SONICWALL SonicOS 7.1 Diagnostics for Classic Mode User Guide

: June 15, 2024
: SONICWALL

SonicOS 7.1
Diagnostics for Classic Mode
Administration Guide

About SonicOS

This guide is a part of the SonicOS collection of administrative guides that describes how to administer and monitor the SonicWall family of firewalls. SonicOS provides network administrators the management interface, API (Application Program Interface), and the Command Line Interface (CLI) for firewall configuration by setting objects to secure and protect the network services, to manage traffic, and to provide the desired level of network service. This guide focuses on how to configure the diagnostics settings on the SonicWall security appliances.
Working with SonicOS

SonicOS provides a web management interface for configuring, managing, and monitoring the features, policies, security services, connected devices, and threats to your network. SonicOS runs on top of SonicCore, SonicWall’s secure underlying operating system.
The SonicOS management interface facilitates:

Setting up and configuring your firewall
Configuring external devices like access points or switches
Configuring networks and external system options that connect to your firewall
Defining objects and policies for protection
Monitoring the health and status of the security appliance, network, users, and connections
Monitoring traffic, users, and threats
Investigating events

SonicWall offers two different modes of operation in SonicOS; the modes differ mainly in the areas of policy, object configuration and diagnostics.

Policy Mode provides a unified policy configuration work flow. It combines Layer 3 to Layer 7 policy enforcement for security policies and optimizes the work flow for other policy types. This unified policy work flow gathers many security settings into one place, which were previously configured on different pages of the management interface.
Classic Mode is more consistent with earlier releases of SonicOS; you need to develop individual policies and actions for specific security services. The Classic Mode has a redesigned interface.

This table identifies which modes can be used on the different SonicWall firewalls:

Firewall Type	Classic Mode	Policy Mode	Comments
TZ Series	yes	no	The entry level TZ Series, also known as desktop

firewalls, deliver revamped features such as 5G readiness, better connectivity options, improved threat, SSL and decryption performance that address HTPPS bandwidth issues; built-in SDWAN, and lawful TLS 1.3 decryption support.
NSa Series| yes| no| NSa firewalls provide your mid sized network with enhanced security . They are designed specifically for businesses with 250 and up. it can provide cloud-based and on-box capabilities like TLS/SSL decryption and inspection, application intelligence and control, SD-WAN, real-time visualization, and WLAN management.
NSsp 10700, NSsp 11700,
NSsp 13700| yes| no| The NSsp platforms high-end firewalls that deliver the advanced threat protection and fast speeds that large enterprises, data centers, and service providers need.
NSsp 15700| no| yes| The NSsp 15700 is designed for large distributed enterprises, data centers, government agencies and services providers. It provides advanced threat protection like Real-Time Deep Memory Inspection, multi-instance firewall configuration, and unified policy creation and modification, with scalability and availability.
NSv Series| yes| yes| The NSv series firewalls offers all the security advantages of a physical firewall with the operational and economic benefits of virtualization. The NSv firewalls can operate in either Policy Mode or Classic Mode. You can switch between modes, but some configuration information from extra interfaces is removed.

In addition to the management interface, SonicOS also has a full-featured API and a CLI to manage the firewalls. For more information, refer to:

SonicOS Workflow
When working with SonicWall products, you can use the following workflow as a guide for setting up your security solution. SONICWALL SonicOS 7.1
Diagnostics for Classic Mode - SonicOS Workflow

You begin your planning as you start making your purchasing decisions. Your sales partners can help you assess your network and make recommendations based on the kinds of security services you need. You can learn more about SonicWall products by reviewing Technical Documentation – SonicWall and Technical Documentation – SonicWall. After selecting the solution, you can schedule your implementation.
After planning and scheduling your solution, you begin setting up the firewalls. The Technical Documentation – SonicWall for your products can help you begin setting up the pieces to your solution. The getting started guides are designed to help you install the firewall to a minimal level of operation. Before performing any detailed configuration tasks described in the SonicOS Administration Guides, you should have your firewall set up and basic operation validated.
The configuration block of the workflow refers to the many tasks that combine to define how your firewall is integrated into your security solution and how it behaves when protecting your environment. Depending on the features of your security solution, this task can be quite complex. The System Administration Guides are broken into the key command sets and features. Some documents may be used for all solutions, but others may be used use only if you integrated that feature into your solution. For example, High Availability or Wireless Access Points are not necessarily used by all customers. More information about a feature’s workflow is presented in the feature administration guide. Refer to the Technical Documentation – SonicWall for more information.
Configuration tends to be a one-time activity, although you might make minor adjustments after monitoring performance or after diagnosing an issue. The configuration activity can be broken down into the more detailed flow as the following figure shows. This also mirrors the key functions that are listed across the top of the management interface. SONICWALL SonicOS 7.1 Diagnostics
for Classic Mode - SonicOS Workflow 1

There is some flexibility in the order in which you do things, but this is the general work-flow you would follow when configuring your firewall. Start by defining the settings on the firewall. Next you set up the system and other devices that your firewall is connected to, and you can choose to implement High Availability when done. After your device, network, and system is configured, you should define the objects that you want to monitor. Then you use those objects to define the policies that protect your network. The final step to preparing your setup is to validate the user authentication.

How to Use the SonicOS Administration Guides
The SonicOS Administration Guide is a collection of guides that detail the features represented by each of the main menu items in the management interface. Within each guide, you can find topics covering commands in that menu group, along with procedures and in-depth information. The exceptions are the SonicOS 7.1 Monitor Guide and the SonicOS 7.1 Objects Guide which combine the topics for each of those functions into a single book.
To help you understand how the books align with the features and commands, the following figure shows the books organized like the SonicWall management interface. SONICWALL SonicOS 7.1 Diagnostics for Classic Mode -
Administration Guides The SonicOS Administration Guides, along with related documentation, such as the getting started guides, are available on the https://www.sonicwall.com/support/technical-documentation/.

Guide Conventions
These text conventions are used in this guide:
NOTE: A NOTE icon indicates supporting information.
IMPORTANT: An IMPORTANT icon indicates supporting information.
TIP: A TIP icon indicates helpful information.
CAUTION: A CAUTION icon indicates potential damage to hardware or loss of data if instructions
are not followed.
WARNING: A WARNING icon indicates a potential for property damage, personal injury, or death.

Convention	Description
Bold text	Used in procedures to identify elements in the management interface

like dialog boxes, windows, screen names, messages, and buttons. Also
used for file names and text or values you are being instructed to select or type into the interface.
Function | Menu group >
Menu item| Indicates a multiple step menu choice on the user interface. For example, NETWORK | System > Interfaces means to select the NETWORK functions at the top of the window, then click on System in the left navigation menu to open the menu group (if needed) and select Interfaces to display the page.
Code| Indicates sample computer programming code. If bold, it represents text to be typed in the command line interface.

| Represents a variable name. The variable name and angle brackets need to be replaced with an actual value. For example in the segment serialnumber=, replace the variable and brackets with the serial number from your device, such as serialnumber=2CB8ED000004. Italics| Indicates the name of a technical manual. Also indicates emphasis on certain words in a sentence, such as the first instance of a significant term or concept.

Introduction to Diagnostics for Classic Mode

This administration guide provides information about the SonicOS Diagnostics feature for the Classic Mode.
Diagnostic tools allow the administrator to test connectivity by performing a Ping, TCP connection test, DNS lookup, reverse lookup, and trace route for a specific IP address or web site. Other Diagnostics for Classic Mode tools provide a way to view or monitor the Geo and Botnet, the MX Banner, GRID result, PMTU Discovery, and other features.
The following comparison table gives the Diagnostics features available for SonicOS Classic Mode and Policy Mode:

Diagnostic Tools Features	SonicOS 7 Classic Mode	SonicOS 7 Policy Mode
Tech Support Report	Available	Available
Check Network Settings	Available	Available
DNS Name Lookup	Available	Available
Network Path	Available	Available
Ping	Available	Available
Trace Route	Available	Available
Real-Time Blacklist	Available	Available
Reverse Name lookup	Available	Available
Connection TopX	Available	Not Available
Geo and Botnet	Available	Available
MX and Banner	Available	Not Available
GRID Check	Available	Not Available
URL Rating Request	Available	Available
PMTU Discovery	Available	Available
Switch Diagnostics	Available	Available
Policy Lookup	Not Available	Available

The following comparison table gives the platforms supported:

SonicWall Firewall Model	SonicOS 7 Classic Mode	SonicOS 7 Policy Mode
Hardware Firewalls

NOTE: The Terminal option that was available on Diagnostics menu is now moved to the notification center and no longer appears in the Diagnostics menu. For more information, refer to Terminal.
Navigate to Device > Diagnostics, the various tools available in Diagnostics menu group includes:

Tech Support Report
Check Network Settings
DNS Name Lookup
Network Path
Ping
Trace Route
Real-Time Blacklist
Reverse Name Lookup
Connection TopX
Geo and Botnet
MX and Banner
GRID Check
URL Rating Request
PMTU Discovery
Switch Diagnostics

For Troubleshooting diagnostics tools, refer to the knowledge base articles Troubleshooting and to monitor, refer to the SonicOS 7.1 Monitor Guide

Terminal

Navigate to notification center, click Open SSH terminal session icon to start a SSH Console Window to issue commands directly to the network security appliance.
NOTE: SSH management must be enabled for the interface of the device before a SSH session can be started successfully.
To enable SSH management of the device:

Navigate to Network > Interfaces.
Select the interface for which you want to enable SSH management and click the Edit icon.
In the Management section, click the SSH toggle to activate SSH management of the device (if it is not already enabled).
Click OK.

To start a SSH management session:

Navigate to notification center, click Open SSH terminal session icon.
Click OK when the warning displays with the IP address.
The SSH session will start by requesting the administrator login credentials on SSH Console Window.

NOTE: SSH management must be ON for this interface.

Tech Support Report

The Tech Support Report generates a detailed report of the SonicWall security appliance configuration and status and saves it to the local hard disk using the Download Tech Support Report button. This file can then be emailed to SonicWall Technical Support to help assist with a problem.
NOTE: You must register your SonicWall security appliance on MySonicWall to receive technical support.
Completing a Tech Support Request
Before emailing the Tech Support Report to the SonicWall Technical Support team, complete a Tech Support Request Form at https://www.mysonicwall.com. After the form is submitted, a unique case number is returned. Include this case number in all correspondence, as it allows SonicWall Technical Support to provide you with better service.
Generating a Tech Support Report SONICWALL SonicOS 7.1 Diagnostics for
Classic Mode - Support Report

Navigate to Device > Diagnostics > Tech Support Report.
In the Tech Support Report section, turn on any of the following report options:
Sensitive Keys ‐ Saves shared secrets, encryption, and authentication keys to the report.
ARP Cache ‐ Saves a table relating IP addresses to the corresponding MAC or physical addresses.
DHCP Bindings ‐ Saves entries from the firewall DHCP server.
IKE Info ‐ Saves current information about active IKE configurations.
List of current users ‐ Lists all currently logged in active local and remote users.
Wireless Diagnostics ‐ Lists log data if the SonicPoint or internal wireless radio experiences a failure and reboots.
DNS Proxy Cache ‐ This option is not selected by default.
Inactive users ‐ Lists the users with inactive sessions. Selected by default.
Detail of users ‐ Lists additional details of user sessions, including timers, privileges, management mode if managing, group memberships, CFS policies, VPN client networks, and other information. The Current users report checkbox must be enabled first to obtain this detailed report.
IP Stack Info ‐ This option is not selected by default.
IPv6 NDP ‐ This option is not selected by default.
IPv6 DHCP ‐ This option is not selected by default.
Geo‐IP/Botnet Cache ‐ Saves the currently cached Geo‐IP and Botnet information.
User Name – Shows user name in the report.
Extra Routing Info – Shows extra routing information in the report.
Capture ATP Cache ‐ Saves the currently cached Capture information.
Vendor Name Resolution ‐ This option is not selected by default.
Debug Info in report ‐ Specifies whether the downloaded TSR is to contain debug information.
IP Report – This option is not selected by default.
ABR Entries – This option is not selected by default.
Application Signatures – Shows application signature information in the report.
Click Accept to save the changes.
Click Download Tech Support Report under the Actions section to save the file to your system.
Click OK to save the file.
Attach the report to your Tech Support Request email.
To send the TSR, system preferences, and trace log to SonicWall Engineering (not to SonicWall Technical Support), click Send Diagnostic Reports to Support under the Actions section. The Status indicator at the bottom of the page displays Please wait! while the report is sent, and then displays Diagnostic reports sent successfully. You would normally do this after talking to Technical Support.
To download the SSO authentication log, click Download SSO Auth Log under the Actions section .
To download system logs, click Download System Logs under the Actions section and then click Confirm.
To send diagnostic files to SonicWall Tech Support for crash analysis, select the Automatic secure crash analysis reporting toggle switch
NOTE: This toggle switch is not applicable for NSsp 15700.
To periodically send the TSR, system preferences, and trace log to MySonicWall for SonicWall Engineering:
a. Select the Periodic secure diagnostic reporting for support purposes switch.
b. Enter the interval in minutes between the periodic reports in the Time Interval (minutes) field. The default is 1440 minutes (24 hours).
c. Enter the interval in minutes between the periodic reports in the CSC Reporting Time Interval (minutes) field. The default is 15 minutes.
NOTE: This toggle switch is not applicable for NSsp 15700.
To include flow table data in the TSR, toggle the switch for Include raw flow table data entries when sending diagnostic report.
NOTE: This toggle switch is not applicable for NSsp 15700.

Check Network Settings

Check Network Settings is a diagnostic feature that automatically checks the network connectivity and service availability of several pre‐defined functional areas of SonicOS, returns the results, and attempts to describe the causes if any exceptions are detected. SONICWALL SonicOS 7.1 Diagnostics for
Classic Mode - Check Network Settings This tool helps you locate the problem area when users encounter a network problem. The feature lists both IPv4 and IPv6 network settings in different tabs.
Specifically, Check Network Settings automatically tests the following functions:

Default Gateway settings
DNS settings
MySonicWall server connectivity
License Manager server connectivity
Content Filter server connectivity

The return data consists of two parts:

Test Results – Provides a summary of the test outcome
Notes – Provides details to help determine the cause if any problems exist

The Check Network Settings feature is dependent on the Network Monitor feature available under Network
Network Monitor view. Whenever the Check Network Settings tool is being executed (except during the Content Filter test), a corresponding Network Monitor Policy appears on the Network | Network Monitor page, with a special diagnostic tool policy name in the form:
diagTestPolicyAuto_<IP_address/Domain_name>_0
Navigate to Device > Diagnostics > Check Network Settings.to use the Check Network Settings tool, first select it in the Diagnostic Tools drop‐down list and then click the Test button in the row for the item that you want to test. The results are displayed in the same row. A green check mark signifies a successful test, and a red X indicates that there is a problem.
To test multiple items at the same time, check the box for each desired item and then click TEST ALL SELECTED.

DNS Name Lookup

The DNS lookup tool returns the IPv4 and IPv6 IP address of a URL. If you enter an IPv4 and/or IPv6 IP address, the tool returns the domain name for that address. If you enter a domain name, the tool returns the DNS server used and the resolved address.
Navigate to Device > Diagnostics > DNS Name Lookup, with the DNS Server radio buttons, you can select either a System or Customized DNS server. The options change, depending on which you choose.
The IPv4/IPv6 DNS Server fields display the IP addresses of the DNS Servers configured on the firewall. If there is no IP address (0.0.0.0 for IPv4 or :: for IPv6) in the fields, you must configure them on the Network > DNS page.
Under Lookup name or IP, enter the URL and select, IPv4, IPv6, or All and click GO.
Resolving a System DNS Server
To resolve a system DNS Server:

Select System for the DNS Server.
In the Lookup name or IP field, enter either the domain name or the IP address.
Select the type of IP address from the drop‐down menu:
IPv4 (default)
IPv6
All
Click GO. The firewall returns the matching pair of addresses and domain names.

IMPORTANT: When specifying a domain name, do not add http or https to the name.

Resolving a Customized DNS Server
To resolve a Customized DNS Server:

Select Customized under DNS Server.
If the DNS Server IP address is not populated, enter it in the IPv4 or IPv6 field.
In the Lookup name or IP field, enter either the domain name or the IP address.
Select the type of IP address from the drop‐down menu:
IPv4 (default)
IPv6
All
Click GO.

Network Path

Enter an IP address to determine the network path of it. The Network Path feature finds if the IP is located on a specific network interface, if it reached a router gateway IP address, and if it reached through an Ethernet address. SONICWALL SonicOS 7.1 Diagnostics for Classic Mode - Customized DNS
Server 1 To find network path of an IP address:

Navigate to Device > Diagnostics > Network Path.
Enter the IP address of the network.
Click GO.

Ping

The Ping test sends a packet off a machine on the Internet and returns it to the sender. This test shows if the firewall is able to contact the remote host. If users on the LAN are having problems accessing services on the Internet, try pinging the DNS server, or another machine at the ISP location. If the test is unsuccessful, try pinging devices outside of the ISP. If you can ping devices outside of the ISP, then the problem lies with the ISP connection. SONICWALL SonicOS 7.1 Diagnostics for Classic Mode -
Ping To ping an IP address:

Navigate to Device > Diagnostics > Ping
Specify the Ping host or IP address of the target device.
Specify the Count.
In the Interface drop‐down menu, select which WAN interface you want to test the ping from. Selecting ANY allows the appliance to choose among all interfaces—including those not listed in the drop‐down.
Toggle Prefer IPv6 Networking switch if you prefer pinging to an IPv6 address.
Click GO.

Trace Route

Trace Route is a diagnostic utility that assists in diagnosing and troubleshooting router connections on the Internet. By using Internet UDP packets similar to Ping packets, Trace Route can test interconnectivity with routers and other hosts that are spread along the network path until the connection fails or until the remote host responds.
Trace Route tool includes a IPv6 networking option. When testing interconnectivity with routers and other hosts, SonicOS uses the first IP address that is returned and shows the actual Trace Route address. If both IPv4 and IPv6 addresses are returned, by default, the firewall checks the IPv4 address. If the Prefer IPv6 Networking option is enabled, the check only IPv6 address. SONICWALL SonicOS 7.1 Diagnostics for Classic Mode - Trace
Route To troubleshoot with Trace Route:

Navigate to Device > Diagnostics > Trace Route.
Type the IP address or domain name of the destination host in the TraceRoute this host or IP address field.
In the Interface drop‐down menu, select which WAN‐specific interface you want to test the trace route from. Selecting ANY, the default, allows the firewall to choose among all interfaces—including those not listed in the drop‐down menu.
To TraceRoute for IPv6, select the Prefer IPv6 Networking checkbox.
Click GO. Depending on the route, this may take a few minutes. A popup table displays with each hop to the destination host. By following the route, you can diagnose where the connection fails between the firewall and its destination.

Real-Time Blacklist

The Real‐Time Blacklist feature allows you to blacklist SMTP IP addresses, RBL services, and DNS servers.![SONICWALL SonicOS 7.1 Diagnostics for Classic Mode

Time Blacklist](https://manuals.plus/wp-content/uploads/2023/12/SONICWALL- SonicOS-7.1-Diagnostics-for-Classic-Mode-Time-Blacklist.jpg) To blacklist an IP address, RBL domain, or a DNS server:
1. Navigate to Device > Diagnostics > Real-Time Blacklist.
2. Enter an IP address in the IP address field, a FQDN for the RBL in the RBL Domain field, or DNS server information in the DNS Server field.
3. Click GO.

Reverse Name Lookup

The Reverse Name Lookup feature returns the DNS server name for a given IP address. The Log Resolution DNS server 1, 2, and 3 shows the DNS servers configured for the firewall. You can manually configure the DNS servers from Network > DNS. SONICWALL SonicOS 7.1 Diagnostics for Classic Mode - Reverse
Name Lookup To look up an IP address:

Navigate to Device > Diagnostics > Reverse Name Lookup.
Enter the IP address in the Reverse Lookup the IP Address field.
Click GO.

Connection TopX

Navigate to Device > Diagnostics > Connection TopX. The Connection TopX feature lists the top 10 connections by the source and destination IP addresses. Before you can use this tool, you must enable source IP address connection limiting and /or destination IP address connection limiting for your appliance. If these are not enabled, the page displays a message to tell you where you can enable them. SONICWALL SonicOS 7.1 Diagnostics for Classic
Mode - Connection TopX

Geo and Botnet

The Geo and Botnet Lookup feature allows you to look up the connections to or from a geographic location based on IP address and to or from Botnet command and control servers. SONICWALL SonicOS 7.1 Diagnostics for Classic Mode - Geo
and Botnet To troubleshoot with GEO Location and BOTNET Server Lookup:

Navigate to Device > Diagnostics > Geo and Botnet.
Type the IP address or domain name of the destination host in the Lookup IP field.
Click GO. The result displays underneath the Lookup IP field.

In the MX Record Lookup and Banner Check section, you can perform:

An MX Record lookup for a given domain name.
A connection check to the resulting host server or supplied IP address to retrieve the SMTP banner.

The DNS servers are displayed by default in the DNS Server 1/2/3 fields. The SMTP port is displayed in the MTP Port field.
When you enter a domain name or IP address, the Comprehensive Anti-Spam service attempts to connect to that server and retrieve the SMTP banner. This feature allows you to verify that an email sender is not spoofing an address to appear more legitimate.
NOTE: This feature is only available when the Essential Protection Service Suite or Comprehensive AntiSpam Service is licensed on the firewall.

To look up the MX record of an emailer or domain:

Navigate to Device > Diagnostics > MX and Banner.
Enter the domain name or IP address in the Lookup name or IP field.
Click GO. The results are displayed.

GRID Check

This feature helps to check the GRID Network IP Reputation – the reputation a particular IP address has, with members of the SonicWall GRID Network. When this feature is enabled, email is not accepted from IP addresses with a bad reputation. When SonicWall receives a connection from a known bad IP address, it responds with a 554 no smtpd here error and the SMTP session is rejected. NOTE: This feature is only available when the Essential Protection Service Suite or Comprehensive Anti- Spam Service is licensed on the firewall.
To perform a grid-check:

Navigate to Device > Diagnostics > Grid Check.
Specify the Host IP Address.
Click Go.

URL Rating Request

Content Filtering Service feature classifies websites under 64 categories based on the content. You can find information about a website by looking up the URL in the CFS URL Rating Request feature. To look up a URL:

Navigate to Device > Diagnostics > URL Rating Request.
Enter the URL in the Lookup Rating for URL field.
Click Go.

PMTU Discovery

PMTU Discovery is a diagnostic tool that uses a standardized technique for determining the maximum transmission unit (MTU) size on the network path between two Internet Protocol (IP) hosts, usually with the goal of avoiding IP fragmentation. PMTU Discovery works with both IPv4 and IPv6 protocols. SONICWALL SonicOS 7.1 Diagnostics for Classic Mode - PMTU
Discovery To troubleshoot with PMTU Discovery::

Navigate to Device > Diagnostics > PMTU Discovery.
Type the IP address or domain name of the destination host in the Path MTU Discovery to this host or IP address field.
In the Interface drop‐down menu, select which WAN‐specific interface you want to test the trace route from. Selecting ANY, the default, allows the firewall to choose among all interfaces—including those not listed in the drop‐down menu.
Click GO.
Depending on the route, this may take a few minutes. A pop-up table displays with each hop to the destination host. By following the route, you can diagnose where the connection fails between the firewall and the destination.

Switch Diagnostics

The Switch Diagnostics page displays the port status and port counters of a SonicWall Switch connected to the firewall. SONICWALL SonicOS 7.1 Diagnostics
for Classic Mode - Switch Diagnostics To access Switch Diagnostics:

Navigate to Device > Diagnostics > Switch Diagnostics.
Select the interface that is connected to the Switch from the Interface drop‐down menu.

SonicWall Support

Technical support is available to customers who have purchased SonicWall products with a valid maintenance contract.
The Support Portal provides self-help tools you can use to solve problems quickly and independently, 24 hours a day, 365 days a year. To access the Support Portal, go to https://www.sonicwall.com/support.
The Support Portal enables you to:

View knowledge base articles and technical documentation
View and participate in the Community forum discussions at https://community.sonicwall.com/technology-and-support.
View video tutorials
Access https://mysonicwall.com
Learn about SonicWall Professional Services at https://sonicwall.com/pes.
Review SonicWall Support services and warranty information
Register for training and certification
Request technical support or customer service

To contact SonicWall Support, visit https://www.sonicwall.com/support /contact-support.

About This Document

SonicOS Diagnostics for Classic Mode Administration Guide
Updated – December 2023
Software Version – 7.1
232-005866-00 Rev A
Copyright © 2023 SonicWall Inc. All rights reserved.
The information in this document is provided in connection with SonicWall and/or its affiliates’ products. No license, express or implied,
by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of products.
EXCEPT AS SET FORTH IN THE TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR THIS PRODUCT, SONICWALL AND/OR ITS AFFILIATES ASSUME NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL SONICWALL AND/OR ITS AFFILIATES BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF SONICWALL AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SonicWall and/or its affiliates make no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. and/or its affiliates do not make any commitment to update the information contained in this document. For more information, visit https://www.sonicwall.com/legal.

End User Product Agreement
To view the SonicWall End User Product Agreement, go to: https://www.sonicwall.com/legal/end-user-product-agreements/.
Open Source Code
SonicWall Inc. is able to provide a machine-readable copy of open source code with restrictive licenses such as GPL, LGPL, AGPL when applicable per license requirements. To obtain a complete machine-readable copy, send your written requests, along with
certified check or money order in the amount of USD 25.00 payable to “SonicWall Inc.”, to:
General Public License Source Code Request
Attn: Jennifer Anderson
1033 McCarthy Blvd
Milpitas, CA 95035

SonicOS 7.1 Diagnostics for Classic Mode Administration Guide
SonicWall Support

Documents / Resources

| SONICWALL SonicOS 7.1 Diagnostics for Classic Mode [pdf] User Guide
SonicOS 7.1 Diagnostics for Classic Mode, SonicOS 7.1, Diagnostics for Classic Mode, Classic Mode
---|---