Barkbusters Aluminum Handguard Kit Ducati DesertX 2022-2023 Instructions
- June 4, 2024
- Barkbusters
Table of Contents
FITTING INSTRUCTIONS for…
• DUCATI DesertX (‘2022–on)
www.barkbusters.net
Preparation
Remove original handguards and bar end weights if fitted.
Installation for Right Side.
Repeat for Left side with applicable parts.
- Loosely assemble the clamp to the handlebar as per the diagram.
- Attach the handguard backbone (1) with applicable parts to the handlebar end and also to the clamp connector (5).
- Position the backbone so it is horizontal when viewed from the side.
- Tighten all bolts in the following order: (10), (9), (4) then (7).
Important: Use the specified torque setting over the page.
Recommended Torque Settings
M6| 10 Nm (7.4 lbf ft)
M8| 20 Nm (14.8 lbf ft)
CAUTION: Installation of the handguard is safety-relevant work and can be
complicated. We recommend the installation be performed by a motorcycle
service technician. Rideworx accepts no liability for damages caused by
improper mounting. All screws, bolts and nuts, including all replacement
hardware provided by Rideworx, should be tightened to the torque specified in
the table. After the first 50km of riding check all screws, bolts and nuts are
tightened to the correct torque. We recommend a medium-strength liquid thread
lock product on all fasteners.
WARNING: It is important there is a working clearance (approx 3mm)
between the throttle grip end and the handguard to ensure a free closing
throttle. Check operation of all handlebar controls, specifically, the
throttle, front brake, kill switch and clutch to ensure they are operating
correctly and are in accordance with the OEM specifications. Do not ride the
motorcycle if any controls are not operating correctly. Check periodically
that all bolts are tight.
Disclaimer:
A failure to follow these fitting instructions could cause serious injury,
death or property damage. These handguards are intended solely for use with
motorcycles/ATV/snowmobiles/scooters that have not been modified. They are not
designed
to prevent injury or death while riding or in an accident or crash. The user
must ensure that all controls are free of the handguards every time that they
ride. By installing and/or using this product you acknowledge that you accept
these terms
and have followed the fitting instructions.
Email: info@barkbusters.net
@BARKBUSTERSHANDGUARDS
INS-BHG-100-00-NP
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>