COSTWAY EP23880 Dual 10 Inch 1600W Powered Bluetooth Mic Speaker User Manual
- June 6, 2024
- COSTWAY
Table of Contents
USER’S MANUAL
SPEAKER BOX
EP23880
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP IT
FOR FUTURE REFERENCE.
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order. We
recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
**** Always place the product on a flat, steady, and stable surface. Keep all
small parts and packaging materials for this product away from babies and
children as they potentially pose a serious choking hazard.
- CAUTION, TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER IOR BACK
- THIS PRODUCT MUST BE EARTHED
- NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
OPERATION
- Prior to switching it on, turn the volume down to a minimum.
- Connect the audio source to the appropriate input socket.
- Another Speaker can be connected to the output socket so that several boxes can be daisy-chained.
- Connect to the mains supply.
- Switch on the audio source, followed by the active speaker.
- Set the volume with the applicable control.
- Adjust the bass + treble.
INSTRUCTIONS
- Do not overload the box to avoid damage to the speakers.
- Do not place an open fire (candles etc) on top or next to the box – FIRE HAZARD
- Only connect to an earthed mains outlet of 110/220v AC/60-50Hz.
- For indoor use only. If the box is used outdoors, you need to make sure that no humidity can enter the box.
- When not in use, unplug the unit from the mains.
- Unplug the unit from the mains prior to checking or replacing the fuse.
- Make sure that the box is placed on a stable, strong surface.
- The boxes can be hung. Use only strong and approved mounting material. During the mounting, make sure that nobody is standing below the mounting area.
- Do not place liquids on the box and protect it against humidity. Humidity can shorten the lifetime considerably.
- Only use suitable means of transportation if you want to move the box – BEWARE OF YOUR BACK !!
- Always unplug the unit during a thunderstorm or when it is not in use.
- If the unit has not been used for a long period of time, condensation can occur inside the housing. Please let the unit reach room temperature prior to use.
- Never try to repair the unit yourself. It does not contain any user-serviceable parts.
- Run the mains lead in such a way that nobody can fall over it and nothing can be put in it.
- Set the unit to the lowest volume prior to switching it on.
- Keep the unit out of the reach of children.
SPECIFICATIONS
| 10″Speaker box
---|---
System| Active 2-way full range
Woofer| 10″
Tweeter| 1″
Peak Power| 1600W
RMS power| 150W
Impedance| 8 ohm
Frequency Range| 60Hz-18KHz
Sensitivity| 98dB (+/- 2dB)
Connector| XLR/6.35mm/RCA
Mic Input Level| <5mV
Line Input/Output Level| 250mV
Voltage| 110/220v AC/60-50Hz
- 6.35mm microphone(unbalanced)input
- Mic input level control
- RCA phono line inputs
- XLR line input
- Line input level control
- 6.35mm line output(unbalanced)
- Treble control for high frequencies
- Bass control for low frequencies
- Clip LED indicator
- Power LED indicator
- Fused IEC mains inlet
- Mains power switch
- USB input
- SD Card
- LCD screen
- MP3 player control
- MP3 input level control
- 110/220V switch
- Speaker out 8 ohm
Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP!
** office: Fontana
office: Ipswich**
Contact Us!
Do NOT return this item. Contact our friendly customer service department for
help first.
US:[email protected]
UK:[email protected]
AU:[email protected]
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure InformationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.