savio FL-02 LED Head Lamp User Manual

savio FL-02 LED Head Lamp

Product Information

Specifications

• Model: FL-02
• Power button: On/Off
• Adjustable strap
• COB LED : 100% luminous power – 350 lm, 40% luminous power – 135 lm
• XPE LED: 100% luminous power – 115 lm, 40% luminous power – 40 lm
• Stroboscope mode: Available
• Operating time: COB LED 100% – 2 hours, COB LED 40% – 4.5 hours, Stroboscope mode – 8 hours, XPE LED 100% – 4 hours, XPE LED 40% – 8 hours

Product Usage Instructions

Package Content
The package includes:

• LED Headlamp
• Adjustable strap
• USB-C charging cable

Product Diagram

Instructions for Use

• Step 1: Turning on the Headlamp
  To turn on the headlamp, press the power button once. This will activate the COB LED at 100% luminous power.

• Step 2: Adjusting Luminous Power
  To adjust the luminous power of the COB LED, press the power button again. Pressing it for the second time will switch the COB LED to 40% luminous power mode.

• Step 3: Switching to XPE LED
  To switch to the XPE LED, press the power button for the third time. This will turn on the XPE LED at 100% luminous power.

• Step 4: Adjusting Luminous Power of XPE LED
  To adjust the luminous power of the XPE LED, press the power button for the fourth time. This will switch the XPE LED to 40% luminous power mode.

• Step 5: Turning off the Headlamp
  To turn off the headlamp, press the power button for the fifth time.

• Step 6: Stroboscope Mode
  To enter stroboscope mode, press and hold the power button for 3 seconds. Stroboscope mode can be launched in every operation mode.

• Step 7: Wave Sensor Mode
  To enter wave sensor mode, press the button with the mode indicator light (red and green). This mode enables you to control the headlamp with hand movement to turn it on or off.

FAQ

• How long is the operating time of the headlamp?
  The operating time depends on the selected operation mode:

  • COB LED 100% – 2 hours
  • COB LED 40% – 4.5 hours
  • Stroboscope mode – 8 hours
  • XPE LED 100% – 4 hours
  • XPE LED 40% – 8 hours

• How can I adjust the luminous power of the headlamp?
  To adjust the luminous power, press the power button multiple times. Each press will switch between different luminous power modes.

Thank you for choosing Savio products!

• If our product meets your expectations, share your opinion with others on the portal Ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on the SAVIO Facebook Page, we will be very pleased.
• If there is something that we could improve on our products, please write to us at support@savio.net.pl.
  Thanks to your feedback, we will be able to better adapt the product to your expectations.
  Before starting the use of the purchased device it is recommended to read the whole manual.

Package content

• SAVIO FL-02 LED headlamp
• USB-A – USB-C 0.5 m cable
• User manual

Product diagram

1. Power button (on/off)
2. Adjustable strap
3. COB LED
4. Mode indicator
5. Wave sensor (on/off)
6. XPE LED
7. Charging USB-C socket

Instructions for use

1. Press the power button to turn on the LED COB at 100% luminous power.
2. Press the power button for the second time to switch LED COB to 40% luminous power mode.
3. Press the power button for the third time to turn on the LED XPE at 100% luminous power.
4. Press the power button for the fourth time to switch the LED XPE to 40% luminous power mode.
5. Press the power button for the fifth time to turn off the device.
6. To enter stroboscope mode press the power button and hold it for 3s (stroboscope mode can be launched in every operation mode).
7. To enter wave sensor mode press the button (mode indicator light will be red and green). This mode enables to control of the device with hand movement (turning on/off the device).

Operation modes

Technical specification

• Power supply: 1200 mAh Li-Po battery
• Power: 5 W (central light), 3 W (side light)
• Light sources: 40 × COB LED (central light), 1 × XPE LED (side light)
• Luminous flux: 350 / 135 / 115 / 40 lm
• Colour temperature: 7500 K
• Colour rendering index (CRI): 75
• Maximum range: 80 m
• Operation modes: COB LED 100% / COB LED 40% / stroboscope / XPE LED 100% / XPE LED 40%
• IPX waterproof rating: IPX4
• Material: ABS + silicone
• Operating time: 2 – 8 h*
• Charging time: 4 h
• Charging port: USB-C
• Cable length: 0.5 m
• Size: 55 × 35 × 100 mm
• Weight: 68 g
• The working time depends on the selected operation mode.

Safety conditions

• Use the product for its intended use, as improper use may damage the product.
• Do not expose the device to moisture, heat or sunlight, and do not use the product in a dusty environment.
• The device should be cleaned only with a dry cloth.
• Independent repairs and modifications result in automatic loss of the warranty.
• Hitting or dropping may damage the product.

Warranty

The warranty covers 24 months. Independent repairs and modifications result in automatic loss of the warranty. The warranty card is available for download on our website: www.savio.net.pl/en/service

DISPOSAL

Information on the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or a recycling centre. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthalates) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesions of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protection by proper waste collection. In such a way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for the production of new equipment.

Information for customers and contractors and communication regarding complaints:
Under Article 13 sections 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14. Your data will be processed to perform the contract, by Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp—z o.o. Your data will be stored based on the Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit the processing of your data. You have the right to complain to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your data will not be subjected to automated decision-making, including profiling referred to in Article 22 Sections 1 and 4 of the GDPR of April 27, 2016.

FOR MORE INFO
You can find the user manual in your language at: www.savio.net.pl/en/download

PRODUCER:

• Elmak Sp. z o.o.
• ul. Morgowa 81
• 35-323 Rzeszow
• www.savio.net.pl

References

• Strona główna - Savio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>