CUBE 94799 Phone Mount HPA User Manual

CUBE 94799 Phone Mount HPA

Product Information

The user manual contains important information related to the assembly, initial operation, and maintenance of the product. It is recommended to read and keep the manual for future reference. The manual also includes safety instructions and symbols that should be carefully observed to avoid accidents, serious injury, and damage.

Explanation of Symbols
The following symbols and signal words are used in the enclosed instructions, on the product or on the packaging:

• WARNING! – A medium risk of hazard which may result in death or serious injury if not avoided.
• CAUTION! – A low risk of hazard which may result in moderate or minor injury if not avoided.
• NOTICE! – Warning of possible damage to property.

Safety Instructions

It is important to observe all safety instructions and warnings provided in the manual to avoid accidents, serious injury, and damage to the product or vehicle. Safety instructions are provided for accessories, assembly, operation, and maintenance.

Assembly

It is recommended to have the product assembled by a dealer. Non-observance of the manual may result in serious injury or damage to the product itself and your vehicle. Keep the enclosed instructions close to hand for further use. If you pass on the product or the vehicle equipped with the product to a third party, always include all accompanying instructions.

Operation

Please note that accessories can have a significant influence on the characteristics of the vehicle. It is important to observe safety instructions for accessories, assembly, and maintenance to prevent malfunctions due to excessive wear, material fatigue or loose screw connections.

Maintenance

Prevent malfunctions due to excessive wear, material fatigue or loose screw connections. In case of a complaint, it is necessary to present the purchase receipt and inspection reports.

Product Usage Instructions

Use a torque wrench and drill a hole at the marked position using the drill diameter indicated in the symbol. Observe the indication sound. Clean and store the product properly after use. Dispose of the packaging and parts according to the instructions provided. If you have any questions or concerns related to product usage, please contact Pending System GmbH & Co. KG at +49 (0)9231 97 007 80 or visit their website at www.cube.eu.

GENERAL

READ AND KEEP THE MANUAL
This and other accompanying instructions contain important information on the assembly, initial operation, and maintenance of the product.
Read all enclosed instructions carefully before assembling or using the product, especially the general safety instructions. Non-observance of this manual may result in serious injury or damage to the product itself and your vehicle. Keep the enclosed instructions close to hand for further use. If you pass on the product or the vehicle equipped with the product to a third party, always include all accompanying instructions. We at CUBE strongly recommend that you have this product assembled by your dealer. The enclosed instructions are subject to European legislation. If the produ ct or vehicle is delivered outside Europe, the manufacturer/importer may have to provide additional instructions.

EXPLANATION OF SYMBOLS
The following symbols and signal words are used in the enclosed instructions, on the product or on the packaging.

WARNING!
A medium risk of hazard which may result in death or serious injury if not avoided.

CAUTION!
A low risk of hazard which may result in moderate or minor injury if not avoided.

NOTICE!
Warning of possible damage to property

SAFETY INSTRUCTIONS FOR ACCESSORIES

WARNING!
Risk of accident and injury!
Read all safety notes and instructions. Failure to observe the safety instructions and instructions can cause accidents, serious injury and damage.

Safety of children
If children play with the packaging or small parts, they may swallow them and suffocate or injure themselves.

• Keep small parts away from children.
• Do not let children play with the packaging or product.
• Do not leave the product or vehicle unattended during assembly

Safety instructions for assembly

• Before assembly, check the scope of delivery of the product for completeness.
• Before assembly, check all components of the product and the vehicle for damage, sharp edges or burrs.
• If the scope of delivery for the product is not complete or if you notice any damage, sharp edges or burrs on the product, components or vehicle, do not use it.
• Have the product and the vehicle checked by your dealer.
• Use only parts and accessories intended for the product. Components from other manufacturers may affect optimal function.
• If you intend to combine this product with vehicles of other manufacturers, be sure to check their specifications and check dimensional accuracy and compatibility according to the instructions in the enclosed manuals and the owner‘s manual of your vehicle.
• Screw connections must be tightened correctly with a torque wrench and with correct torque values.
•  If you are not experienced in using a torque wrench or do not have a suitable torque wrench, have loose screw connections checked by your dealer.
• Note special torques for components made of aluminum or carbon fiber reinforced polymer. Please also read and follow the operating instructions of your vehicle.

Safety Instructions for Operation
Please note that accessories can have a significant influence on the characteristics of the vehicle.

• If you are not absolutely sure or if you have questions, please contact your dealer.
• The enclosed instructions cannot cover every possible combination of the product with all vehicle models.

Safety instructions for maintenance
Prevent malfunctions due to excessive wear, material fatigue or loose screw connections:

• Check the product and your vehicle regularly.
• Do not use the product and your vehicle if you notice excessive wear or loose screw connections.
• Do not use the vehicle if you notice cracks, deformation or color changes.
• Have the vehicle inspected immediately by your dealer if you notice excessive wear, loose screw connections, deformation, cracks or color changes.

CLEANING AND CARE

NOTICE!
Risk of damage!
Improper handling of cleaning agents can cause damage to the product.

• Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can damage the surfaces and the product.

Clean the product regularly with water (add a mild detergent if necessary) and a soft cloth.

STORAGE

All parts must be completely dry before storage.

• Always store the product in a dry place.
• Protect the product from direct sunlight.

DISPOSAL

Dispose of the packaging according to its type. Add cardboard and cartons to your waste paper collection, and films and plastic parts to your recyclables collection. Dispose of the product in accordance with the laws and regulations valid in your country.

LIABILITY FOR MATERIAL DEFECTS
If there are any defects, please contact the dealer from whom you purchased the product. In order to ensure that your complaint is processed smoothly, it is necessary for you to present proof of purchase and proof of inspection. Please keep them in a safe place. To ensure a long service life and durability of your product or your vehicle, you may only use it in accordance with its intended purpose. It is essential that you observe the information in the operating instructions of your vehicle. Furthermore, the installation instructions (especially torques for screws) and the prescribed maintenance intervals must be observed.

OTHER INFORMATION
Please visit us occasionally on our website at www.CUBE.eu. There you will find news, information and the latest versions of our manuals as well as the addresses of our specialist dealers.
Pending System GmbH & Co. KG
Ludwig-Hüttner-Str. 5-7
D-95679 Waldershof
+49 (0)9231 97 007 80
www.cube.eu

INTENDED USE

This product is designed to hold a cell phone and is compatible with handlebars that have a diameter of 31.8 mm or 35 mm. The product is not designed to be used with other handlebars. We at CUBE strongly recommend that you have this product assembled by your dealer.

Specifications

• Handyhalterung HPA
• Lenker
• Aluminium
• 172g
• 112 x 85 x 81 mm
• Handy

Equipment delivered

**MANUAL ACID Phone Mount HPA

**

• Please note that the phone mount does not perform the protective function of a protective case. Only use the phone mount with a suitable protective case.
• The range of use of the bike always changes to use category 2 (asphalt road, bike paths, forest roads and dirt roads) when using the cell phone holder.
• Check the secure hold of the phone mount before every use.
• No liability is accepted in the event of unsuitable or improper use.
• Make sure that your mobile phone is securely fixed in the mount.

More extensive information and the latest manual you will find at the following website address:

www.cube.eu/service/manuals/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>