TOWOND 120 Projector Screen and Stand Instruction Manual
- June 15, 2024
- TOWOND
Table of Contents
TOWOND 120 Projector Screen and Stand
List of Accessories
- PartA (Crossbar7, Connector6, 90°Connector*2)
- Part B (Crossbar8, Connector8)
- Triangle bracket*2
- Carrying case *1
- Sandbag*2
- Screen*1
- Windproof rope x6
- Ground Nails x6
Screen Installation Procedures
- As shown in Figure 1: Part A (crossbar7, connector6) Use the connectors to connect all the crossbars.
- As shown in Figure 1 and Figure 2:
- Thread the screen onto the crossbar, then use 90° connectors to connect the left and right sides.
- As shown in the figure:
- Loosen the top screw of the Triangle bracket as Figure 1.
- Unfold the Triangle bracket as Figure 2 and Figure 3.
- And then tighten the Triangle bracket top screw as Figure 4.
- The wrong way to open the triangle bracket as Figure 1, and Figure 2.
- As shown in Figure 1:
- Connect Part B(crossbar8, connector8) as two long crossbars.
- Pass the left and right vertical poles through the left and right sides of the screen.
- Connect Part A (90° connector) and Part B
- As shown in Figure 1:
- Connect the new long crossbar to the triangle bracket respectively
Overall installed effect
- Mail: Towond2020@126.com
- If you have any questions, please feel free to contact our after-sales department
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>