Avlink Industrial PODS 01 Active Noise Cancelling Earbuds Instructions
- June 5, 2024
- Avlink Industrial
Table of Contents
Av link Industrial PODS 01 Active Noise Cancelling Earbuds
packing list
Thanks for ordering PODS O1 earbuds. To connect with your devices, please follow the quick steps here to set up
Technical Specs
- Bluetooth version: V5.1
- Working range: >10m
- Speaker: 12mm
- Frequency: 2.4-2.48G
- Battery capacity: 40mA
- Battery life: 4H
- Battery case: 730mA
- Charging: 5V
- Charging port: Type C
- Wireless charging: Supported
-
Turn on Bluetooth from your device.
-
Connect with PODS 01.Long press both earbuds for 5 seconds to turn on PODS 01 and enter pairing mode. Search and select PODS 01 from your device and connect.
-
Power on.
When powered off, long press the earbuds for 3 seconds to turn on the power.
Power off.
When powered on, long presS the earbuds for 5 seconds to turn on the power. -
Press to Play/Pause.
Double-press the left earbud to skip back.
Double-press the right earbud to skip forward. -
ANC mode.
Long-press either earbuds for 2 Seconds to enter or deactivate ANC mode.
Gaming mode.
Press either earbud 4 times to enter or deactivate the GamingMode.
Note: Working range and battery life will be slightly reduced under gaming mode. -
When phone call comes in: Press either earbuds once to answer a call.
Double-press either earbuds to reject or hang off the phone call. -
Reset default settings. Press both earbuds for 7 times to reset.
Activate voice assistant. When paired, triple-press either earbuds to activate the voice assistant on your phone. -
Recharge PODS 01.
The red light is on when the battery is under 30%.
Yellow light is on when the battery is between 30% to 60%.
Greenlight is on when the battery is over 60%.
Lights off under 100% battery capacity.
Safety Alert
- Please read the following guides carefully before using:
- Please charge the headset at its suggested voltages and currents.
- do not start with a high volume for many extended period.
- To reduce any risk of electrical shock, do not expose the device to rain or liquid, it’s not waterproof.
- Do not expose the device nearby fire or excessive heat.
- Do not use the headset to emit loud unusual noise.
- Do not open the device, there is no user serviceable parts and this will invalidate your warranty.
- Choke alert. This device contains small parts and is not suitable for children under age 3.
FCC Rules
tnis device complies With Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
receved, including interference that may cause undesired Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
NOTE This equipment has been tested and found to comply with the limits for a CiasS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmtul interference in a residential installation. Ihis equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/T technician for help.
his device and its antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement the device has been evaluated to meet general RF
exposure requirements in portable exposure condition without restriction.