Schneider Electric CCT15285 Industrial Automation Partner User Manual

June 4, 2024
Schneider Electric

Schneider Electric CCT15285 Industrial Automation Partner

Schneider-Electric-CCT15285-Industrial-Automation-Partner-
product

FEATURE

For your safety

DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION,
OR ARC FLASH
Safe electrical installation must be carried out only by skilled professionals. Skilled professionals must prove profound knowledge in the following areas:

  • Connecting to installation networks
  • Connecting several electrical devices
  • Laying electric cables
  • Safety standards, local wiring rules and regulations

Failure to follow these instructions will result in death or serious injury

Getting to know the twilight switch

The twilight switch is used for controlling the light facilities of streets, external stairways, shop windows, entrances etc. It has an integrated delay (ON approx. 20 sec., OFF approx. 80 sec.) to avoid undesired switching. The sensor is intended for indoor installation

Mounting, Setup and Operating

Mounting:

Wiring:

No safe electrical isolation between the power supply and the light sensor!

Connect light sensor only with approved cable for mains voltage

Operating

  • Red LED: Brightness is lower than the set lux value
  • Green LED: Relay contact is closed.
  • Set switching brightness 2-2000 lx.

Technical data

  • Operating voltage: AC 230 V, +10% / -15%, 50/60 Hz
  • Power consumption: 0.3 W
  • Rated impulse voltage: 4 kV
  • Brightness setting range: 2-2000 lx
  • Switching output: Switching of choice of phase is permitted. SELV is not permitted.
  • Switching capacity: 16 A, AC 250 V, cos ϕ = 1 10 A, AC 250 V, cos ϕ = 0.6
  • Switching capacity fluorescent lamps: 10 AX
  • Min. switching capacity: 10 mA, AC 230 V 100 mA, AC/DC 24 V
  • Type of contact: μ-Contact
  • Operating temperature: -30 °C … +55 °C (device) -40 °C … +70 °C (sensor) +5 °C … +55 °C (LCD display)
  • Protection class: II for designated installation
  • Protection rating: IP 20 (device) IP 66 (sensor frontside) IP 40 (sensor backside, installed)
  • Nominal power: ->

Dispose of the device separately from household waste at an official collection point. Professional recycling protects people and the environment against potential negative effects.

Schneider Electric Industries SAS

If you have technical questions, please contact the Customer Care Centre in your country. Schneider-electric.com/contact

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Schneider Electric User Manuals

Related Manuals