ET2 Contemporary Lighting E21302-10BZ-BUL LED 7.8 Inch Bronze ADA Wall Sconce Wall Light Instruction Manual
- June 15, 2024
- ET2 Contemporary Lighting
Table of Contents
ET2 Contemporary Lighting E21302-10BZ-BUL LED 7.8 Inch Bronze ADA Wall
Sconce Wall Light
Product Information
Specifications
- Model: 121/$036
- Dimensions: Z’
- Weight: Z
- Power: ZZZ ZZ
- Color: Z Z
Product Usage Instructions
Initial Setup
- Unpack the product and remove all packaging materials.
- Place the product on a stable surface.
- Connect the power cord to the product and plug it into a power outlet.
- Press the power button to turn on the product.
Basic Operation
To use the product, follow these steps:
- Ensure that the product is powered on.
- Adjust the settings using the control panel or remote control.
- Refer to the product manual for specific operations and features.
Maintenance and Cleaning
To keep the product in good condition, follow these guidelines:
- Regularly clean the product using a soft, dry cloth.
- Avoid using abrasive cleaners or solvents that may damage the surface.
- Keep the product away from water and other liquids.
Troubleshooting
If you encounter any issues with the product, try these troubleshooting steps:
- Check the power connection and ensure the product is properly plugged in.
- Refer to the product manual for troubleshooting specific issues.
- If the problem persists, contact customer support for further assistance.
Frequently Asked Questions (FAQ)
Q: How do I change the settings on the product?
A: To change the settings, use the control panel or the remote control provided with the product. Refer to the product manual for detailed instructions.
Q: Can I use the product in wet conditions?
A : No, the product should be kept away from water and other liquids to avoid damage.
Q: What should I do if the product does not turn on?
A: Check the power connection and ensure that the product is properly plugged into a power outlet. If the problem persists, contact customer support for assistance.
Before Getting Started
- Read the instructions carefully before assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain them for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all the required contents for complete assembly.
- Take care when lifting. Assemble the product close to where you intend to install it.
- Do not over-tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation! Keep packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock!
- Disconnect from the power source before assembling or cleaning.
- Switch off, unplug, and allow the bulb to cool before replacing the bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Check the product cord to be sure is free torn or frayed.
- Caution: Xenon bulbs may burn you. Lamps should remain off for a minimum of 10 minutes before handling.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with a soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause color to fade.
PARTS
Before getting,started, ensure the package contains the following
components:
INSTALLATION
- Item/Model Number: E21302 Inca 1-Light Wall Sconce