aigostar 300100JDF Table Blender Instruction Manual
- June 4, 2024
- aigostar
Table of Contents
aigostar 300100JDF Table Blender
IMPORTANT SAFETY GUIDELINES
To avoid the risk of serious injury when using your table blender, please follow basic safety precautions. These include the following:
- READ ALL INSTRUCTIONS, SAFEGUARDS AND WARNINGS BEFORE OPERATING THE BLENDER.
- Misuse may lead to injury. Please handle this appliance with care.
- Always unplug the blender before leavingit unattended and before assembling, disassembling or cleaning.
- This blender must not be used by children. Keep it and its power cord out of
- This blender may be used by persons with reduced physical, sensory or mental capabilities or who lack experience or knowledge as long as they have been given supervision or instruction concerning its safe use and they understand the hazards involved.
- Children must not play with the blender.
- Be careful when handling the sharp cutting blades, emptying the jug, and cleaning the blender.
- Be careful when pouring hot liquid into the blender as a sudden cloud of hot steam may shoot out.
- Switch off the blender and unplug it before changing accessories or approaching parts that move when in use.
- This blender, is intended for use in households and similar applications, such as
- staff kitchen areas in shops, offices, and other working environments;
- farmhouses;
- by clients in hotels, motels, and other residential type environments;
- bed and breakfast type environments.
- This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- To avoid a hazard due to an accidental resetting of the thermal protection switch, do not attach this blender to an external Switching device, such as a timer, or connect it to a circuit that is regularly switched on and off by the power company.
- SAVE THESE INSTRUCTIONS. THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
- The failure to follo w any of these important safeguards and instructions for safe use represents a misuse of your blender that could void the warranty and potentially lead to serious injury.
- This blender is equipped with a motor thermal protection switch. If it overheats, the blender will switch off automatically. Unplug the blender and let it cool down to room temperature before plugging it in and switching it on again. Please contact Y.Our dealer or an authorized service centre 1f this happens a lot.
Specifications
- Model No. 300100JDF
- Power consumption 220-240V – 50/60Hz
- Power 750W
- Capacity 1500 ml
PARTS DIAGRAM
- Measuring cup
- Lid
- 1.5 litre glass jug
- Jug seal
- Blade assembly
- Control knob
BEFORE Fl RST USE
- Before using your blender for the first time, remove any packaging material and promotional labels.
- Be careful when handling the blades as they are extremely sharp.
- Wash the jug, lid, blade assembly, and attachments with a soft cloth in warm soapy water. Rinse and dry thoroughly. All parts (except the motor base) may also be washed in the dishwasher, but only on the top shelf.
OPERATION
- Place the measuring cup into the lid and turn it anticlockwise to lock. Insert the blade assembly into the jug and turn it anticlockwise. Then, place the food you wish to blend into the glass jug; do not exceed the MAX line.
- Put the lid on the jug and close securely. Correctly mount the jug assembly onto the motor base and turn clockwise to lock.
Note: The blender will not operate if the jug assembly is not installed correctly. Plug in the blender.
Switch on the blender by turning the control knob to one of the following settings: SPEED SETTING| USE
---|---
CHOP (1)| Low speed, to combine delicate foods using a folding motion. This is good for combining wet and dry ingredients.
LIQUIFY (2)| High speed, ideal for breaking down ingredients to make ice-based drinks and other finely blend-ed mixtures.
PULSE (P)| Short high-power burst. - Always move the knob to the ‘O’ position after using the blender. Remove the glass jug from the motor base by turning it anticlockwise. Pour out the processed food and unplug the blender.
TIPS: Blending jug
- Run the blender only for the amount of time required. Do not over-blend the ingredients.
- Use the PULSE setting when food is too thick or coarse to circulate in the jug.
- If any moisture or liquid appears on the top of the motor base during blending, immediately switch off the blender and unplug it. Remove the blender jug, and wipe the motor base with a dry cloth or paper towel.
- This blender can process a maximum of 8 ice cubes from a standard ice tray at one time.
- Thicker mixtures puree more easily if the jug is full.
- Do not insert metal utensils into the jug as they may damage the blades or blender jug.
- Do not blend heavy mixtures for more than 10 seconds at a time. For normal blending tasks, do not blend for more than 1 minute. If you do need to blend for longer, first turn off the blender and stir the ingredients before starting again. This rest will help protect the motor from wear and tear.
- The blender cannot knead dough or mash potatoes.
- Do not blend hot or boiling ingredients. Allow food to cool down to a warm temperature before placing it in the blender. This is to safeguard against sudden bursts of steam that could dislodge the lid.
- When blending warm ingredients, place a tea towel over the lid and hold it down firmly.
Overload protection system
The motor cannot run for more than 3 minutes. After a shutdown, it is
necessary to let the motor cool down to room temperature.
Following the MAX line will help to prevent over-loading. However, some dense
combinations of ingredients may still strain the motor. If the motor seems to
be straining or running slowly, either operate the blender for only 10 seconds
at a time or reduce the amount of ingredients. Adding more liquid can also
help loosen dense mixtures.
Blending chart
| Food | Preparation | Quantity | Functions (Speeds) | Time |
|---|
Smoothie
| Milk, fruit, yogurt, ice cream| ****
Max800 ml
| ****
Chop (speed1) Liquify (speed 2)
| ****
60 secs
Ice or frozen fruit| Frozen ingredients should not be larger than a cube from standard ice tray| Max 8 pieces| PULSE
Liquify (speed 2)
| ****
60 secs
Blended soups| Cool to room temp.| 800 ml| Chop (speed 1)| 50-60 secs
TroubleShooting
Motor doesn’ t start or blades don’ t rotate| Check that the plug is properly
inserted into the socket.
---|---
Food is lumpy or unevenly chopped
| This can happen when too much food is being blended at once. Try smaller amounts or work in batches if necessary.
The ingredients may be too large. Try to cut them into smaller pieces. For best results, ingredients should be in pieces no larger than 2 cm.
Food is chopped too fine or is watery| The mixture may be too thick. Try
adding more liquid and/or using a slower speed for blend ng.
Food sticks to the blades andjug| Unplug the appliance, remove the blades and
check whether the seal ring is in the correct position.
Blender stops suddenly while in use| We recommend blending in smaller batches
or cutting ingredients into smaller pieces.
CLEANING AND MAINTENANCE
Caution:
- The blades in the jug are very sharp. Use caution when cleaning them.
- Always unplug the blender before cleaning for safety reasons.
Jug, blades, and lid:
Avoid food residue drying on any part of the blender. Follow these steps as
soon as possible after use:
- Rinse most of the residue off the jug, blades, and lid.
- Hand-wash them in warm, soapy water using a mild liquid detergent and a non-abrasive sponge.
Motor base:
- To clean the motor base, wipe it with a soft, damp cloth and then dry thoroughly. Wipe any excess food particles from the power cord.
Cleaning agents:
- Do not use abrasive scouring pads or cleaners on either the motor base or any part of the blender as they may scratch the surface. Use only warm soapy water and a soft cloth.
Dishwasher:
- The jug, lid, and blade assembly may be washed in the dishwasher, but only on the top shelf.
Stubborn food stains and odours:
- Strong-smelling foods, such as cumin or coriander, and some vegetables, such as carrots or beetroot, may leave odours or stains.
- To remove, pour warm soapy water into the jug until the MAX line. Set aside to soak for 5 minutes. Then, pour out the water and wash the jug with a mild detergent and warm water. Rinse well and dry thoroughly. Store the jug with the lid off.
Storage:
Store your blender upright with the blender jug assembled on the motor base or
beside it. Do not place anything on top. To allow air to circulate, keep the
lid off.
DISPOSAL
You can help protect the environment!
Please remember to respect local regulations: Take non-working electrical
equipment to an appropriate waste disposal centre.
SAMSPARTY SL
CL CABAÑA 78, 45210 YUNCOS,TOLEDO,ESPAÑA
B45824786
https://www.aigostar.com
MADE IN P.R.C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>