Towond Outdoor Projector Screen Instruction Manual
- June 15, 2024
- TOWOND
Table of Contents
Outdoor Projector Screen
Instruction Manual
List of Accessories
(1) Upper crossbar x5
(2) Tripod x2
(3) Ground Nails x6| (4) Storage bag x1
(5) Screen x1
(6) Windproof rope x6
---|---
Curtain Installation Procedures
-
Check to see the attached picture: the 5 crossbars are assembled into a whole, which is used to support the upper part of the screen.
-
As shown in figure 1 :
Thread the screen onto the crossbar. -
(1). As shown in the following figure :
① Loosen the top screw of the triangle bracket as figure1.
② Unfold the triangle bracket as figure2 and figure3.
③ And then tighten the triangle bracket top screw as figure4.
(2) The wrong way to open the triangle
bracket as figure 1, figure 2, figure 3.
-
As shown in figure1:
Loosen the fixing screw of the triangle bracket.
Adjust the height or low degree of the triangle bracket.
-
As shown in figure 1 and figure 2:
Cross bar connect the top screws of the triangle bracket.
Then secure it with screws.
-
As shown in figure1:
The magic tape on the left and right sides of the curtain is fixed to the tripod. -
As shown in figure 1:
Use a rope to fix it outdoors triangle bracket at the top, and then fasten it to the soil with ground nails.
Scan the QR code below for a video of the
curtain installation
https://www.youtube.com/watch?v=jR2_5WW0YH4
If you have any questions, please feel free to contact our after-sales
department Mail: Towond2020@126.com