Youlifada S01 Triangular Bracket Wireless Charging Instruction Manual
- June 16, 2024
- Youlifada
Table of Contents
Triangular bracket
wireless charging
OPERATION INSTRUCTIONS
packaging list
HOW TO USE
- Connect the bottom type-C charging interface.
- Turn on Bluetooth on your phone, connect to BT-TIME, and synchronize with your phone’s time.
- Tap the position above time to change the color of the bottom RGB light, and long press to turn it off.
- The top can be used for phone charging, and can also be used to place wireless Bluetooth earphones for charging.
- The charging position of the watch can be lifted and retracted.
- The charging position of the earphones must be placed in the center position for charging, and the phone can also be horizontally placed here for charging, serving as a phone holder.
Due to the characteristics of the
product, efficiency may vary.
specifications
PRODUCT MODEL| YLF-SO 1| PRODUCT NAME| 5inl Triangular bracket wireless
charging
---|---|---|---
INPUT| 9V 3A/1 2V 3A| OUTPUT| Smartphones: 5V or 9V Wireless headset: 5V
iWatch: 5V
CHARGING DISTANCE| 2-8mm
SIZE| 1 501501 50mm| WEIGHT| 260g
NOTE
- Please use this product in an environment of 0°-40°C.
- Do not disassemble or repair this product at will.
- Pay attention to dampness, high temperature, high heat, exposure, and other extreme areas.
- Do not charge products with high voltage.
- Do not apply excessive pressure to the product.
- It is recommended to use a high-speed charger and cable above 25W.
- Please use in a place with good air circulation.
- For optimal performance, please place the wireless charging device in the correct position.
- When using sofas, blankets, fabric materials, etc,, it is not possible to dissipate heat and a fire may occur.
- Please note that conductive foreign objects such as liquids, metal powders, etc. do not enter the connection part of the charger.
- Do not place credit cards or other information storage media near the wireless charger. Storage information may be damaged.
- Do not place the product near the stove.
- If the ambient temperature is higher than 30 * C, the charging time may increase.
- If there are coins and other metal substances between the wireless charger and the phone, charging may be interrupted.
- Metal materials may become hot during the filling process.
- There is a risk of overheating and catching fire when overcharging with foreign objects such as metals and magnets
- When wearing a thick shell and charging, it may not be possible to charge. Please be aware.
PRODUCT PARAMETERS
5inl Triangular bracket wireless charging| 5inl Triangular bracket wireless
charging
---|---
Input| 9V 3A /12V 3A
Output| 5W/7.5W/10W/1 5W(Max)
Bluetooth headset| 3W(Smartphones charging can support up to 15W)
Watch| 3W
Interface| Type-C input
Material quality| Wrapping process+oil injection+CD pattern+PET lamp
Product model| YLF-S01
Producer| Made in China
FCC WARNING
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
timits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidetines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>