CUBE HUSK 18 Anleitung Acid Multi Tool User Guide

June 10, 2024
CUBE

CUBE HUSK 18 Anleitung Acid Multi Tool User Guide

Thermador HPIN42WS 42 Inch Box Island Hood.jpg

READ AND KEEP THE MANUAL
This and other accompanying instructions contain important information on the assembly, initial operation, and maintenance of the product.

Read all enclosed instructions carefully before assembling or using the product, especially the general safety instructions. Non-observance of this manual may result in serious injury or damage to the product itself and your vehicle. No liability is accepted in the event of unsuitable or improper use. Keep the enclosed instructions close to hand for further use. If you pass on the product or the vehicle equipped with the product to a third party, always include all accompanying instructions.

We at CUBE strongly recommend that you have this product assembled by your dealer.
The enclosed instructions are subject to European legislation. If the product or vehicle is delivered outside Europe, the manufacturer/importer may have to provide additional instructions.

EXPLANATION OF SYMBOLS
The following symbols and signal words are used in the enclosed instructions, on the product or on the packaging.

WARNING!
A medium risk of hazard which may result in death or serious injury if not avoided.

CAUTION!
A low risk of hazard which may result in moderate or minor injury if not avoided.

NOTICE!
**** Warning of possible damage to property.
Useful additional information for assembly or operation.

Read and observe the enclosed instructions.

SAFETY INSTRUCTIONS FOR ACCESSORIES

WARNING!
Risk of accident and injury!
Read all safety notes and instructions. Failure to observe the safety instructions and instructions can cause accidents, serious injury and damage.

Safety of children
If children play with the packaging or small parts, they may swallow them and suffocate or injure themselves.

  • Keep small parts away from children.
  • Do not let children play with the packaging or product.
  • Do not leave the product or vehicle unattended during assembly.

Safety instructions for assembly

  • Before assembly, check all components of the product and the vehicle for damage, sharp edges or burrs.
  • If the scope of delivery for the product is not complete or if you notice any damage, sharp edges or burrs on the product, components or vehicle, do not use it.
  • Use only parts and accessories intended for the product. Components from other manufacturers may affect optimal function.

Safety Instructions for Operation
Please note that accessories can have a significant influence on the characteristics of the vehicle.

  • This product is designed as a tool for bicycles and is not designed for other work. The tire fork has a sharp tip, be careful when using.
  • If you are not absolutely sure or if you have questions, please contact your dealer.

Safety instructions for maintenance
Prevent malfunctions due to excessive wear, material fatigue or loose screw connections:

  • Check the product and your vehicle regularly.
  • Do not use the product and your vehicle if you notice excessive wear or loose screw connections.
  • Do not use the vehicle if you notice cracks, deformation or color changes.
  • Have the vehicle inspected immediately by your dealer if you notice excessive wear, loose screw connections, deformation, cracks or color changes.

CLEANING AND CARE

NOTICE!
Risk of damage!
Improper handling of cleaning agents can cause damage to the product.

» Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can damage the surfaces and the product.

Clean the product regularly with water (add a mild detergent if necessary) and a soft cloth.

STORAGE

All parts must be completely dry before storage.

  • Always store the product in a dry place.
  • Protect the product from direct sunlight.

DISPOSAL

Dispose of the packaging according to its type. Add cardboard and cartons to your waste paper collection, and films and plastic parts to your recyclables collection.

Dispose of the product in accordance with the laws and regulations valid in your country.

LIABILITY FOR MATERIAL DEFECTS

If there are any defects, please contact the dealer from whom you purchased the product.

In order to ensure that your complaint is processed smoothly, it is necessary for you to present proof of purchase and proof of inspection.

Please keep them in a safe place.

To ensure a long service life and durability of your product or your vehicle, you may only use it in accordance with its intended purpose. It is essential that you observe the information in the operating instructions of your vehicle.

Furthermore, the installation instructions (especially torques for screws) and the prescribed maintenance intervals must be observed.

OTHER INFORMATION

**** Please visit us occasionally on our website at www.CUBE.eu. There you will find news, information and the latest versions of our manuals as well as the addresses of our specialist dealers.

Pending System GmbH & Co. KG
Ludwig-Hüttner-Str. 5-7
D-95679 Waldershof
+49 (0)9231 97 007 80
www.cube.eu

Scope of delivery

FIG 2 Scope of delivery.JPG

FIG 1.JPG

INSTALLATION INSTRUCTIONS for ACID
Multi Tool HUSK 18 / MANUAL for ACID
Multi tool HUSK 18

PENDING SYSTEM GMBH & CO. KG
Ludwig-Hüttner-Str. 5-7 | D-95679 Waldershof

MANUAL Tubeless tire repair kit

FIG 4 MANUAL Tubeless tire repair kit.JPG

FIG 5 MANUAL Tubeless tire repair kit.JPG

MANUAL Chain tool

FIG 6 MANUAL Chain tool.JPG

FIG 7 MANUAL Chain tool.JPG

More extensive information and the latest manual you will find at the following website address:

FIG 8 QR CODE.JPG

www.cube.eu/service /manual

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals