AIGOSTAR B30203AW2 Electronic Goosenck Kettle Instruction Manual
- June 15, 2024
- aigostar
Table of Contents
AIGOSTAR B30203AW2 Electronic Goosenck Kettle
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE PRODUCT AND RETAIN IT FOR FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Potential injuries may caused by misuse of this appliance. Please carefully
read this manual before using this product appliance is only allowd for the
intended use listed in the manual. Before powering on this product, please
check whether the voltage marked on the appliance is consistent with the
voltage in your house. In case of inconsistency, please do not use this
product and then contact the store where you buy this product.
- It is a must to insert the power plug of this product into an earthed power socket and ensure to earth it well.
- Do not operate any appliance with a damaged cord! If the power cord of this product is damaged, to avoid danger, you must arrange for a professional person from its manufacturer or maintenance department or a similar specialized person to replace the power cord.
- It is forbidden to use any component not recommended by the manufacturer of this product to avoid fire, electric leakage, or any other damage.
- This appliance is only to be used with the stand provided.
- It is forbidden to hang the power cord of this product on any edge of any table or make it in contact with any high-temperature surface; otherwise, the power cord will be damaged.
- It is forbidden to place and use this product on or beside any high-temperature gas cooking stove or electric oven.
- Please do not heat this product when it is empty, otherwise, its heating tube will be damaged.
- CAUTION: DO NOT IMMERSE THE APPLIANCE IN ANY LIQUID
- It is forbidden to soak this product in water or any other liquid to avoid fire, electric leakage or endanger personal safety.
- WARNING: When water is boiling, please do not move the kettle lid.
- CAUTION: Place the kettle lid properly so that steam is directed away from the handle and not be able to scald yourself or any other person.
- ATTENTlON: Please ensure that you have pulled the power plug out whenever you want to fill/move/clean the electric kettle.
- The heating element surface is subject to residual heat after use before cleaning it, you must first cool the kettle to prevent injury.
- When the kettle is not cool but it is necessary to fill it with water, you should carefully open its lid.
- It is forbidden to touch its high-temperature surface; Please use the handle whenever you want to move the kettle. Otherwise, you will be scalded.
- When pouring the boiled water out, please be slow and careful to prevent the boiled water from scalding yourself or any other person.
- When water is heating or after water is boiling, you are forbidden to touch the steam gushing from the spout or open the kettle lid to prevent you from being scalded by the steam.
- This appliance can be used by children aged 8 years and above if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
- When using this product, you should place it at a horizontal and firm place out of children’ s reach; otherwise, the kettle will scald people or be damaged if a child pulls its power cord or knock it.
- This product is not appropriate for those who suffer physical, sensory, or mental disability or lack experience and knowledge of use (including children) unless such persons’ guardians give supervision or guidance related to the use of this product.
- This product can only be used for houses, and places, and outdoor usage is forbidden:
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse the cord, plugs, or (state-specific part or parts in question) in water or other liquid.
- Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to remove the plug from the wall outlet.
- HOUSEHOLD USE ONLY.
- Save these instructions
TECHNICAL SPECIFICATIONS
Specifications and design are subject to change without notice.
PARTS DIAGRAM
- Display
- Menu/Keep warm buttons
- Rotary knob
FUNCTIONS DESCRIPTIONS
- Control the appliance by slightly pressing the buttons and rotary knob.
- LED digital display prompts and buzzer prompts
- Temperature probe fault protection
- Keep warm function: The default keep warm time is 60 minutes and cannot be adjusted.
OPERATING INSTRUCTIONS
Stand by state
- Connect the appliance to the power supply, the buzzer rings once and the display is briefly illuminated for 1 s, and the appliance enters the standby state.
- Zero crossing fault & NTC failure & NTC dry burning fault & NTC short circuit fault: Short press rotary knob to cancel fault display.
- Short press the TEMP button, the buzzer rings once, and the appliance enters the power-on state.
Power-on state/Working state
- Long press the Menu button for 3s to switch the temperature units between °C and °F (the default temperature unit is °F)
- Short press the Keep Warm button to turn on/off the Keep Warm function. When the keep warm function is activated, the keep warm icon will light up. (The keep warm function is off by default)
- When the appliance is powered on, turn on the keep warm function, and the appliance will enter the working state.
- When the appliance is working, turn on the keep warm function, The keep warm time is reset to 0 and recalculated.
- Long press the Keep Warm button to turn on or turn off the buzzer function, when the buzzer function is off, the mute icon will light up. (The buzzer function is on by default)
- Long press the TEMP button for 3s, and the timing time returns to 0 and enters the timing mode.
- Under the timing mode, short press the rotary knob to exit the timing mode.
- In non-timing mode, short press the rotary knob:
- When the appliance is powered on, it will enter the working state.
- When the appliance is working, it will back to power on state.
- Rotate the TEMP knob to adjust the heating temperature
- 104 °F ~212°F in 1 °F increment. (The default setting is 212°F)
- 40°C~100°C in 1°C increment.
- When the heating temperature is adjusted, the keep warm time will be recalculated.
- Short press the Menu button to select the specific temperature settings in the order of 40°({104 °F), 70°({1 58 °F), 80°((176 °F), 90°((194 °F).
- Lift the kettle, the display shows “-E-“
- Non-timing mode: Lift up the kettle, and the appliance will stop heating report the kettle failure, and return to the standby state after 20 minutes;
- Timing mode: Lift up the kettle, the appliance will stop heating, and the timing mode will continue to work.
- Heating & Keep warm
- If the current water temperature in the kettle needs to be kept non-working, press the “Keep Warm” key directly;
- In the process of temperature setting or working state, if the water temperature set by the target needs to be kept, press the “Keep Warm” key simultaneously while setting the general functions.
FAILURE CODE
ALTITUDE DETECTION
The test starts when the temperature is greater than or equal to 80°C/176°F.
If the water temperature does not rise after continuous heating for some time,
the product will automatically judge that it is in a plateau area. At this
point, the real-time temperature gradually increases to the target temperature
( increase by 1°C/2°F every 500m ), and then stops heating.
MAINTENANCE AND DESCALING
- Always unplug the appliance and allow it to cool down before cleaning.
- Do not use chemical, steel wool, or abrasive cleaners to clean the outside of the kettle, as these will scratch the surface. The surface of the kettle may be wiped with a damp cloth and polished with a soft dry cloth.
- Do not immerse the kettle or base unit in water or other liquids.
- To prolong the kettle’s operational life, regularly clean the mineral deposits inside it.
- Pour 0.5L white vinegar into the kettle, fill with water, and allow to stand for over 1 hour.
- Empty the kettle, and wipe off the remaining deposits with a damp cloth.
- Fill the kettle with clean water; bring it to a boil, and throw the water away.
- If necessary, repeat the operations above several times.
WARRANTY
- WARRANTY: 1 YEAR
AIGOSTAR INC
- 489 YORBITA RD, CITY OF INDUSTRY, CA 91744(UNIT A)
- WWW.AIGOSTAR.COM.
MADE IN CHINA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>