avlink EMBT1 Metallic Magnetic Bluetooth Earphones User Manual
- June 6, 2024
- AVLINK
Table of Contents
avlink EMBT1 Metallic Magnetic Bluetooth Earphones
These stylish metallic Bluetooth earphones provide both great sound performance and practicality with their magnetic earbuds and tangle free ribbon cable. Connect to your smart device via Bluetooth and enjoy up to 5 hours of listening from a single charge. An in-line hands-free microphone and volume/track control gives you the ability to listen to and take control of your favourite tunes or make and receive calls on the move. There are 4 modern colour schemes to choose from, which match the latest smartphone designs. To keep your headphones looking like new a hard-shell carry case is also provided.
Features
- Bluetooth v4.1 Airhoa chipset with multi-point support allowing you to connect 2 devices at the same time.
- Operating distance of up to 10m providing freedom of movement.
- Magnetic earbuds and flat ribbon-style cable for tangle free storage.
- In-line hands-free microphone and volume/track controls.
- 85mAh Lithium rechargeable battery providing up to 5 hours usage from a single charge.
- Supplied with hard-shell carry case, USB charging lead and 3 sizes of earbud
- Fully compatible with iOS and Android devices
Technical Specifications
| Speaker Driver | 10mmØ |
|---|---|
| Sensitivity | 98db±3db |
| Impedance | 32 Ohms±15% |
| Frequency Response | 20hz-20khz |
| Bluetooth Version | 4.1 |
| Bluetooth Range | Up to 10m (clear line of sight) |
| Power Supply | Internal rechargeable 85mAh Lithium Ion battery |
| Charge Time | 2 Hours |
| Battery Life: Bluetooth Playback | Up to 5 hours |
| Weight: | 7.6g |
Overview
Powering on/off:
Press and hold the MF button until the blue light blinks and the voice message
“power on” is heard. To power off, press and hold the MF button until a red
light blinks and the voice message “power off” is heard.
Pairing with your device:
Press and hold the MF button until alternating blue and red lights blink and
the voice message “pairing” is heard. Select the Bluetooth pairing name
“AV:Link EMBT1” in your device list and when connected a voice message saying
“pairing successful, connected” can be heard. if your device asks for a
pairing code the default setting for these earphones is 0000.
Volume up/next track:
Short press the (+) button to move the unit volume up and press and hold the
(+) button to move onto the next track.
Volume down/previous track:
Short press the (-) button to move the unit volume down, press and hold the
(-) button to go back to the previous track.
Play/pause:
Short press the MF button to play and pause your current track.
Hands-free operation:
When you receive an incoming call the voice message “incoming call” will be
heard and the voice will then tell you the number of who is calling. To accept
the call, press the MF button once or to reject it press the MF button twice.
Once you have completed your call, press the MF button once to hang up. To
dial the last number stored on your phone, press the MF button twice either
when listening to music or in standby mode.
Charging the device:
To charge the device only use the USB cable supplied and make sure that the
headphones are switched off. Whilst charging a red light will be on, which
will turn blue when they are fully charged. Charging time is normally around 2
hours from flat and the device will give up to 5 hours of playback time from a
single charge.
In the Box
- Bluetooth magnetic earphones 1pc
- USB charging cable 1pc
- Hard-shell carry case 1pc
- Spare silicone buds 2 pairs (small and large)
- User guide 1pc
FAQ
Q) Bluetooth headphones cannot pair with device.
A) Check that the headphones are in pairing mode and that the Bluetooth mode
is enabled on your device and in scan mode.
Q) Bluetooth headphones disconnect with my device well within the stated
10m transmission distance.
A) The maximum transmission distance stated is dependent on a clear line of
sight between the headphones and your device. If there are large metallic
objects or other devices transmitting radio or wireless signals in the
vicinity, they can impact on the reception of the headphones.
Q) Bluetooth headphones won’t switch on.
A) Check that the headphones are fully charged before operation.
Q) Bluetooth headphones won’t connect to my PC.
A) Please check that your PC supports the A2DP Bluetooth profile.
Safety Disclaimer
Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock or equipment damage and will also invalidate the warranty. This product is only designed for indoor use and must be kept away from water and high humidity along with high temperatures and direct sunlight.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Hereby, AVSL Group Ltd. declares that the radio equipment type:
100.540UK/100.541UK/100.542UK/100.543UK complies with Directive 2014/53/EU
The full text of the EU declaration of conformity for 100.540UK is available
at the following internet address:
www.avsl.com/assets/doc/1/0/100540UK.pdf
The full text of the EU declaration of conformity for 100.541UK is available
at the following internet address:
www.avsl.com/assets/doc/1/0/100541UK.pdf
The full text of the EU declaration of conformity for 100.542UK is available
at the following internet address:
www.avsl.com/assets/doc/1/0/100542UK.pdf
The full text of the EU declaration of conformity for 100.543UK is available
at the following internet address:
www.avsl.com/assets/doc/1/0/100543UK.pdf
Errors and omissions excepted.
Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford
Park, Manchester. M41 7JQ.
www.avsl.com.
AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.