ANKER A91C0 525 Charging Station User Manual

ANKER A91C0 525 Charging Station

Product Information

Specifications

• USB-A 1 / USB-A 2: 5V 2.4A Total (2.4A max per port)
• USB-C 1 / USB-C 2: 5V 3A / 9V 3A / 15V 3A / 20V 3.35A (67W max per port)
• USB-C 1 + USB-C 2: 45W Max + 20W Max or 30W Max + 30W Max
• USB-C 1 / USB-C 2 + USB-A 1 / USB-A 2: 45W Max + 12W Max
• USB-A 1 + USB-A 2: 15W Max

Product Usage Instructions

Connecting Devices

1. Identify the USB-A and USB-C ports on the product.
2. For USB-A devices, insert the USB-A connector into the corresponding USB-A port.
3. For USB-C devices, insert the USB-C connector into the corresponding USB-C port.

Power Output Selection (USB-C Ports)
The USB-C ports support multiple power output options:

• For devices requiring up to 45W power, connect them to either USB-C 1 or USB-C 2 ports.
• For devices requiring up to 67W power, connect them to either USB-C 1 or USB-C 2 ports.
• For devices requiring higher power output, such as 20V 3.35A (67W), connect them to either USB-C 1 or USB-C 2 port.

Power Output Selection (USB-A Ports)
The USB-A ports have a maximum power output of 15W. Connect your USB-A devices to either USB-A 1 or USB-A 2 ports.

Charging Multiple Devices
To charge multiple devices simultaneously:

• For USB-C devices, connect them to the available USB-C ports.
• For USB-A devices, connect them to the available USB-A ports.

Power Limitations
Ensure that the total power consumption of connected devices does not exceed the maximum power output of the product. If the total power consumption exceeds the limit, charging may be slower or may not work at all.

Frequently Asked Questions (FAQ)

• Q: Can I charge a USB-C device using the USB-A ports?
• A: No, the USB-A ports are only intended for charging USB-A devices with a maximum power output of 15W.
• Q: Can I charge two USB-C devices simultaneously?
• A: Yes, you can charge two USB-C devices simultaneously by connecting them to USB-C 1 and USB-C 2 ports.
• Q: Can I charge a USB-A device and a USB-C device simultaneously?
• A: Yes, you can charge a USB-A device and a USB-C device simultaneously by connecting the USB-A device to either USB-A 1 or USB-A 2 port, and the USB-C device to either USB-C 1 or USB-C 2 port.
• Q: What happens if I exceed the maximum power output of the product?
• A: Exceeding the maximum power output may result in slower charging or the device not charging at all. Ensure that the total power consumption of connected devices does not exceed the specified limits.

OVERVIEW

Using Your Product

When this product is connected to the power outlet, the Power Light, Surge Protection Light, and Grounded Protection Light will all turn white.

Tip : The surge protection feature can be used to protect your computers. smartphones, and other electronic equipment against voltage fluctuations, surges, and spikes. If the Surge Protection Light is off, it indicates the surge protector is not functioning normally.

INSTRUCTIONS

1. Power Light: Automatically on when connected to a power outlet.
2. Breathes white twice and then turns solid white when a device is connected to a USB-C Port.

Specifications

Important Safety Instructions

• Do not connect this product to an ungrounded outlet.
• Do not use with extension cords.
• Do not exceed electrical ratings.
• Use in dry locations and indoors only.
• In case of broken plugs, the product must be disposed of.
• The disconnection from line voltage is made by an AC plug.
• Do not connect this product to other power strips.
• Do not cover this product when in use.
• If you want to clean the product, only use a dry cloth or brush.
• Install this product away from heat-emitting appliances such as radiators.
• Keep children away from this product.
• Do not place this product near naked flame sources, such as candles.
• The product is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The following importer is the responsible party:

Company Name : Fantasia Trading LLC
Address : 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone : 1-800-988-7973

IC Statement
This device complies with Industry Canada license – ICES-003. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Customer Service

Service client 24-Month Limited Warranty
Lifetime Technical Support
support@anker.com
(US/CA) +1 (800)988 7973

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com

Or scan the QR code below:

• INSTAGRAM:
  @anker_official
  @anker_jp

• FACEBOOK:
  @AnkerDeutschland
  @AnkerJapan
  @Anker

• TWITTER:
  @AnkerOfficial
  @Anker_JP

Product Number : A91C0
51005003517 V03

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>