PROAIM VCTR-TH Dual Tripod Holder for Camera Cart User Manual

June 4, 2024
PROAIM

PROAIM LOGO Dual Tripod Holder For Camera Cart (VCTR-TH)
Assembly Manual PROAIM VCTR TH Dual Tripod Holder for Camera
Cart

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG
1

38mm (OD) Dia Mast

|

PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG
2

Accessory Cross Bar with Clamp

---|---

Tripod Holder Bar with Clamp

|

1 x Pair Tripod Holder

|

1 x 38mm (ID) Clamp

|

5mm, 6mm Allen key

Tripod Holder Setup

  • Remove both knobs of the 38mm (ID) clamp.PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG 7
  • Attach the clamp to the bottom crossbar and secure it properly using both knobs.PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG 8
  • Image showing clamp attached to the crossbar.
  • Loosen the side clamp knobs of the accessory crossbar and mount the crossbar on the side rods of the cart.PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG 10
  • Align the crossbar and secure it by tightening the side clamp knobs.PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG 11

Rod Mounting

  • Insert the 38mm (OD) mast into the clamp hole on the bottom crossbar.PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG 12
  • Tighten the ratchet knob of the top accessory crossbar clamp as shown in the image.
  • Loosen the ratchet knob and open the clamp on the tripod holder bar.
  • Mount the tripod holder bar on the 38mm mast and tighten the ratchet knob.PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG 15

Tripod Holder Mounting

  • Remove the knob of the tripod holder.PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG 16
  • Slide and mount the tripod holder on the tripod holder bar.PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG 17
  • Repeat the process for the other tripod holder.PROAIM VCTR TH Dual Tripod Holder for Camera Cart - FIG 18
  • Insert and tighten the knob to secure the tripod holder properly.
  • Both the tripod holders are correctly attached to the cart, as shown in the image.

NOTE: Proaim Dual Tripod Holder for Camera Cart is a perfect add-on accessory to carry or store two full-size tripods on the cart.PROAIM VCTR TH
Dual Tripod Holder for Camera Cart - FIG 20

YOUR PROAIM DUAL TRIPOD HOLDER FOR THE CAMERA CART IS ALL DRESSED UP AND READY TO GO!

PROAIM VCTR TH Dual Tripod Holder for Camera Cart 2

(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from the date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, or lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

PROAIM User Manuals

Related Manuals