Youlifada 3IN1-5 Push Pull 3 In 1 Wireless Charger and Stand Instruction Manual

**Youlifada 3IN1-5 Push Pull 3 In 1 Wireless Charger and Stand Instruction Manual

**

PACKAGING LIST

• YLF-3IN1-5

• TYPE-C (1.2M)

• operation instructions

HOW TO USE

1. Connect the type-C charger to the wireless charging.
2. When the power supply is connected, the blue LED indicator light will light up.
3. When pulling the sliding bracket and lifting a wireless charging mobile device, the green LED will light up and start charging. (The LED will only change when the smartphone is in the charg -ing position.)
4. To achieve optimal performance, mobile devices must be placed in the correct position.
5. After charging, separate the mobile device from the product.

• Due to the characteristics of the product, efficiency may vary.

SPECIFICATIONS

PRODUCT MODEL| YLF-3IN1-5| PRODUCT NAME| Push-Pull 3-IN-1 Wireless charger & Stand
---|---|---|---
INPUT| 9V/3A| OUTPUT| Smartphones: 5V or 9VWireless headset: 5ViWatch: 5V
CHARGING DISTANCE| 4~10mm
SIZE| 59x119x106mm| WEIGHT| 145g

NOTE

• Please use this product in an environment of 0°-40°C.
• Do not disassemble or repair this product at will.
• Pay attention to dampness, high temperature, high heat, exposure, and other extreme areas.
• Do not charge products with high voltage.
• Do not apply excessive pressure to the product.
• It is recommended to use a high-speed charger and cable above 25W.
• Please use in a place with good air circulation.
• For optimal performance, please place the wireless charging device in the correct position.
• When using sofas, blankets, fabric materials, etc., it is not possible to dissipate heat and a fire may occur.
• Please note that conductive foreign objects such as liquids, metal powders, etc. do not enter the connection part of the charger.
• Do not place credit cards or other information storage media near the wireless charger. Storage information may be damaged.
• Do not place the product near the stove.
• If the ambient temperature is higher than 30* C, the charging time may increase.
• If there are coins and other metal substances between the wireless charger and the phone, charging may be interrupted.
• Metal materials may become hot during the filling process.
• There is a risk of overheating and catching fire when overcharging with foreign objects such as metals and magnets
• When wearing a thick shell and charging, it may not be possible to charge. Please be aware.

PRODUCT PARAMETERS

Product name: Push-Pull 3-IN-1 Wireless charger & Stand
Input: 9V 3A/12V 2A
Output: 5W/7.5W/10W/15W(Max)
Bluetooth headset: 5W
Watch: 3W
Interface: Type-C input
Material quality: ABS+PC
Product model: YLF-3IN1-5
Producer: Made in China

FCC WARNING

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

MADE IN CHINA

Documents / Resources

| Youlifada 3IN1-5 Push Pull 3 In 1 Wireless Charger and Stand [pdf] Instruction Manual
3IN1-5 Push Pull 3 In 1 Wireless Charger and Stand, 3IN1-5, Push Pull 3 In 1 Wireless Charger and Stand, 3 In 1 Wireless Charger and Stand, Wireless Charger and Stand, Charger and Stand
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>