VEVOR JY-BS Utility Service Cart User Manual

: June 15, 2024
: VEVOR

Table of Contents

JY-BS Utility Service Cart
UTILITY CARTS
SAFETY INSTRUCTION AND PRECAUTIONS
TOOL REQUIRED FOR INSTALLATION
PARTS LIST
ASSEMBLY
Documents / Resources

Technical Support and E-Warranty Certificate www.vevor.com/support
UTILITY CARTS
USER MANUAL
MODEL: JY-BS

JY-BS Utility Service Cart

VEVOR JY-BS Utility Service Cart

We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

UTILITY CARTS

MODEL: JY-BS VEVOR JY-BS Utility Service Cart NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTION AND PRECAUTIONS

WARNING:
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL
Assembly precautions

Assemble only according to these instructions. Improper assembly can create hazards.
Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
Keep assembly area clean and well lit.
Keep bystanders out of the area during assembly.
Do not assemble when tired or when under the influence of alcohol, drugs or medication.
Weight capacity and other product capabilities apply to properly and completely assembled product only.
Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded utility carts.

Use precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

DO NOT SIT, STAND OR cLIMB ON THIS ITEM.
This product is not a toy. Do not allow children to play with or near this item.
Do not exceed weight capacities, evenly distributed from bottom up. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded utility carts.
Do not lift while loaded.
To prevent tipping, push/pull using supplied handle only.
Use as intended only.
Inspect before every use; do not use if parts are loose or damaged.

TOOL REQUIRED FOR INSTALLATION

Phillips Screwdriver and Rubber mallet
Note: The phillips screwdriver and rubber maller tools not included with this product

PARTS LIST

lndex No.	Desccription	Qty
1	Handle	1
2	Upper Platform	1
3	Lower Platform	1
4	left Leg	2
5	Right Leg	2
6	Brake Castor Assembly Φ5 in	2
7	Fixed Castor Assembly Φ5 in	2
8	Tapping Screw M6*25mm	12
9	Screw Bolt M8*35mm	16
10	Hex Nut M8	16
11	Wrench	1
12	Upper part clamping position	2

ASSEMBLY

Use the mallet to tap down the parts to ensure they are seated properly before fastening them with screws.

Upper board layer pin is stuck in the card slot(#1)
Turn upper platform upright (#2) and install handle (#1)
Turn upper platform assembly upside down, and install legs (two left and two right, #4and#5)
Install lower platform(#3) and castors(#6 #7)Tighten all screws and hex nuts. (#8, #9, #10)
Installation of Plastic Insert Plate

VEVOR JY-BS Utility Service Cart - fig 2

| Items| Description
---|---|---
1| Name| Utility carts
2| Model| JY-BS
3| Parameter| Load-bearing：550Ib，Number of plies：2，Pallet sizes(LxWxHxID)：810x450x100x80mm
4| Package Size| 840x485x145mm
5| G.W.| 18KG

Technical Support and E-Warranty Certificate
www.vevor.com/support
MADE IN CHINA