SCHRADER ELECTRONICS BG2BP4 TPMS Transmitter User Manual
- June 5, 2024
- Schrader Electronics
Table of Contents
SCHRADER ELECTRONICS BG2BP4 TPMS Transmitter User Manual
Introduction
The device under test is manufactured by the grantee (Schrader Electronics), and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, etc…, the grantee must ensure the enduser has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user.
Schrader Electronics will supply this document to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information (in blue) must be included in the end-product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user’s manual.
FCC
FCC ID: MRXBG2BP4
IC: 2546A-BG2BP4
This device complies with Part 15 of the FCC Rules and with ISED Canada license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause harmful interference,and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Schrader Electronics Ltd
Unit 11 Technology Park
Belfast Road
Antrim, Northern Ireland, BT41 1QS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>