TOWOND 100 Inch Projector Screen with Stand Instruction Manual

TOWOND 100 Inch Projector Screen with Stand

List of Accessories

1. Part A（Crossbar6, Connector5, 90°Connector*2）
2. Part B（Crossbar8, Connector8）
3. Triangle bracket*2
4. Carrying case *1
5. Sandbag*2
6. Curtain*1
7. Windproof rope x6
8. Ground Nails x6

Curtain Installation Procedures

1. As shown in figure 1: Part A (crossbar6, connector5)
   • Use the connectors to connect all the crossbars.
2. As shown in Figure 1 and Figure 2: Thread the screen onto the crossbar, then use 90° connectors to connect the left and right side.
3. As shown in figure:
4. Loosen the top screw of the Triangle bracket as Figure 1.
5. Unfold the Triangle bracket as Figure 2 and Figure 3.
6. And then tighten the Triangle bracket top screw as Figure 4.
7. The wrong way to open the triangle bracket as Figure 1, Figure 2.
8. As shown in Figure 1:
9. Connect Part B(crossbar8, connector8) as two long crossbars.
10. Connect the new long crossbar to the triangle bracket respectively.
11. As shown in Figure 1:
12. Connect the left and right sides of the assembled Part A screen (90° connectors) to Part B respectively.
13. The velcro of the curtain can fix the left and right sides to complete the installation.

More Information

Scan the QR code below to watch the detailed installation video

Overall installed effect

Mail: Towond2020@126.com

If you have any questions, please feel free to contact our after-sales department.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>