then close the lever again completely so that the seat post is fixed.

7.4.1 What is the total weight range?
Suspension forks with elastomers and/or steel springs are each suitable for a certain total weight range (= cyclist weight + luggage). This weight range usually covers a span of 20 kg.
NOTICE
The weight range for which the sus- pension elements in your suspension fork are suitable can be found in the separate component instructions of the suspension fork manufacturer and/ or consult your specialist bicycle dealer.
Contact your specialist bicycle dealer if your total weight is outside the specified range.
Your specialist bicycle dealer can replace the suspen- sion fork elements if necessary and thus adapt them to your needs.
7.4.2 Adjusting the preload
You can adjust the preload of the suspension fork. To do this, increase the preload on the fork using the adjuster.

7.4 Adjusting the suspension fork
NOTICE
Observe the separate component instructions for the suspension fork. In them, you will find all detailed information of the compo- nent manufacturer.

Fig. 17: Suspension fork preload adjuster
By changing the preload, the breakaway torque of the fork changes, i.e. with a higher preload the fork only cmpresses at higher operating forces.
If the fork is preloaded too much, the suspension travel will be reduced accordingly.
To adjust the preload and for basic set-up of the suspension fork, follow the instructions in the enclosed component instructions of the suspen- sion fork manufacturer.

33 TRIKE HYBRID

7.5 Operating the electric drive
NOTICE
Observe the separate original instructions for the electric drive: In them, you will find all detailed infor- mation of the component manufac- turer.
For adjusting and operating the electric drive and for the basic set-up of the electric drive and its components, follow the instructions in the included original instructions of the drive manu- facturer.
7.6 Setting up and operating the shifting
NOTICE
Please note the separate compo- nent manual for the hub gears: In them you will find all the detailed information from the component manufacturer.
To adjust the hub gears and for basic handling of the hub gears follow the information in the enclosed component instructions of the gear manufacturer.

7.7 Operating the brakes
DANGER
Danger when cycling without braking!
Incorrect operation of the brakes can lead to dangerous cycling sit- uations, falls, accidents and mate- rial damage.
– Familiarise yourself with the operation of the brakes.
– Determine which brake lever actuates the front or rear brake.
Operate the respective brake lever several times while standing still:
You can observe the opening and closing of the brake pads on the corresponding brake disc.
– Be careful not to brake and steer hard at the same time.
If you steer and brake hard at the same time or ride too fast with little weight (unloaded box) on loose ground (e.g. gravel), the front wheel can lose traction when you turn.
– Furthermore, the rear wheel brake has a parking lock lever. This lever can be used to park the wheel on a slope, to additionally secure it when loading and unloading the box or getting into and out of the box. The operation of the parking lever is explained in the chapter Chapter 7.8 “Oper- ating the kickstand / parking brake” on page 34.
To apply the brake, pull the brake lever towards the handlebars.
NOTICE
You will achieve the best braking effect if you operate both brake levers in the correct dosage at the same time.

7.8 Operating the kickstand / parking brake
Park your Trike Hybrid / activate parking function
NOTICE
Danger in case of improper parking!
Ideally, park your Trike Hybrid on flat terrain.
If you park the bike on a slope, always park it in the direction of travel uphill (= front wheel points uphill).
1. Stand next to your Trike Hybrid and hold it with both hands on the handlebars.
2. Fold out the kickstand with your foot and tilt the front frame onto the stand.

TRIKE HYBRID 34
3. Activate the rear brake parking function by pushing the larger of the two levers away from the handlebars. The smaller lever automatically folds out as well.

4. Turn the lever until you hear a click and it locks into place. The smaller lever springs away from the larger lever and locks in place.

35 TRIKE HYBRID
5. Pull the brake lever towards the handlebar until you hear several clicks.

Setting off/releasing the parking lever
1. To release the parking function, push the smaller lever towards the larger lever.

The parking function is now activated and the bike is safely parked.
2. To fold in, pull both levers fully back towards the handlebars. Be careful when doing this, as the wheels can now move freely again.

3. Tilt the front frame and unload the stand, then fold it in with the foot.
Your bike is now ready to ride.

7.9 Using the box
WARNING
Risk of injury by using without soft top or with open soft top.
When the soft top is removed or open, children can reach into moving parts of the Trike Hybrid (e.g. rear wheel) during the ride or be hit by objects such as stones that have been thrown up and thus be injured.
– Use the box only with the soft top.
– Always make sure that the soft top is closed and fastened cor- rectly before start the ride.
For ventilation, the canopy has vents on the front and back and adjustable vents.
To open or close the adjustable vents, manually adjust the slats in the appropriate direction.

TRIKE HYBRID 36 1. Press the two buttons on the soft top.
Fig. 19: buttons pressed – soft top slightly open 2. Lift the soft top only slightly.
The gas strut continues to raise the soft top until it is fully open.

Fig. 18: Adjustable air vents
For additional ventilation, the plastic windows on both sides can also be opend. The mesh underneath lets in more fresh air and at the same time prevents stones and other objects from flying up into the box.
7.9.1 Opening the soft top
WARNING
Risk of injury
If the footboard is not properly unfolded und engaged, the Trike Hybrid can tip over when children get on or off or when the box is loaded.
– Always fold the footboard down completely and snap it into place on the seat stay.

Fig. 20: Soft top open, footboard folded in

37 TRIKE HYBRID 3. Pull the footboard upwards out of its lock.

7.9.2 Closing the soft top
1. Pull the footboard upwards out of its lock on the seat stay.

Fig. 21: Pull the footboard upwards 4. Lower the footboard towards the front.

Fig. 24: Fold in foodboard
2. Fold the foodboard up completely so that it is fully vertical.
3. Press the footboard down vertically to lock it in position.

Fig. 22: Fold out the footboard
If the foodboard is fully unfolded, it locks onto the seat stay and stabilizes the standing Trike Hybrid.

Fig. 25: Push the footboard down into the locking device
4. Press the soft top carefully down, so that it lowers onto the box from above.

Fig. 23: Unfolded footboard

5. To lock the soft top in the closed position, press down the front of the soft top with a little pres- sure so that it audibly engages on both sides.

TRIKE HYBRID 38
4. Lift the soft top out of the hinges on both sides of the box.

Click

Click

Fig. 26: closed soft top
7.9.3 Removing/attaching the soft top
NOTICE
You can remove the soft top to clean the interior of the box. However, always note that use of the Trike Hybrid is only permitted with the soft top mounted and fully closed.
To remove the soft top: 1. Fold up the soft top Chapter 7.9.1 “Opening
the soft top” on page 36. 2. Hold down the safety button on the cotter-pin
and pull it out of its guide.

Fig. 28: Lift the soft top out of the hinges
Fig. 29: Soft top lifted To reattach the soft top: 1. Hook the soft top into the hinges on both sides
of the box. 2. Re-attach the gas strut. 3. Push the cotter-pin into its guide as far as it
will go. Make sure that the safety button on the cotter-pin pops out and locks the cotter-pin securely.

Fig. 27: Cotter-pin with safety button 3. Unhook the gas strut.

Fig. 30: Inserted cotter-pin

39 TRIKE HYBRID
4. Close the soft top Chapter 7.9.2 “Closing the soft top” on page 37.

The hooks on the two rails must engage with the corresponding eyelets in the box.

7.9.4 Installing the child seat in the box
WARNING
Risk of injury if the child seat is not correctly installed.
If the child seat is not correctly installed in the box or properly locked, children can be injured during trans- port.
Only use the child seat when it is properly installed and correctly locked.
Do not use the child seat if it does not lock cor- rectly. In this case, contact your specialist bicycle dealer.
NOTICE
The child seat has recessed grips on the front and back.
1. Pull the latches on the side rails forward to open the latches.

Fig. 32: Eyelets for child seat in box
3. Press down the front part of the child seat with a little pressure so that it audibly engages 2x on both sides.

2x Click

2x Click

Fig. 31: Bolt on rail pulled forward, lock opened
2. Insert the child seat at first in to the back of the box

Fig. 33: Press child seat into locking position
NOTICE
The child seat has two locking stages at the front. The first engagement only indicates the first, lighter locking stage. The child seat is not fully locked in the box until it has engaged 2x on both sides at the front.

7.9.5 Use child seat
1. Place the child in the middle seat (when using as a single-seater) or in one of the outer seats (when using as a two-seater).

TRIKE HYBRID 40
4. Check the proper fit of the shoulder straps. If necessary, adjust the shoulder strap to the right length for your child.
NOTICE Depending on the size of the child to be strapped in, the belt position can also be changed. Contact a CUBE dealer to change the belt position.
5. To open the belt system, proceed as follows: Press the two release buttons at the top and bottom of the buckle simultaneously.

Fig. 34: Left: single-seater – right: two-seater

If you are using the child seat as a singleseater, pull the two outer free belts as tight as possible. Loose hanging belts can pose a safety risk to the child (risk of strangulation!).
2. Guide the shoulder straps of the harness system over the child’s shoulders. The harness buckle is located between the child’s legs.
3. To close the belt system, insert the two belt tongues together into the belt buckle. The belt tongues audibly engages in the belt buckle.

Fig. 36: Open belt system

Fig. 35: Insert both belt tongues into the belt buckle

41 TRIKE HYBRID
7.9.6 Removing the child seat from the box
1. Pull the latches on the side rails forward to open the locking mechanism.

7.9.7 Cleaning the child seat
1. If necessary, clean the child seat with warm water and a neutral cleaning agent.
2. Let the child seat air dry completely afterwards.

7.10 Using the front carrier
7.10.1 Retrofitting the front carrier
1. Ask your specialist bicycle dealer about suitable front carriers that you can use with your Trike Hybrid.
2. Have your specialist bicycle dealer fit the desired suitable front carrier to your Trike Hybrid.

Fig. 37: Latches pulled forward (open) 2. Lift the front part of the child seat.
Fig. 38: Lift child seat at the front 3. Unhook the rails of the child seat at the rear and
remove the child seat from the box.

7.10.2 Loading the front carrier
NOTICE
The luggage carrier may be loaded with a maximum of 20 kg, provided that you comply with the permitted total weight for your Trike Hybrid (even with the additional load).
Therefore, when loading the rear carrier, observe the information on the permissible total weight of your Trike Hybrid and the maximum payload (see Chapter 3.3 “Per- missible total weight (Trike Hybrid)” on page 14 Chapter 3.4 “Trike Family HybridMaximum payload” on page 15).
1. Place your luggage in the middle of your carrier.
2. Secure your luggage with a spring clamp or with a specially designed tensioning belt.
3. Shake your Trike Hybrid after loading.
The luggage (or parts of it) must not:
become loose. obstruct your freedom of movement when
cycling. touch the wheels. Do not obscure your lighting and reflectors.

Fig. 39: Lift out child seat

8 Malfunctions while cycling
DANGER
Danger in case of unprofessional maintenance!
If you perform maintenance work for which you are not author- ised, this can lead to dangerous cycling situations, falls, accidents and material damage.
– Have abnormalities not listed in the following table checked immediately by your specialist dealer and, if necessary, recti- fied.
– If the listed measures do not remedy the problem, consult your bicycle dealer immediately.

TRIKE HYBRID 42

43 TRIKE HYBRID

8.1 Trike Hybrid (general cycling behaviour)

Fault description
Unsafe or unstable cycling behaviour

Cause Box is not securely fixed/screws on the box have loosened
Load is unevenly distributed/ not placed centrally in the box
Load is insufficiently secured (e.g. against slipping)
Screw connections have loosened

Remedy
Contact your specialist bicycle dealer immediately for remedy.
Make sure that the weight is evenly distributed when loading.
Use tensioning straps or lug- gage nets to secure loose objects.
Contact your specialist bicycle dealer immediately for remedy.

8.2 Electric drive
NOTICE
Observe the separate original instructions for the electric drive: In them, you will find all detailed infor- mation of the component manufac- turer.

8.3 Shifting, manual drive (chain)

Fault description

Cause

Unusual noises such as cracking, loud grinding and/or knocking

Drive/shifting components damaged

Irregular resistance during pedalling

Drive/shifting components damaged

TRIKE HYBRID 44
Remedy Contact your specialist bicycle dealer immediately for remedy.
Contact your specialist bicycle dealer immediately for remedy.

8.4 Brakes
Fault description Brakes do not work

Cause Brake not mounted correctly

Brake damaged

Decreasing braking effect, brake lever can be pulled too far

Brake pads worn
Hydraulic lines/brake system leaking

Remedy
Contact your specialist bicycle dealer immediately for remedy.
Contact your specialist bicycle dealer immediately for remedy.
Have brake pads replaced immedi- ately by your specialist bicycle dealer.
Contact your specialist bicycle dealer immediately for remedy.

8.5 Frame, seat post and suspension fork

Fault description Noises: Creaking, banging, grinding or similar sounds. Seat post slips into the frame or twists
Poor suspension performance

Cause

Remedy

Frame and/or suspension dam- aged

Contact your specialist bicycle dealer immediately for remedy.

Tightening torque too low

Check and correct the tightening torque (see chapter Chapter 3.5 “Screw connections” on page 17).

Incorrect installation

Fix the fastener/clamp (see chapter Chapter 7.3 “Adjusting the seat height” on page 31).

Seat post has too small a diameter Install a seat post with the correct diam- eter.

Suspension fork/preload not cor- rectly adjusted

Adjustment and tuning according to the enclosed component operating instructions for the suspension fork (see chapter Chapter 7.4 “Adjusting the suspension fork” on page 32).

45 TRIKE HYBRID

Fault description Poor suspension performance

Cause Suspension fork damaged

Remedy
Contact your specialist bicycle dealer immediately for remedy.

8.6 Mudguards, lighting

Fault description

Cause

Remedy

Noises: Creaking, banging, grinding or similar sounds.

Mudguards or rear carrier have come loose

If the parts cannot be reattached, con- tact your bicycle dealer immediately for remedy.

Lighting partially or completely Light LEDs have reached the

without function

end of their service life.

Contact your specialist bicycle dealer immediately for remedy.

Cables damaged

Contact your specialist bicycle dealer immediately for remedy.

8.7 Wheels and tyres

Fault description

Cause

Remedy

Wheels “bounce”

Tyre damage

Contact your specialist bicycle dealer immediately for remedy.

Spoke broken

Contact your specialist bicycle dealer immediately for remedy.

Noises: Creaking, banging, grinding or similar sounds.

Foreign object is caught in the wheel

Remove the foreign body.
Use your Trike Hybrid with special care afterwards. Have your Trike Hybrid checked by your bicycle dealer for any consequential damage.

Damage to the wheel

Contact your specialist bicycle dealer immediately for remedy.

Spongy handling

Excessively low air pressure

Increase air pressure (= inflate tyres)
If the same cycling behaviour occurs again soon afterwards, there is a slow puncture (see next line).

Increasingly spongy handling, very unusual rolling behaviour (you feel every little stone)

Flat tyre

Replacement of tyre/inner tube.
Contact your bicycle dealer immedi- ately for remedy and do not use your Trike Hybrid until then.
You must not replace the inner tube, tyre and rim tape for the Trike Hybrid yourself.

TRIKE HYBRID 46

9 After a fall or accident
DANGER
Danger from unrectified damage!
Damage after a fall or accident can lead to dangerous cycling sit- uations, falls, accidents and mate- rial damage.
– Contact your bicycle dealer immediately after a fall or acci- dent.
– Only continue to ride your Trike Hybrid when it has been prop- erly repaired by your bicycle dealer.
DANGER
Danger from prohibited spare parts!
Prohibited spare parts may not meet the special requirements of your Trike Hybrid and may fail. These can lead to dangerous cycling situations, falls, accidents and material damage.
– Only use original spare parts.
After a fall, you must always replace the opened com- ponents listed below if hit during the impact:
Handlebars, Handlebar ends, Handlebar stem, Crank. All other components or parts must be checked and replaced if necessary by your specialist bicycle dealer.
10 Cleaning and main- taining the Trike Hybrid
Good care increases the life of your Trike Hybrid and its components. Therefore clean and maintain your Trike Hybrid regularly.

NOTICE
Before cleaning, remove the bat- tery or batteries from your Trike Hybrid.
Observe the original instructions for the electric drive for cleaning and care of the components of the elec- tric drive.
CAUTION
Danger due to incorrect care or incorrect cleaning agents!
Cleaning agents, lubricants and preservatives are chemical prod- ucts.
Incorrect use can damage your Trike Hybrid.
– Use a gentle stream of water or a bucket of water and a sponge for wet cleaning. Use only clean fresh or desali- nated water. Salt water contrib- utes to corrosion.
– Only use products that are expressly suitable for bicycles.
– Make sure that this agent does not attack paint, rubber, plastic, metal parts, etc. For more information, consult your specialist bicycle dealer.
– Follow the respective manufac- turer’s instructions in the com- ponent manuals.
1. Remove coarse dirt such as earth, stones, sand, etc. with a gentle stream of water.
2. Let your Trike Hybrid dry out a little.
3. Spray your entire Trike Hybrid with a suitable cleaning agent.
For many cleaning agents and light soiling, simply spraying on and rinsing off after the pre- scribed soaking time is sufficient.
Stubborn dirt can be removed after the soaking time, e.g. with a radiator brush before rinsing.
4. Rinse the entire Trike Hybrid with a gentle stream of water and let it dry.

47 TRIKE HYBRID
5. Clean the chain as described below.
Drip a suitable chain cleaning agent into a clean, lint-free cotton cloth and wipe the chain with it. Slowly operate the crank in the opposite direction to the drive direction.
Repeat this process with a clean area of the cotton cloth until the chain is clean.
Let the cleaning agent evaporate for about 1 hour.
If there is still cleaning agent between the chain links, the new lubricant is immediately decom- posed and is therefore ineffective.
Apply a lubricant suitable for bicycle chains sparingly to the chain links.
Remove excess lubricant on the chain with a clean, dry and lint-free cotton cloth.
6. Clean remaining heavily soiled areas by hand with a clean, lint-free cotton cloth using a suit- able cleaning agent.
NOTICE
Clean and lubricate your chain as described after every ride in the wet, every longer ride on sandy ground, at the latest every 200 km.
7. Spray the entire Trike Hybrid with suitable spray wax or a similar protective agent.
Exceptions:
Brake blocks or brake pads, Brake discs, Grips, brake/shift lever, Saddle, Tyres.
8. Polish your Trike Hybrid after the prescribed exposure time with a clean, lint-free cotton cloth.
9. Clean brake pads and brake discs by hand with a clean, dry, lint-free cotton cloth using a suitable degreasing agent.

11 Transporting the Trike Hybrid
NOTICE
The Trike Hybrid must never be dis- mantled for transport! Also the box must not be modified or removed! An exception is the removal of the soft top, this can be removed for transport. Chapter 7.9.3 “Removing/attaching the soft top” on page 38 You may only transport the Trike Hybrid in one piece (including the box)!
1. Before transport, remove the battery or batteries from your Trike Hybrid.
NOTICE
Batteries must be transported separately. Observe the information in the original instructions for the electric drive.
2. If necessary, remove other optional attachments that could be damaged during transport of your Trike Hybrid (e.g. smartphone cradle).
3. Transport your Trike Hybrid upright and secure it against falling over or slipping.
12 Decommissioning the Trike Hybrid for a longer period
CAUTION
Danger in case of incorrect storage! Incorrect storage can damage bear- ings and tyres and promote corro- sion.
– Please observe the following instructions.

TRIKE HYBRID 48

NOTICE
Remove the battery or batteries from your Trike Hybrid if you are going to park it for a long time.
Observe the information about storage in the original instructions for the electric drive.
Clean and maintain your Trike Hybrid regularly as described in chapter Chapter 10 “Cleaning and maintaining the Trike Hybrid” on page 46.
Store your Trike Hybrid only in dry and dust-free rooms.
Protect your Trike Hybrid against access by unau- thorised persons or children.
Check the brakes when you put your Trike Hybrid back into operation. In case of longer periods of non-use, the disc brakes may have to be run in again. In case of doubt, consult your specialist bicycle dealer.
13 End-of-life disposal
NOTICE
The integrated electric motor turns your Trike Hybrid into an electrical appliance that must be disposed of in accordance with national regula- tions.
Electrical and electronic devices as well as batteries and accumulators must not be disposed of with household waste.
As a consumer, you are legally obliged to return electrical and elec- tronic equipment as well as batteries and accumulators at the end of their service life to the public collection points set up for this purpose or to specialist dealers.

NOTICE
Remove the battery or batteries from your Trike Hybrid before dis- posing of it.
Batteries must be disposed of sepa- rately!
Observe the original instructions for the electric drive for the disposal of the components of the electric drive.
14 Guarantee/warranty
14.1 Warranty
As a rule, we grant a 2-year warranty on all Cube frames and rigid forks from the date of sale as required by law.
Your contact for warranty claims is the dealer from whom you purchased our product.
14.2 Warranty services
In addition, we offer extended warranties some of our CUBE frames and rigid forks beyond the statutory war- ranty period as follows:
For some alloy frames and rigid forks, we grant 6 years warranty from date of sale.
Should a break occur within this period (from the date of sale), we undertake to replace this article with an identical or similar article.
We reserve the right to repair defective frames or parts, or replace them with the corresponding suc- cessor model.
If a frame of the same type is no longer available for a pending exchange of a frame, we reserve the right to supply a replacement frame, which may differ in shape and colour from the original frame.
There shall be no entitlement to delivery of goods of the same type.
Conversion work outside the statutory warranty period (2 years) will not be carried out free of charge or reim- bursed by us.
14.3 Warranty conditions
The services exclusively relate to the frame and rigid fork and not to the paintwork and decor.

49 TRIKE HYBRID

Costs for necessary add-on parts due to frame changes (e.g. front derailleur, headset, rear shock, etc.) are not included in the warranty and are to be borne by the customer.
14.4 The claim to warranty/ guar- antee is invalidated
No claim may be made under warranty/guarantee in the following cases:
In case of changes to the Trike Hybrid without prior consent of the manufacturer.
In case of a retrofit of electric drives of any kind (e.g. front hub motor, rear hub motor, centre motor, etc.)
In case of defects and damage:
­ Due to add-on parts (such as bags, locks, rack systems, etc.),
­ which are attributable to the fact that they have not complied with the specifications in these original instructions.
­ which are due to force majeure, accidents, improper use, repairs not carried out profes- sionally, lack of maintenance / care or wear and tear.
­ which are due to improper use (see chapter Chapter 2.1 “Using your Trike Hybrid as intended” on page 8).
­ which are due to the fact that you have not used original specified parts or spare parts approved by CUBE when replacing compo- nents/parts.

Type of inspec- tion/ service work

Intervals: During normal use

During frequent use with maximum load/payload/heavy weights

(Regular) followup inspections

Every 2000 km or 1x per year

Every 500 km or every 2 months

Check of spoke tension

Every 500 km or 1x per year

Every 250 km or every 2 months

Check of the brake pads

Every 400 km

Every 100 km

Check of brake discs

Every 400 km

Every 100 km

Check of chain wear

Every 500 km

Every 250 km

Exchange of han- dlebars and han- dlebar stem

After an accident/fall (see Chapter 9 “After a fall or acci- dent” on page 46)

After an accident/fall (see Chapter 9 “After a fall or accident” on page 46)

16 Handover checklist

15 Inspections/service plan
NOTICE
Have your specialist bicycle dealer regularly inspect your Trike Hybrid and carry out the necessary service work at the intervals specified here.

Type of inspec- tion/ service work

Intervals: During normal use

First inspection

After 200 km or 2 months at the latest

During frequent use with maximum load/payload/heavy weights
After 100 km or 1 month at the latest

Brake inspection: Brake line routing Brake line check Brake pad adjustment
Visual leak test of the brake system. Check of all fastening screws of the brake system. Test of function and correct operation of front and rear brake. Shifting inspection: Shift cable routing Shift lever or grip shift set-up End stop set-up Cable tension adjustment Shifting function and smooth operation Check of all fastening screws of the shifting system. Chassis inspection: Basic function and leak check of the front fork. Adjustment / smoothness of the headset bearing
Check of all chassis screw connections
Please check off items after inspection
Comments

MTB/ RENNRAD/ TREKKING
Wheel inspection: Concentricity and centring of the rims, concentricity and centring of the tyres.
Check of spoke tension and air/tyre pressure.
Correct installation and fixed position of the wheels. Other inspections: Adjustment and correct tightening of the handlebars, handlebar stem and of the crank arms.
Adjustment and correct tightening of the saddle seatpost, correct tightening of the handles.
Correct installation of the assembly rivet of the chain.
Functioning of lights (if applicable).
Adjustment and correct thightening of the carrier, mudguards and kickstand (if applicable). Assembly and correct thightening of other attachment parts. When handing over the bicycle: The purchased object was handed over in a complete and perfect condition including the operating manual.
Verbal instructions were given on the safe use of the bicycle, particularly guidelines on running in the disc brake – if applicable.
Reference was made to the respective instructions in the operating manual which are to be observed.
Reference was made to the warranty obligations in the CUBE operating manual.

Place, date

Retailer signature

Purchaser signature (legal guardian for children under 18 years of age)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>