SCHRADER ELECTRONICS SCHEB Tyre Pressure Monitoring System User Manual
- June 9, 2024
- Schrader Electronics
Table of Contents
SCHRADER ELECTRONICS SCHEB Tyre Pressure Monitoring System
The device under test is manufactured by the grantee (Schrader Electronics)
and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b),
etc…, the grantee must ensure the end-user has all applicable/appropriate
operating instructions. When end-user instructions are required, as in the
case of this product, the grantee must notify the OEM to notify the end user.
Schrader Electronics will supply this document to the reseller/distributor
dictating what must be included in the end user’s manual for the commercial
product.
INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information (in blue) must be included in the end product user’s
manual to ensure continued FCC and Industry Canada regulatory compliance. The
ID numbers must be included in the manual if the device label is not readily
accessible to the end user. The compliance paragraphs below must be included
in the user’s manual.
FCC
ID:MRXSCHEB IC: 2546A- SCHEB
- This device complies with Part 15 of the FCC Rules and with Licence-exempt RSS standards of Industry Canada. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
- l’appareil ne doit pas produire de brouillage, et
- l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
- WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada’s technical specifications were met.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>