THORN AP1 WH Susp Set Great Britain Installation Guide
- June 15, 2024
- THORN
Table of Contents
THORN AP1 WH Susp Set Great Britain
Product Information
Specifications:
- Dimensions: 114.5mm x 70mm
- Pendant Rod Length: 250-1070mm (1m) and 250-1870mm (1.8m) Top: 320/400/500
Product Usage Instructions
Section 1: Pendant Rod Assembly
- Identify the pendant rod with the desired length.
- Attach the pendant rod to the top using the provided screws and Torx 15 screwdriver.
Section 2: Main Fitting Installation for Novaline Style Medium and Large
- Locate the main fitting labeled “Novaline Style Medium and Large”.
- Use the provided M4x20mm screws and Torx 15 screwdriver to attach the main fitting to the desired location.
- Tighten the screws with a torque of 1.5Nm (MAX).
- If needed, use the provided M4x6mm screws and PZ2 screwdriver to secure additional parts of the main fitting.
- Tighten these screws with a torque of 1.5Nm (MAX).
Section 3: Main Fitting Installation for Novaline Style Small
- Find the main fitting labeled “Novaline Style Small”.
- Attach the main fitting to the desired location using the provided M4x20mm screws and Torx 15 screwdriver.
- Tighten the screws with a torque of 1.5Nm (MAX).
- If necessary, use the provided M4x6mm screws and PZ2 screwdriver to secure additional components of the main fitting.
- Tighten these screws with a torque of 1.5Nm (MAX).
Section 4: Allen Key Usage
- Locate the 3mm Allen Key.
- Use the Allen Key to tighten screws that require a torque of 9 Nm (MAX).
Section 5: Additional Installation Steps
- Follow the instructions provided on Page 5 and Page 6 for further installation steps.
- Refer to the product manual for any additional information or troubleshooting.
FAQ:
-
Q: What are the dimensions of the product?
The product has dimensions of 114.5mm x 70mm. -
Q: What is the length range of the pendant rod?
The pendant rod comes in two length options: 250-1070mm (1m) and 250-1870mm (1.8m). -
Q: What is the top measurement for the pendant rod?
The top measurement options are 320/400/500. -
Q: What are the torque specifications for tightening screws?
The screws should be tightened with a torque of 1.5Nm (MAX), except for specific screws that require a torque of 9 Nm (MAX) as indicated in the instructions.
PENDANT ROD 320/400/500
Installation Instructions
96417865 01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>