MOUNTUP MU7005 Premium Single Monitor Stand Instruction Manual
- June 15, 2024
- MOUNTUP
Table of Contents
MOUNTUP MU7005 Premium Single Monitor Stand
Product Information
Specifications:
- Model: Premium Single Monitor Stand
- Compatibility: 75 x 75 mm and 100 x 100 mm VESA patterns
- Weight Capacity: 4.4 ~ 33 lbs or 2 ~ 15 kg
- Model Number: Y100-US2.0
Product Usage Instructions
Safety Instructions
Before assembly, layout all components and hardware. Check that all parts are included and undamaged. It is important to read and understand the manual carefully before installing or using this monitor arm.
Warning
Do not exceed the weight capacity of the monitor stand. If you have any
questions regarding the installation or usage of this product, please contact
our customer service before returning it.
Assembly Steps
Step 1: Clamp Installation or Grommet Base Installation
Option A: Clamp Installation
- Mount Bracket (8) to Base (5) using Bolts (C). Tighten the bolts with the 4mm Allen Key (F).
- Install the cushion (13) on the base (5) to avoid scratching the table top.
- Attach Clamp (10) to Bracket (8) using Bolts (D). Tighten them with the 4mm Allen Key (F).
- Adjust the Clamp width to fit your desk. Secure the stand to the desktop by tightening the Clamp or using the Allen Key (G).
Option B: Grommet Base Installation
- Ensure that your desktop has a hole between 0.4” and 2.4” in diameter for this installation option. You can also use an existing grommet hole.
- Install the cushion (13) on the base (5) to avoid scratching the table top.
- Insert the long bolt (11) through the washer (12) and the hole on the table top. Use the Allen Key (H) to tighten it securely.
Step 2: Arm Installation
Connect the upper arm (7) and the lower arm (6) using the screw (E) through the rivet nut. Tighten it with the Allen Key (F).
Warning:
- Tighten the screws (E) on the Lower Arm to prevent the Upper Arm from becoming separated during adjustment.
- Do not use drills as they may damage the screw.
Insert the lower arm into the base and adjust the screw with the Allen Key (F) to fix the lower arm. The lower screw is used to adjust the tightness of the connection between the base and the bracket arm to avoid shaking.
Step 3: Attach Monitor
Option A: Flat Back Monitor
- Attach the VESA plate (9) to the back of your monitor.
- Secure it by using a 5mm Allen Key (G) to tighten screws (A or B) along with washers (3). Be careful not to tighten the screws excessively to avoid damaging the monitor.
Option B: Curved / Recessed Back Monitor
- Attach the VESA plate (9) to the back of your monitor.
- Secure it by using a 5mm Allen Key (G) to tighten screws (1 or 2) along with washers (3) and spacers (4). Be careful not to tighten the screws excessively to avoid damaging the monitor.
Step 4: Hang Monitor
Slide the monitors onto the head of the arm. Lock the security knob. Make
sure the security knob is locked before rotating the monitor.
FAQ
Q: What are the compatible VESA patterns for this monitor stand?
A: This monitor stand is compatible with 75 x 75 mm and 100 x 100 mm VESA
patterns.
Q: What is the weight capacity of this monitor stand?
A: The weight capacity of this monitor stand is 4.4 ~ 33 lbs or 2 ~ 15
kg.
Q: Can I use this monitor stand with a curved or recessed back monitor?
A: Yes, you can use this monitor stand with a curved or recessed back
monitor. Please follow the instructions provided for attaching the VESA plate
securely.
Q: How do I adjust the clamp width to fit my desk?
A: To adjust the clamp width, loosen the clamp or use the Allen Key to
adjust it according to your desk thickness. Once adjusted, tighten the clamp
securely.
Q: Can I use this monitor stand with a desk that has a grommet hole?
A: Yes, you can use this monitor stand with a desk that has a grommet
hole. Follow the instructions provided for grommet base installation.
Q: How do I prevent the upper arm from becoming separated during
adjustment?
A: Tighten the screws on the lower arm to prevent the upper arm from
becoming separated during adjustment.
Q: How do I secure the stand to the desktop?
A: You can secure the stand to the desktop by either tightening the clamp
or using the Allen Key to tighten the bolts.
Q: How do I hang the monitor on the arm?
A: Slide the monitors onto the head of the arm and lock the security
knob. Make sure the security knob is locked before rotating the monitor.
If you have any questions, please feel free to contact Customer Service via Amazon before returning.
SAFETY INSTRUCTIONS
BEFORE ASSEMBLY
WARNING
- Layout all components and hardware. Check all parts are included and undamaged.
- Should anybody intends to install or use this monitor arm, please read and understand this manual carefully.
- This product contains small items that could be a choking hazard if swallowed.
- KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
- Improper installation, such as using the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury caused by improper mounting or inappropriate use.
- If you do not understand these instructions or have any doubt about the safety instructions, assembly or use of this product, please contact our customer service.
PACKAGE CONTENTS
ASSEMBLY STEPS
STEP 1: Clamp Installation OR Grommet Base Installation
OPTION A: Clamp Installation
Mount Bracket (8) to Base (5) with Bolts (C). Bolts could be tightened by the
4mm Allen Key (F).
Install the cushion (13) on the base (5) to avoid scratching the table top.
There are two sets of key slot holes to choose from for different desktop thicknesses.
Attach Clamp (10) to Bracket (8) with Bolts (D) then tighten them with 4mm Allen key (F).
Adjust the Clamp width to fit with desk.
Secure stand to desktop by tightening Clamp or by Allen key (G).
OPTION B: Grommet Base Installation
Ensure the desktop has a hole between 0.4” and 2.4” in diameter to use this option. Using a grommet hole that is already in your desktop is acceptable.
Install the cushion (13) on the base (5) to avoid scratching the table top.
Insert the long bolt (11) through the washer (12) and the hole on the table top, and then use the Allen key (H) to tighten
STEP 2: Arm Installation
Connect the upper arm (7) and the lower arm (6) with the screw (E) through the rivet nut, and tighten it with an Allen key (F).
WARNING:
- Tighten the screws (E) on the Lower Arm and this will prevent the Upper Arm from becoming separated from the Lower Arm during adjustment.
- Please don’t use any drills it will damage the screw.
Insert the lower arm into the base and adjust the screw with the Allen key (F) to fix the lower arm.
-
The Top Screw
OPTION A: If you want to swivel ±180°, just loosen the top screw.
OPTION B: If you want to swivel ±90°, just lock the top screw. -
The Lower Screw
The lower screw are used to adjust the tightness of the connection between the base and the bracket arm to avoid the arms from shaking.
STEP 3 : Attach Monitor
OPTION A: Flat Back Monitor
Attach the VESA plate (9) to the back of monitor and secure it by using a 5mm Allen Key (G) to tighten screws (A or B) along with washers (3).
Do not tighten the screws excessively or your monitor might be damaged.
OPTION B: Curved / Recessed Back Monitor
Attach the VESA plate (9) to the back of monitor and secure it by using a 5mm Allen Key (G) to tighten screws (1 or 2) along with washers (3) and spacers (4).
Do not tighten the screws excessively or your monitor might be damaged.
STEP 4: Hang Monitor
Slide the monitors onto the head of arm.
Lock the security knob. Make sure the security knob is locked before you
rotate the monitor.
Important Notice:
The pressure of the gas spring is initially set to an intermediate value.
So when the monitor hangs, make sure to hold it with both hands and don’t let
it drop suddenly.
STEP 5: Adjust monitor tilting angle
Limit screw can prevent the head from sinking.
This screw can be removed when you need the display to be lowered (0°~-45°).
STEP 6: Adjust Gas Spring Tension
For proper functioning of this mount, depending on different weight of monitor
you might need to adjust tension in upper arm (7) using 6mm Allen Key (H).
The initial value of the scale is the middle value of the force range.
The force value of the gas spring can be understood through the scale, which
is convenient for modification
Note:
Be sure to keep the arm in horizontal position during adjustment.
Or else it would be difficult to adjust the mount or damage the mount.
Situation 1: Arm falls down
Upper Arm with monitor falls down and fails to stay where intended.
Solution:
Turn the inside screw counterclockwise (“+”direction) to increase gas spring
tension until the arm can stay as intended.
Situation 2: Arm rises up / can’t be pressed down
Upper Arm with monitor rises up automatically or can’t be pressed down and
fails to stay where intended.
Solution:
Turn the inside screw clockwise (“-”direction) to decrease gas spring tension
until the arm can stay as intended.
STEP 7: Cable Management
Remove Cable Cover
Remove the cable cover by grasping both sides of one end of the cover with the fingers of both hands, and then pulling it to the left and right respectively.
Attach Cable Cover
Run cables from monitor through bottom of arm. Reattach plastic covers as
shown in diagram.
Adjust as Desired
Adjust monitor position and rotation.
Note: To ensure stability, the tightness of the rotating axis has been preseted, so it would be kind of difficult to rotate the VESA plate.
Suggestion: Please attach the monitor first, then hold the two sides of it with both hands, and rotate vigorously. If that doesn’t work out, please do not hesitate to ask for our help.
WARNING:
For your safety, do not move the stand off your desk!
Product Dimensions
CAUTION AND MAINTENANCE
- Never allow children to climb, stand, hang, or play on any part of monitor or stand.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>