Streamline N920PNK ORB Clawfoot Tub and Tray with External Drain User Guide
- June 15, 2024
- Streamline
Table of Contents
Streamline N920PNK ORB Clawfoot Tub and Tray with External Drain
Product Information
Specifications
- Material: Acrylic, ABS, Polystyrene, Plastic
- Resistance: Good resistance to acids
- Temperature Limit: Hot water temperatures not exceeding 65 Celsius
Product Usage Instructions
Cleaning the Bathtub
To clean the bathtub, please follow these steps:
- Use a soft cotton cloth or soft sponge.
- Avoid using acidic, alkali, or any products that are not suitable for use on Acrylic, ABS, Polystyrene, or Plastic.
- For general cleaning, fill the bathtub with warm water and add a couple of squirts of dish liquid. Allow it to sit for 30 minutes. Then drain the bathtub and wipe away any residue.
- You can also use cleaning products in aerosol cans or solvents, including acetone, for a deep clean.
- To remove light marks or scratches, apply toothpaste to the area and scrub with a soft cloth or sponge.
Deep Cleaning the Bathtub
If deep cleaning is necessary, follow these steps:
- Rinse or soak the tub in warm water for 30 minutes and add a bit of liquid soap or dish soap to the water.
- Rinse and dry with a soft towel.
Temperature Control
It is advised to always run some cold water before turning on the hot tap,
with hot water temperatures not exceeding 65 Celsius.
Repairing Scratches or Burns
If deep scratches or burns appear, please follow these steps:
- Use sandpaper with at least 1500 grit.
- Dampen the sandpaper slightly with water.
- Rub the sandpaper in a circular motion around the affected area, ensuring that you rub slightly wider than the affected area.
- Continue doing so until the scratch is no longer visible.
- To bring the affected area back to its shiny form, use a soft cloth and a small amount of polish to buff the rubbed area. Continue doing so until the affected area is restored to its original shine.
FAQ (Frequently Asked Questions)
-
Q: What cleaning products should I avoid using on the bathtub?
A: Avoid using acidic, alkali, or any products that are not suitable for use on Acrylic, ABS, Polystyrene, or Plastic. This includes bleach, organic solvents, caustic soda, multi-surface cleaners, bathroom cleaners, harsh solvents, burning cigarettes, strong chemicals such as dry-cleaning fluids, paint strippers, acetone, citrus-based chemicals, and nail/varnish removers. -
Q: Can I install the bathtub myself?
A: Due to the complexity of the installation procedure, it is recommended to hire a professional plumber for installation.
USE & CARE GUIDE
- In order to clean the bathtub, please only use a soft cotton cloth or soft sponge.
- Never use acidic, alkali, or any products to clean the bathtub that state on their label that they are not suitable for use on Acrylic, ABS, Polystyrene, or Plastic.
- To clean inside the bathtub, fill it with warm water and add a couple of squirts of dish liquid. Allow it to sit for 30 minutes. Let the bathtub drain and wipe away any residue. You can also use cleaning products in aerosol cans or solvents, including acetone for a deep clean.
- In order to remove light marks or scratches, apply toothpaste to the area and scrub with a soft cloth or sponge.
- If deep cleaning is necessary, rinse or soak the tub in warm water for 30 minutes and add a bit of liquid soap or dish soap to the water. Rinse and dry with a soft towel.
- It is advised to clean the surface of the bath regularly to remove any insoluble products. Warm soapy water should be used and afterwards, the bath should be wiped. Do not let cleaners soak in.
- It is advised to always run some cold water before turning on the hot tap, with hot water temperatures not exceeding 65 Celsius.
- If deep scratches or burns appear, please use sandpaper with at least 1500 grit. Dampen the sand pa per slightly with water and then proceed to rub the sandpaper in a circular motion around the affected area, ensuring that you rub slightly wider than the affected area.
- Continue doing so until the scratch is no longer visible. To bring the affected area back to its shiny form, please use a soft cloth and a small amount of polish to buff the rubbed area. Continue doing so until the affected area is restored to its original shine.
- The surface of the bathtub has good resistance properties to acids, but should not come into contact with alkalis or organic solvents, such as caustic soda, some multi-surface cleaners, bathroom cleaners, bleaches, harsh solvents, burning cigarettes, strong chemicals such as dry-cleaning fluids, paint strippers, acetone, citrus-based chemicals, and nail/varnish removers.
- Please read all instructions carefully before proceeding with installation.
- Due to the complexity of the installation procedure, a professional plumber is required.
Contact Information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>