avlink 952.301UK Electric Tab Tensioned Projector Screen User Manual
- June 15, 2024
- AVLINK
Table of Contents
952.301UK Electric Tab Tensioned Projector Screen
ESTT Series
Electric Tab-Tensioned Projector Screen
User Manual
Professional quality electric screens fitted with an elastic tightening system
designed to balance the surface tension making the viewing area smooth and
wrinkle free. Housed in a rugged iron casing and fitted with a reliable
synchronous motor, the soft white PVC screen surface with black border
provides the perfect projection area for high definition and 4K images. Fitted
with sturdy top/side mounting brackets and IEC mains connections on either end
making installation a breeze. Supplied with a sleek RF remote providing total
control from anywhere in the room.
CAUTION!
Please read through this manual carefully before use. This product is strictly
for indoor use only, please install this product in a dry, cool environment
and away from sources of heat.
Features:
- Fitted with an elastic tightening system designed to balance the surface tension making the viewing area smooth and wrinkle free.
- Soft white PVC screen material with black border which enhances the definition of the projected image.
- Rugged iron casing and low noise synchronous electric motor.
- Handy IEC sockets on either end and sturdy top/side mounting brackets for simple wall or ceiling installation.
- RF remote control included.
Installation:
Before installation, please ensure a mains socket is available within 1.5m
distance of your desired location and ensure the unit is not plugged in. This
electric projector screen is suitable for both wall and ceiling mounting, it
is important the unit is installed accurately using a spirit level to ensure
the screen can operate correctly & safely.
Warning: Once the unit is connected to power it’s essential the
unconnected IEC socket on the opposite end remains isolated with the plastic
safety cover to avoid risk of electric shock.
Wall Mounting
Ceiling Mounting
Screen drop adjustment:
All electric projector screens will be pre-adjusted before delivery. If adjustment is needed to suit your application, please ensure the unit is switched off before you proceed. The drop adjusting screws are located at the left-hand end of the projector screen (see diagram A below). A screen drop adjusting tool is included for the adjustment. Two separate-coloured screws set the open and close positions and need to be turned toadjust the limits according to the below diagram B.
Remote control:
This projector screen is supplied with an RF remote control for simple operation as described below:
- Screen upwards movement
- Stop movement
- Screen downward movement
Maintenance:
Maintenance and service of the unit should not be required throughout the duty life of the product. We recommend dusting on a regular basis using a dry microfiber cloth. To remove any stains on the screen surface, use a slightly damp microfiber cloth with max. 5% soap solution. Always ensure the surface is completely dry before closing the screen.
Please do not open the cover as it contains high voltage.
This product is not serviceable or repairable by the end user.
Please contact an approved professional in case product fails to
operate.
This product is classed as Electrical or Electronic equipment and should not
be disposed with other household or commercial waste at the end of its useful
life. The goods must be disposed of according to your local council
guidelines.
Errors and omissions excepted.
Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park
Taylor Road, Trafford Park, Manchester. M41 7JQ.
AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.
952.301UK User Manual
Documents / Resources
|
avlink 952.301UK Electric Tab Tensioned Projector
Screen
[pdf] User Manual
952.301UK, 952.301UK Electric Tab Tensioned Projector Screen, 952.301UK,
Electric Tab Tensioned Projector Screen, Tensioned Projector Screen, Projector
Screen, Screen
---|---