QAZQA 92855 Bridge GR 20W LED Aluminium Spot Light Instruction Manual
- June 4, 2024
 - 1 by one
 
Table of Contents
QAZQA 92855 Bridge GR 20W LED Aluminium Spot Light
INSTALLATION INSTRUCTION

PRODUCT SPECIFICATION
- Inground lamp incl.LED QL7001199
 - 2400lm lamp
 - 20W LED
 - 220-240V~ 50Hz 3000K
 - CRI>80
 - 30000h
 - 15000 ON/OFF
 
Overall Size:

This product contains a light source of energy efficiency class
Replaceable (LED only) light source by a professional.
Replaceable control gear by a professional.
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
 - Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
 - The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
 - Exterior lighting must not be installed during rain.
 - Take account of the minimal separation distance from other objects and the room required around the fitting.
 - If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
 - Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
 - Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
 - Take account of all available technical information.
 - Meaning of symbols:
- For indoor use only, where direct contact with water is impossible
 - This icon indicates the level of water-proof and dust-proof
 - Protection Class I: the fitting must be earthed
 - Protection Class II: the fitting is doubled insulated and does not require earthing
 - Protection Class Ill: the fitting is low voltage
 - Minimum distance from lighted objects (meters)
 - The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
 - The armature is designed to work only with the indicated voltage. Different items require different working voltage.
 - The luminaire can be used in combination with a dimmer
 - The reference light angle and light space of the luminaire
 - This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
 
 - Take note of the symbols when connecting wires:
 

ABOUT COMPANY
- FittinQ B.V.
 - Smaragdweg 52, 5527 LB Hapert,
 - The Netherlands
 - www.qazqa.nl
 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>