ventair THINHDSS Thin Dry Wall Hand Dryer Instruction Manual
- June 16, 2024
- ventair
Table of Contents
INSTALLATION INSTRUCTIONS Thin Dry Wall Hand Dryer
Thin Dry Hand Dryer
THINHDWH – White
THINHDBL – Black
THINHDSS – Brushed
TECHNICAL SPECIFICATIONS
Supply: 220 – 240V AC
Total Power: 1000 W
Air Speed: 100 m/s
Dry Time: 10-12 sec
Housing: Stainless Steel 304
Auto Shut Off: 60 sec
Sound Level: 74 dB(A)
Safety: Class Ⅰ
IP Rating: IP23
IK Rating: IKO8
Dimensions (A x B x C): 174 x 256 x 102 mm
Net Weight: 2.5 kg
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
IMPORTANT
This product is suitable for use only with a supply voltage of 220-240V AC,
SOHz.
All electrical work must be carried out in accordance with local and national
electrical codes as applicable.
This Hand Dryer must be installed by a licensed Electrician.
Always switch power off prior to installation. A means of mains power
isolation must be installed in the circuit for the purpose of safe access for
any internal cleaning, recalibration, or maintenance.
This device is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Young children
should be supervised to ensure that they do not play with the appliance.
Any changes or modifications made or attempted to this product, without the
prior written approval of the manufacturer, will void any and all stated
warranties.
BEFORE INSTALLATION
See mounting template for complete reference to mounting heights and power knockout locations. It is recommended to avoid installation of dryer near high reflective objects (mirror, stainless steel washbasins, etc.) in order to avoid errant function of the presence sensor.
INSTALLATION
Be sure to break the electric supply before any operation Using the mounting
template supplied, mark mounting hole locations for correct height 0above the
floor and drill 4x mounting holes. Remove transport screw at the rear of the
dryer.
Unscrew front cover from the base of the unit 0using the hex key provided. Fix
base to the wall.
Connect supply and ground wires to terminal
block where indicated.
Before replacing cover, there is a customized
option to run the dryer heater on (1000 W) or heater off (600 W).The switch is
0clearly marked.
Adjustable detection distance.
Default setting is 120-150mm from nozzle.
Re-attach the cover to the
base of the unit using the hex key provided. Reconnect power supply and test
operation.
MAINTENANCE
Periodic cleaning of this unit is required to maintain optimum performance and
reduce unnecessary wear on parts. Depending on usage, a regular maintenance
programme with a frequency between 3-6 months is highly recommended.
Detach the cover from the dryer and remove any dust or lint. Remove and
discard the existing filter (the HEPA filter cannot be cleaned and reused).
Replace with a new HEPA filter and reassemble after cleaning.
Wipe the cover with a damp cloth and mild cleaning solution. Do not soak.
Never use abrasives to clean the cover.
WARRANTY
This product is guaranteed by Ventair for 5 years (2 years for commercial
installations) from the date of purchase against faulty materialsor
workmanship which affects its design ability to switch and operate.
During this period if the product has a defect of this nature it will be
repaired or replaced free of charge by Ventair with the same itemn,or a
similar one of higher specifications, ON THE CONDITIONS THAT:
The buyer returns it to the seller from whom it was bought, freight paid.
The product has been bought by the user, i.e. a receipt/sales invoice is
produced as a proof of purchase.
The product has not been misused or handled carelessly, installed in anyway
contrary to the installation instruction, or installed in any unusually
exposed or harsh environmental conditions.
This guarantee excludes liability for any discolouration or delamination of
paint or plastic, or any user replacement parts. It does not confer any rights
other than those expressly set out above and does not cover any claims for
consequential loss or damage.
Our Goods come with guarantees that cannot be excluded under the Australian
and New Zealand Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the Goods repaired or replaced if the
Goods fail to be of acceptable quality and the failure does not amount to a
major failure.
INSTALLATION TEMPLATE
This template is NOT to scale, please use the template that has been provided
to you 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>