eufy SECURITY PAP 22 2K Pan And Tilt Indoor Camera User Guide

eufy SECURITY PAP 22 2K Pan And Tilt Indoor Camera

Important Information

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.

WHAT’S INCLUDED

Indoor Cam 2K Pan & Tilt
Model: T8410X
Mounting Plate
USB Cable
USB Adapter
Mounting Screw Pack
microSD card (optional)
QSG

PRODUCT OVERVIEW

Indoor Cam 2K Pan & Tilt 

1. Lens
2. Microphone
3. SD card slot
4. Status LED
5. Speaker
6. Power input
7. SYNC button
   

SETTING UP THE SYSTEM

1. Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
   |
   ---|---
   
2. Sign up a eufy Security account. Go to the app homepage. Tap Add Device, and add the Indoor Cam Pan 2K to your system.
3. Follow the on-screen instructions to complete the setup.

LED Status

event
Solid bluish violet| System is initializing
Flashing blue and red alternately| Firmware upgrade in progress

MOUNTING THE INDOOR CAM

Select a Location for Mounting

The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.

• Disconnect the Indoor Cam from the power outlet before mounting.
• Keep the Indoor Cam at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view.
  Do this to avoid infrared reflection which can have a negative impact on the night vision performance.
  

Mount the Indoor Camera

To mount the Indoor Cam on the ceiling, follow the steps below:

1. Place the positioning card against the ceiling and then mark the points at which drilling will be required. Ceiling
   

2. Drill holes with a 5/16” (8 mm) drill bit.
   

3. Align the holes on the mounting plate with those in the ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Fix the screws with a Phillips Head screwdriver to fasten the mounting plate to the ceiling.
   

4. Align the grooves with the mounting plate and rotate the Indoor Cam clockwise until it clicks into place.

To mount the Indoor Cam on a wall, we recommend using the mounting bracket (not provided) as the illustration below.

POWERING ON THE INDOOR CAM

Connect the Indoor Cam to a power outlet using the provided USB cable and USB adapter. After being powered on, the Indoor Cam will be connected to the system. When it is successfully connected, the status LED will turn solid blue.

Rotate the Indoor Cam to adjust the view and check it using the live stream which you can access in the eufy Security app. You are now all set to use your Indoor Cam.

Tip:
For troubleshooting, check Help on the eufy Security app.

HomeKit Statement

Controlling this HomeKit-enabled accessory automatically and away from home requires a Home Pod, Apple TV, or iPad set up as a home hub. It is recommended that you update to the latest software and operating system.

NOTICE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004
Telephone: 1-800-988-7973

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/

This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.
The suitable temperature for T8410X and accessories is 0°C-40°C.
When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C.
Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the device and the guarantee article.
This charger is for indoor use only.
The charger type is TEKA-UCA20EU, output voltage/current is 5Vdc/2A. The plug considered as disconnect device of adapter. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max

Output Power: 19.99 dBm(ERIP)
Bluetooth Operating Frequency Range:2402~2480MHz; Bluetooth
Max Output Power:5.26 dBm(EIRP)
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany

This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.”

IC RF Statement:

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

This product complies with the radio interference requirements of the United Kingdom.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type T8410X is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://uk.eufylife.com

Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

CUSTOMER SERVICE

• Warranty
  12-month Limited Warranty

• Call Us
  United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
  United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
  Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00

• Email Us
  Customer Support: support@eufylife.com

@EufyOfficial
@EufyOfficial
eufyofficial

References

• eufy - Built with Care | Home Security System & Robovacs | eufy UK
• eufy - Built with Care | Home Security System & Robovacs | eufy UK
• eufy - Built with Care | Home Security System & Robovacs | eufy UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>