RUSTA 302 LED Christmas Tree with Light User Guide

: June 15, 2024
: RUSTA

Table of Contents

SAFETY INSTRUCTIONS
IMPORTANT
STORAGE
RIGHT OF COMPLAINT
ASSEMBLY NOTE!
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RUSTA 302 LED Christmas Tree with Light User Guide

Thank you for choosing to purchase a product from Rusti!

Read through the entire manual before installation and use!
Christmas tree with lights
Read the user manual carefully to make sure that the product is assembled, used and maintained correctly, as described in the instructions in this user manual. Keep the user manual for future reference.

SAFETY INSTRUCTIONS

Read these use and assembly instructions carefully before you as simple the Christmas tree. Save them for future reference.
The Christmas tree must be assembled by an adult.
The Christmas tree is intended for indoor use only.
Due to the risk of cuts or crush injuries, be careful when you assemble the Christmas tree.
Do not place the Christmas tree near open flames or embers (such as candles).
Always keep the Christmas tree under supervision when the tree lighting is on.
Place the Christmas tree on a level surface, and make sure it is stand- ing stabile.
Keep watch over small children when they are near the Christmas tree.
Small children can easily put Christmas decorations in their mouths.
Do not overload the Christmas tree with heavy decorations. .

WARNING!
If these instructions are not followed, an accident may lead to serious personal injury or property damage.

IMPORTANT

Do not connect the light to the power source whilst still in the package.
The electric cord for this light cannot be replaced. If the cord is dam- aged, the entire product must be discarded.
The light can only be used with the transformer included in this pack- age.
Do not connect the light electrically to any other lighting.
These lamps cannot be replaced, but have a life span of approximately 10,000 hours.

STORAGE

Save the packaging to store the Christmas tree in.
Remove all the decorations.
Starting from the top, take apart each section.
Fold the branches against the stem.
Use water to clean the branches and stem if necessary. Never use solvents to clean the tree.
Place the tree parts in the packaging, with the longest parts on the bottom. .
Store the package in a cool, dry place – not exceeding 30°C.

RIGHT OF COMPLAINT

By law the product must be returned to the place of purchase along with the original receipt in the event of a complaint. The user is liable for any damage to the product that is caused by not using the product for its intended purpose or by not following this user manual correctly. The right of complaint will not apply in these instances.

INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from household waste. They should be taken for recycling in accordance with local rules for waste management.

ASSEMBLY NOTE!

The assembly illustrations can differ for each Christmas tree model. Depending on the model you purchased, each package has an upper and lower section, and the larger models have a middle section. The metal Christmas tree stand is included in the pack- age. Unpack the parts and remove any plastic material and tape.

Metal stand: Put the tree pole into the assembled metal stand making sure that it is fixed into the hole of the pan. Then, tighten the eye bolts necessary.
Insert the middle part of the tree into the trunk of the body and connect the light shin’s stack plug. Then insert the tree top into the trunk and connect stack plug.
Open all the branches.
Shape the branches. Start with tips farthest from the pole, one to the right, one to the left and one at the center of the stem.
After shaping the whole tree following the previous steps, step back and overall look at the tree. Slightly upsweep all branch tips for a uniform look.