strex SP278 Car Phone Holder Instruction Manual
- June 15, 2024
- STREX
Table of Contents
INSTRUCTION MANUAL
SP278 Car Phone Holder
IF ANY PART IS MISSING, DISTORTED OR BROKING PLEASE CONTACT
INFO@STREX.NL WITH YOUR ORDER NUMBER AND PART NUMBER,
WE WILL SEND A REPLACEMENT PART TO YOU AS SOON AS POSSIBLE
For dashboard
STEP 1
Loosen the nut, then insert the retractable rod to kthe back of the mobile
holder and tighten the nut
STEP 2
Clean the dashboard surface from any dust or grease
STEP 3
Tear off the protective sticker from the holder
STEP 4
Unlock the buckle, mount it on the car dashboard surface and lock the buckle
Optional – Using the added extra strong adhesive pad
The extra adhesive strip which is optional, can be mounted to the dashboard if
using the standard attached adhesive pad only is not strong enough.
For windshield
STEP 1
Clean the glass surface from any dust or grease
STEP 2
Tear off the protective sticker
STEP 3
Unlock the buckle, mount it on the windscreen glass surface and lock the
buckle
For air vent
STEP 1
Insert the lever into the telescopic clamping arm
STEP 2
Assemble the vent mount to the back of the mobile holder and tightened the nut
STEP 3
Find a suitable spot, press and hold the lever and insert the vent mount into the ventilation shaft
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>