MOON-DE-AGE SL0301BLK Outdoor Solar Pendant Shed Light Instruction Manual
- June 15, 2024
- Moon-De-Age
Table of Contents
MOON-DE-AGE SL0301BLK Outdoor Solar Pendant Shed Light
FOR FIRST TIME USE
ASSEMBLEY STEPS
- Mounting the solar panel in the sun with the attached bracket.
- Hanging the pendant light as you desired, make sure the cable is long enough.
- Wire the electrical cable connector.
WARM TIPS
- Make sure the solar panel is exposed to sufficient sunlight for 8 hours to make the battery reach its maximum capacity.
- After the battery is fully charged, cover the solar panel with the paperboard to test whether the light is on.
SWITCH OPERATION INSTRUCTIONS
There are three switch modes on the back of the solar panel.
- [AUTO] Suitable for outdoor use. Built-in photocell sensor, the lighting fixture will automatically turn on at dusk and turn off at dawn. You can also control the light with remote control in this mode.
- [OFF] Turn off the light.
- [MANUAL]Suitable for indoor use. In this mode, the photocell sensor is turned off, and the lighting fixture only supports remote control.
REMOTE CONTROL INSTRUCTIONS
AUTO MODE: Automatically turns on at dusk and turns off at dawn.
OFF MODE: Turn off the light
TIMER MODES: Four lighting time optional
-
2H / 4H / 6H: 2/4/6 hours of lighting time and then turn off
CCT MODES: 3 Color Tones -
DEFAULT: 4000K natural white
-
PRESS ONCE: 6500K cool white
-
PRESS TWICE: 3000K warm white
TWO BRIGHTNESS LEVELS: 100%Full bright & 50%Half bright
NOTES:
The remote control uses 2 x AAA alkaline batteries.(may not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>