V-TAC 80133970 Underground Fitting Installation Guide
- June 4, 2024
- V TAC
Table of Contents
V-TAC 80133970 Underground Fitting Installation Guide
TECHNICAL DATA
- MODEL: VT-7677
- MATERIAL: Stainless Steel
- HOLDER: GU10 (Bulb Not Included)
- DIMENSION: 110X110X120mm
- MAX RATED: LOAD 35W
- SURFACE TEMPERATURE: 25° (for LED Bulb)
- INPUT POWER : AC 220-240V, 50Hz
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Terminal block not included.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock
INSTALLATION DIAGRAM
-
BOX NOT INCLUDED
-
L = BROWN
N = BLUE
= YELLOW-GREEN -
BOX NOT INCLUDED
INSTALLATION INSTRUCTION
- Open the lamp and install the bulb in the lamp
- Connect the supply leads with terminal (The box not included).
- Fix the lamp body on the ground.
- Switch on and test.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
