StarTech Com PEX4SFF8639 U.2 (SFF-8639) Drive to PCIe Host Adapter User Manual
- June 4, 2024
- StarTech com
Table of Contents
StarTech Com PEX4SFF8639 U.2 (SFF-8639) Drive to PCIe Host Adapter
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to
StarTech.com. Where they occur these references are for illustrative purposes
only and do not represent an endorsement of a product or service by
StarTech.com, or an endorsement of the product(s) to which this manual applies
by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and
other protected names and/or symbols contained in this manual and related
documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United
States or other countries.
Introduction
Product diagram
Top views
Application image
Application image (underside)
Package contents
- 1 x drive adapter card
- 4 x drive-mounting screws
- 1 x quick-start guide
Requirements
- Computer or server enabled with PCI Express and an available PCIe x4, x8, or x16 slot
- Phillips screwdriver
- U.2 compatible SSD
The PEX4SFF8639 is OS independent and doesn’t require any additional drivers
or software.
Note: To determine if the drive and motherboard that you’re using are
compatible, consult the technical specifications that came with the drive and
motherboard.
System requirements are subject to change. For the latest requirements, please
visit www.StarTech.com/PEX4SFF8639.
Connect an SSD to the adapter card
Warning! Drives should be handled carefully, especially when you transport them. If you’re not careful with your drives, you may experience lost or corrupted data. Make sure that you’re properly grounded by wearing an anti-static strap when you install any computer component. If an anti-static strap isn’t available, touch a large, grounded metal surface for several seconds to discharge any built-up static electricity.
- Carefully slide the SSD into the drive adapter card and connect it to the SFF-8639 connector on the card.
- Turn the drive adapter card over.
- Use a Phillips screwdriver and insert the four drive-mounting screws into the mounting holes on the drive adapter card and into the SSD.
- Tighten the screws.
Install the adapter card
Warning! PC components can be severely damaged by static electricity. If an anti-static strap isn’t available, discharge any built-up static electricity by touching a large, grounded metal surface for several seconds.
-
Turn off your computer and any devices or peripherals that are connected to it (for example, printers, external storage, and so on).
-
Unplug the power cable from the back of your computer.
-
Disconnect any peripheral devices that are connected to your computer.
-
Open your computer case. For more information about how to do this, consult the documentation that came with your computer system.
-
Locate an open PCIe slot and remove the corresponding metal cover plate from the back of your computer case. Consult the documentation that came with your computer system for detailed instructions about how to do this.
Note: This drive adapter card works in PCIe slots of x4, x8, or x16 lanes. -
Gently insert the drive adapter card into the open PCIe slot and use a computer case screw (not included) to fasten the bracket to the back of the case.
-
Place the cover back onto your computer case.
-
Reconnect the power cable to the back of your computer and reconnect all of the peripheral devices that you disconnected in step 3.
-
Turn on your computer.
Note: By default E4 and CLKREQ will be connected via a jumper on the CLKREQ pin header, however early PCI Express SFF-8639 Revision 1 drives may require the jumper to be moved to CLKREQ and P3 in order to function.
There may be additional steps required to enable drive functionality, such as installing drivers or updating the firmware for the drive or motherboard. For more information, consult the documentation that came with the drive or motherboard.
About the LED terminal
You can connect an LED (not included) to the LED terminal on the drive adapter card. The LED terminal generates an activity LED, but the exact behavior of the LED indicator is dependent upon the SSD connected to the drive adapter card.
Technical support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need help with
your product, visit
www.startech.com/support and access our
comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit
www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and
workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement
with equivalent products at our discretion. The warranty covers parts and
labor costs only. StarTech.com does not warrant its products from defects or
damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
- Hard-to-find made easy. At StarTech.com, that isn’t a slogan.
- It’s a promise.
- StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions.
- We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time.
- Visit www.startech.com for complete information on all StarTech.com products and to access exclusive resources and time-saving tools.
- StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United
- Kingdom and Taiwan service a worldwide market.
Reviews
Share your experiences using StarTech.com products, including product applications and setup, what you love about the products, and areas for improvement.
StarTech.com Ltd. 45 Artisans Crescent London, Ontario N5V 5E9 Canada
StarTech.com LLP 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.
StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton
NN4 7BW United Kingdom
StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands
- FR: fr.startech.com
- DE : de.startech.com
- ES : es.startech.com
- NL : nl.startech.com
- IT: it.startech.com
- JP: jp.startech.com
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
References
- StarTech.com | IT Pro's Trusted Source for Connectivity Accessories | Europe
- Drivers & Downloads | StarTech.com Support
- Adapter, U.2 to PCIe - 2.5' U.2 NVMe SSD - Drive Adapters and Drive Converters
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>