Zyxel NWA210AX PoE Access Point Quick Start Guide

Zyxel NWA210AX PoE Access Point

Details can be found from the “User’s Guide”

NWA210AX

802.11ax (WiFi 6) Dual-Radio PoE Access Point

Hardware Installation

Connect the UPLINK port to a router with Internet access. If you are not using PoE, connect the NWA210AX power socket to an appropriate power source.

Option A Cloud Management

Option 1: Use MAC address and serial number to add a device in the NCC https://nebula.zyxel.com

Follow the steps below to manage the NWA210AX through the Zvxel cloud-based network management system.

Note: Make sure the connected router has Internet access. G)

1. Go to the Zyxel Nebula Control Center (NCC) website (https://nebula.zyxel.com). Click Get Started to sign up for a myZyxel account and log in.
2. Create an organization and a site (network) in the NCC.
3. Enter the NWA210AX’s LAN MAC address and serial number (S/N) (see the label on the device) in the NCC configuration screen.
   Note: The NWA210AX will go into cloud management mode automatically and restart after it is registered to a site. See the NCC User’s Guide for more information about configuring the NWA210AX through the NCC.

Option 2: Use Zyxel Nebula Mobile app to add a device in the NCC

• Download and open the Zyxel Nebula Mobile opp. Log in with your myZyxel account.

Where to find QR code:

• Create an organization and site or select an existing site. Scan the NWA210AX’s QR code to add it to the site. (You can find the QR code in its web configurator or on a label on the device or its box.)

Note: The NWA210AX will go into cloud management automatically and restart after it is registered to a site.

Standalone Management

WiFi connection

From a WiFi-enabled computer, search for the NWA210AX’s default WiFi network name (Zyxel-xxxx, where xxxx is the last four characters of the MAC address) and connect to it.

• Open your web browser and enter “http://1.1.1.1” for initial configuration. Enter the default user name (admin) and password (1234). Click Login.

  • Note: If the NWA210AX cannot connect to the Internet, use the DHCP-assigned IP address of the NWA210AX to access its web configurator. Check the connected router or DHCP server for the IP address of the NWA210AX

• http://1.1.1.1 (First-time configuration only)

• User Name: admin Login Password: 1234 (default)

• The DHCP-assigned IP address of the NWA210AX to access its web configurator. Check the connected router or DHCP server for the IP address of the NWA210AX.

Wired connection

• http://192.168.1.2

• User Name: admin Login Password: 1234 (default)

• Use an Ethernet cable to connect your computer to the UPLINK port of the NWA210AX through a PoE injector or PoE switch.

• Use its DHCP-assigned IP or default static IP address “http://192.168.1.2” to access the web configurator. Make sure your computer IP address is in the same subnet as the NWA210AX’s.

Wizard setting

• The wizard appears automatically. Use the wizard to set up your NWA210AX.
  • Note: It tokes 1 to 2 minutes to apply your wizard changes. The power LED will blink red and green alternatively. The power and WiFi LEDs then turn steady green when the system is ready. Check the Dashboard screen ond note down the NWA210AX’s IP address in case you need to access it’s web conftgurator again.
  • Note : The 1.1.1.1 is for initial setup only. It is not usable after the NWA210AX is configured.
• Use the NWA210AX’s new wireless settings (SSID and key) to re-connect to the NWA210AX’s WiFi nSDNork for Internet access if you change them in the wizard.

Wall / Ceiling Mounting

• Wall mounting: Drill two holes for the screw anchors (A), 62.4 mm apart. Insert the screw anchors into the wall.

• Ceiling mounting: Drill two holes for the screw anchors (A), 62.4 mm or 70.1 mm apart. Insert the screw anchors into the ceiling.

• Install two mounting screws through the holes on the bracket (B) into the plugs/anchors to secure the bracket to the wall/ceiling. Make sure the screws are snugly and securely fastened to the wall/ceiling.

• After the bracket is attached to the wall/ceiling, slide the NWA210AX onto the bracket until it clicks into the place.

T-bar Ceiling Mounting

1. Attach two clips to the ceiling grids as shown.
2. Install two screws to secure the bracket to the clips.
3. Slide the NWA210AX onto the bracket until it clicks into place.

Note: Clips (ACCESSORY-ZZ0105F) are sold separately.

Grounding

• Remove the M4 ground screw from the NWA210AX’s rear panel as shown. Secure o green/yellow ground cable (18 AWG or smaller) to the NWA210AX’s rear panel using the M4 ground screw.

• Attach the other end of the ground cable to o wall or the ground. Follow your country’s regulations and safety instructions to electrically ground the device properly. Qualified service personnel must confirm that the building’s protective earthing terminal is valid.

Resources

• For Datasheet, please visit: https://manuals.plus/m/4a3466df95b603b65e02e374759e3ad6650df936037bbc955390bd9bbcf1d4c6
• For Quick Sales Guide, visit: https://manuals.plus/m/7355fdfd27fdd186b14818f761997b2265456f51f885d7288391c7d2bdfffd57
• For User’s Guide, visit:https://manuals.plus/zyxel/zyxel-nwa210ax-poe-access-point-users-guide

Support Information

• North America
  • + 1 800 255 4101
  • support@zyxel.com
• EU
  • https://support.zyxel.eu

See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.

EU Importer

• Zyxel Communications A/S
• Gladsaxevej 378, 2. th. 2860 S0borg, Denmark
• https://www.zyxel.com/dk/da/

UK Importer

• Zyxel Communications UK Ltd.
• 2 Old Row Court, Rose Street, Wokingham,
• RG40 1XZ, United Kingdom (UK)
• https://www.zyxel.com/uk/en/

US Importer

• Zyxel Communications, Inc
• 1130 North Miller Street Anaheim, CA 92806-2001
• https://www.zyxel.com/us/en/

Copyright© 2021 Zyxel Communications Corp. All Rights Reserved.

Frequently Asked Questions

How do I install the Zyxel NWA210AX hardware?

To install the hardware, connect the UPLINK port to a router with internet access. If you are not using PoE, connect the NWA210AX power socket to an appropriate power source. You can also choose between cloud management or standalone management options for configuration.

How can I mount the NWA210AX on a wall or ceiling?

For wall mounting, drill two holes for screw anchors, 62.4 mm apart, and insert the screw anchors into the wall. Attach the bracket to the wall with screws and slide the NWA210AX onto the bracket. For ceiling mounting, follow a similar process, adjusting the hole distance as needed. T-bar ceiling mounting is also possible with additional clips (sold separately).

What about grounding the NWA210AX?

To ground the device, remove the M4 ground screw from the NWA210AX's rear panel and attach a green/yellow ground cable (18 AWG or smaller) to it. Secure the other end of the ground cable to a wall or the ground according to your country's regulations and safety instructions.

What is the Zyxel NWA210AX PoE Access Point?

The Zyxel NWA210AX is a dual-radio PoE Access Point that supports the latest WiFi 6 (802.11ax) standard. It provides high-speed wireless connectivity for various applications.

How can I install the NWA210AX hardware?

To install the NWA210AX, connect the UPLINK port to a router with Internet access. If you're not using Power over Ethernet (PoE), connect the NWA210AX power socket to a suitable power source.

What are the options for mounting the NWA210AX?

You can mount the NWA210AX on a wall or ceiling using the provided brackets and screws. T-bar ceiling mounting is also possible with additional clips (ACCESSORY-ZZ0105F, sold separately).

How do I properly ground the NWA210AX?

To ground the NWA210AX, remove the M4 ground screw from the rear panel and attach a green/yellow ground cable (18 AWG or smaller). Secure the other end of the cable to a suitable wall or ground following your country's regulations and safety instructions.

What is the maximum wireless speed supported by the Zyxel NWA210AX?

The Zyxel NWA210AX supports a wireless speed of up to 575Mbps in the 2.4GHz band and up to 2400Mbps in the 5GHz band, making it compatible with the WiFi 6 (802.11ax) standard.

Can I use the NWA210AX with Power over Ethernet (PoE)?

Yes, the NWA210AX supports PoE (802.3at) for power delivery, drawing up to 19W of power.

Is the NWA210AX compatible with cloud-based network management?

Yes, the NWA210AX offers cloud management through the Zyxel Nebula Control Center (NCC) or the Zyxel Nebula Mobile app, providing flexibility in managing your device.

What is the operating temperature and humidity range for the NWA210AX?

The NWA210AX can operate in temperatures ranging from 0°C to 50°C (32°F to 122°F) and humidity levels between 10% to 95% (non-condensing).

Is the NWA210AX suitable for both wall and ceiling mounting?

Yes, the NWA210AX can be mounted on both walls and ceilings using the provided brackets and screws. It also supports T-bar ceiling mounting with separate clips (ACCESSORY-ZZ0105F).

Download The PDF Link:Zyxel NWA210AX PoE Access Point Quick Start Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>