RUSTA Verbier 3000 LED Christmas Tree with Lights User Manual
- June 3, 2024
- RUSTA
Table of Contents
RUSTA Verbier 3000 LED Christmas Tree with Lights
Thank you for choosing to purchase a product from Rusta!
Read through the entire manual before installation and use!
Christmas tree with lights
Read the user manual carefully to make sure that the product is assembled, used and maintained correctly, as described in the instructions in this user manual. Keep the user manual for future reference
SAFETY INSTRUCTIONS
- The Christmas tree must be assembled by an adult.
- The Christmas tree is intended for indoor use only.
- Due to the risk of cut or crush injury, be careful when you assemble the Christmas tree.
- Do not place the Christmas tree near open flames or embers (such as candles).
- Always keep the Christmas tree under supervision when the tree lighting is on.
- Place the Christmas tree on a level surface, and make sure it is standing stabile.
- Keep watch over small children when they are near the Christmas tree. Small children can easily put Christmas decorations in their mouths.
- Do not overload the Christmas tree with heavy decorations.
- Do not connect the light to the power source whilst still in the package.
- The electric cord for this light cannot be replaced. If the cord is dam aged, the entire product must be discarded.
- The light can only be used with the transformer included in this pack age.
- Do not connect the light electrically to any other lighting.
- These lamps cannot be replaced, but have a life span of approximately 10,000 hours.
WARNING!
If these instructions are not followed, an accident may lead to serious
personal injury or property damage.
ASSEMBLY INSTRUCTION
- Metal stand: Put the tree pole into the assembled metal stand making sure that it is fixed into the hole of the pan. Then, tighten the eye bolts necessary.
- Insert the middle part of the tree into the trunk of the body and connect the light shain’s stack plug. Then insert the tree top into the trunk and connect stack plug.
- Unfold all the branches.
- Shape the branches. Start with tips farthest from the pole, one to the right, one to the left and one at the center of the stem.
- After shaping the whole tree following the previous steps, step back and overall look at the tree. Slightly upsweep all branch tips for a uniform look.
Connect transformer making sure that lights work.Your tree is now ready to decorate and enjoy!
USE
3 DIFFERENT SETTINGS
- ON
- Flashing program: Every tenth light flashes, which together make up a loop of 2,700 steady lights and 300 flashing lights. The flashing time is 2 seconds per cycle (0.5 Hz).
- OFF
The light chain has a memory function that selects the most recent program you used when you turn on the lights.
3,000 LED LIGHTS
- Upper section: 300 lights (270 steady, 30 flashing)
- Middle section: 1,300 lights (1,170 steady, 130 flashing)
- Lower section: 1,400 lights (1,260 steady, 140 flashing)
STORAGE
- Save the packaging to store the Christmas tree in.
- Remove all the decorations.
- Starting from the top, take apart each section. Fold the branches against the stem.
- Use water to clean the branches and stem if necessary. Never use solvents to clean the tree.
- Place the tree parts in the packaging, with the longest parts on the bottom.
- Store the package in a cool, dry place – not exceeding 30 °C.
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original receipt in the event of a complaint. The user is liable for any damage to the product that is caused by not using the product for its intended purpose or by not following this user manual correctly. The right of complaint will not apply in these instances.
ENVIRONMENT AND RECYCLING
When the product is used up, leave it for recycling according to local waste
disposal regulations. Note that the product must not be disposed of with
normal household waste.
Customer Service
- Rusta Consumer contact: R usta Customer Service, Box 5064, 194 05 Upplands Väsby, SWEDEN
- Website:www.rusta.com
- E-mail:customerservice@rusta.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>