Philips AVENT SCD630 Baby Monitor Quick Start Guide

Philips AVENT SCD630 Baby Monitor

Always here to help you

Register your product and get support at www.philips.com/welcome

Box Contents

Preparing for use

1. Charging the Parent Unit:
   • Plug in the parent unit into a power source. The unit should be charged until the light turns on.
   • The parent unit with a red light indicates that the battery is low and needs to be charged.
2. Powering the Parent Unit:
   • Plug the charger into the parent unit to charge it. This is a common step to ensure the device is powered and ready for use.
3. Battery Charging and Duration:
   • Charging the unit for 3 hours will provide up to 10 hours of operating time. This is a typical ratio for rechargeable batteries, where a certain amount of charging time gives you a longer usage time.
   • A green light on the parent unit indicates that the unit is charged and has power.

Turning the Unit On and Off:

1. To turn the parent unit on, press the power button (marked with a circle and line at the top of the unit).
   • When the unit is on, a green light will be visible to indicate it’s ready to use.
2. To turn the unit off, press the power button again.

Battery and Connection Status:

1. A red light on the parent unit indicates that the battery is low and needs to be charged.
2. A green light signifies that the parent unit is connected to the baby unit and is functioning properly.
3. A red light with an exclamation mark indicates that the parent unit has lost connection with the baby unit or is out of range.

Placement and Range:

1. Place the baby unit at least 1 meter (3.3 feet) away from the baby’s crib for safety and best performance.
2. The parent unit has an indoor range of up to 50 meters (165 feet) and an outdoor range of up to 300 meters (985 feet).

Mounting and Safety Precautions:

1. The baby unit can be mounted on a wall for a better view of the baby.
2. Keep both units away from water to avoid damage or hazards.
3. The baby unit’s camera can be rotated to adjust the viewing angle as needed.

Adjusting Volume

1. Volume Adjustment:
   • Press the volume up button (indicated by a plus sign) to increase the volume of the audio on the parent unit.
   • The volume level is indicated on the screen with ascending bars. More bars mean a higher volume.

Activating Vibration Alert

1. Activating Vibration:
   • Press and hold the volume down button (indicated by a minus sign) until the vibration symbol appears on the screen.
   • When the vibration symbol is displayed, the parent unit will vibrate in addition to playing the audio when noise is detected from the baby unit.

Selecting Modes

Video Mode:

1. Press the ‘VIDEO’ button on the parent unit to activate the video function.
2. The screen will display the video feed from the baby unit.
3. The video signal indicator on the top of the screen will show the strength of the connection.

Audio Mode:

1. Press the ‘AUDIO’ button to switch to audio-only monitoring.
2. The screen will turn off to indicate that the monitor is in audio mode.
3. The audio signal indicator will light up to show the connection strength and that audio monitoring is active.

VOX Mode:

1. Press the ‘VOX’ button to enable voice-activated monitoring, where the unit transmits audio only when a sound is detected.
2. The screen will display a standby state, indicating that the video is off while the unit is listening for noise.
3. When noise is detected, the audio signal indicator lights will illuminate, and the unit will transmit audio from the baby unit.

ECO Mode:

1. Press the ‘ECO’ button to activate the energy-saving mode.
2. The screen will show the ‘ECO’ symbol to indicate that this mode is active.
3. In ECO mode, the connection is reduced to save power, but the unit will still monitor and indicate when noise is detected.

Using the Nightlight Feature

1. To turn on the nightlight on the baby unit, press the light bulb button.
2. The nightlight on the baby unit will emit a soft glow, indicated by the yellow light on the illustration.

Playing Lullabies

1. To start playing lullabies on the baby unit, press the musical note button on the parent unit.

2. On the parent unit’s screen, select from a list of lullabies. The lullabies available are:

   • Rock-a-Bye Baby
   • Twinkle, Twinkle
   • Hush, Little Baby
   • Brahms’ Lullaby
   • Golden Slumbers

3. You can set a timer for how long the lullabies play by pressing the timer button on the parent unit. The example shows setting it for 15 minutes.

4. Adjust the volume of the lullaby by pressing the volume up or down buttons on the parent unit.

Using the Talk-Back Feature:

1. Press and hold the microphone button on the parent unit to start speaking.
2. Speak into the parent unit, and your voice will be transmitted to the baby unit.
3. Release the microphone button when finished speaking to listen for sounds from the baby’s room again.

Carrying the Parent Unit:

1. Clip the parent unit to your belt or waistband for easy portability.

Using Menu and Navigation:

1. Press the menu button to access the monitor’s menu options.
2. Use the navigation keys to scroll through the menu options.

Using the Zoom and Navigation Feature:

1. To activate the zoom function, go to the menu and select ‘Zoom’.
2. You can choose to turn the zoom ‘On’ or ‘Off’.
3. If zoom is on, you can then use the navigation keys to pan around the zoomed image.

Adjusting Sound Sensitivity:

1. In the menu, select the ‘Sensitivity’ option to adjust the sound sensitivity level of the baby unit.
2. Choose from four sensitivity levels: Low, Medium, High, or Very High, depending on how sensitive you want the baby monitor to be to the sounds in the baby’s room.

Setting Vibration Alerts:

1. To adjust vibration alerts, navigate to the ‘Vibrate’ setting in the menu.
2. You have the options to set the vibration to:
   • ‘Always on’ which means the unit will vibrate for alerts regardless of sound settings.
   • ‘On if speaker is off’ which means the unit will vibrate only when the speaker is turned off.
   • ‘Off’ which disables the vibration alert.

Setting Temperature Alerts:

1. In the menu, go to the ‘Temperature’ setting.
2. You can select the temperature unit (Celsius or Fahrenheit).
3. Set the maximum (Max) and minimum (Min) temperature thresholds.
4. Toggle the ‘Alert’ option to ‘On’ to receive alerts when the room temperature goes beyond the set thresholds.

Selecting Language:

1. To change the language, navigate to the ‘Language’ setting in the menu.
2. Choose between the available languages (e.g., English, Deutsch, Français) by highlighting your preferred language and confirming your selection.

Cleaning and Maintenance

1. Do not wash any part of the baby monitor under running water or immerse it in water.
2. Do not use cleaning sprays or solvents on the baby monitor.

For Charging the Baby Monitor:

1. Connect the smaller end of the power cable to the baby or parent unit.
2. Plug the larger end of the power cable into an electrical outlet.

For Battery Installation: The second image appears to show a diagram for battery installation, likely for the baby unit of the monitor:

1. Place the rechargeable battery in the battery compartment, ensuring the contacts align with the terminals.
2. Close the compartment, securing the battery inside the unit.

www.philips.com/avent

Philips Consumer Lifestyle BV

• Tussendiepen 4, 9206 AD Drachten, The Netherlands
• Trademarks owned by the Philips Group.
• ©2016 Koninklijke Philips N.V. All rights reserved
• www.philips.com
• 4213.355.5058.5
• 4213.355.5058.5_cHR.indd 12
• 31-03-16 16:52

Frequently Asked Questions

How do I charge the parent unit of the Philips AVENT SCD630 Baby Monitor?

Plug the parent unit into a power source using the provided cable. Charge until the light turns on, indicating a full charge. A red light means the battery is low.

How long does the battery of AVENT SCD630 last on a single charge?

Charging the parent unit for 3 hours provides up to 10 hours of operating time.

How do I turn the parent unit of AVENT SCD630 on and off?

Press the power button on the parent unit to turn it on (a green light will appear). Press the power button again to turn it off.

What does a red light with an exclamation mark mean on the parent unit?

This indicates that the parent unit has lost connection with the baby unit or is out of range.

How far can the parent unit be from the AVENT SCD630 baby unit and still function?

The parent unit can operate up to 50 meters (165 feet) indoors and up to 300 meters (985 feet) outdoors.

Can the AVENT SCD630 baby unit be mounted on a wall?

Yes, the baby unit can be wall-mounted for better viewing angles. Make sure it is at least 1 meter (3.3 feet) away from the crib for safety.

How can I adjust the volume on the parent unit of AVENT SCD630?

Press the volume up (+) button to increase volume. The screen will show ascending bars as the volume increases.

What is the vibration alert feature in AVENT SCD630 and how do I activate it?

The vibration alert notifies you with vibrations when noise is detected. Press and hold the volume down (-) button until the vibration symbol appears on the screen.

How do I activate and use different monitoring modes like Video, Audio, VOX, and ECO in AVENT SCD630?

Press the respective buttons on the parent unit to activate the desired mode. 'VIDEO' for visual monitoring, 'AUDIO' for audio-only, 'VOX' for voice activation, and 'ECO' for an energy-saving connection.

How do I play lullabies on the baby unit?

Press the musical note button on the parent unit and select a lullaby. You can set a timer and adjust the volume as needed.

Can I talk to my baby through the AVENT SCD630 monitor?

Yes, the talk-back feature allows you to speak to your baby. Press and hold the microphone button on the parent unit to talk, and release it to listen.

What are the guidelines for cleaning the AVENT SCD630 baby monitor?

Avoid washing any part of the monitor under running water or using cleaning sprays. Wipe with a dry cloth.

Reference:Philips AVENT SCD630 Baby Monitor Quick Start Guide- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>