timberk T-EP02N6 Trimmers and Electric Razors User Manual

timberk T-EP02N6 Trimmers and Electric Razors

Product Information

Specifications

• Model: T-EP02N6
• Power: 5W
• Battery Type: Lithium 1400mAh
• Battery Voltage: 3.7V
• Waterproof Rating: IPX5
• Charging Time: 5 hours
• Usage Time: Up to 100 minutes
• Accessories: A. Epilator Head (x3), B. Cleaning Brush, C. Power Adapter, D. User Manual, E. USB Charging Cable

Product Usage Instructions

Important Information:
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage to the appliance or its parts during transportation, incorrect installation, voltage fluctuations, or any modification made to the appliance.

Device Overview:
The device consists of several parts:

• Epilator Head: This is the main attachment for removing hair.
• Cleaning Brush: Use this brush to clean the epilator head after use.
• Power Adapter: Connect the power adapter to charge the device.
• User Manual: Refer to this manual for detailed instructions on usage.
• USB Charging Cable: Use this cable to charge the device via USB.

Charging the Device:
To charge the device, follow these steps:

1. Connect the power adapter to the device’s charging port.
2. Plug the power adapter into a power outlet.
3. The device’s LED indicator will light up to indicate charging.
4. Charging takes approximately 5 hours.
5. Once fully charged, the LED indicator will turn off.

Using the Epilator:
Before using the epilator, make sure the device is charged and clean. Follow these steps:

1. Select the desired epilator head and attach it securely to the device.
2. Make sure your skin is clean and dry before use.
3. Gently place the epilator head against your skin at a 90-degree angle.
4. Move the epilator in the opposite direction of hair growth, applying light pressure.
5. Avoid pressing too hard to prevent skin irritation.
6. Continue moving the epilator across the desired area until all hair is removed.

Frequently Asked Questions (FAQ):

• Q: Can I use the epilator while it is charging?
  A: No, it is not recommended to use the epilator while it is charging. Disconnect it from the power source before use.

• Q: How often should I clean the epilator head?
  A: It is recommended to clean the epilator head after each use to maintain optimal performance and hygiene.

• Q: Can I use the epilator on wet skin?
  A: Yes, the epilator is waterproof and can be used on wet skin. However, it is recommended to dry your skin before use for better results.

• Q: What is the warranty period for the device?
  A: Please refer to the warranty information provided in the user manual or contact customer support for details on the warranty period.

Dear customer!
We thank you for your wise choice and the purchase of this timber epilator. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with the cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which does not fundamentally affect its safety, performance, and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage to the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

PRECAUTIONS

When using this epilator, please observe the following precautions. Improper operation while ignoring these precautions can result in injury to the user and others, as well as damage to their property.

1. This device should only be charged using the appropriate adapter (the adapter is not included in the package).
2. Be sure to unplug the charger before cleaning the epilator under water.
3. When the product is stained, a soft cloth can be used to take neutral lotion and wipe. Do not use alcohol, gasoline, or other chemicals to wipe.
4. When abnormal conditions (such as odor, temperature, and sound) occur during the use of the product, it should be closed immediately and stopped using.
5. Do not attempt to repair the device yourself. If problems occur, contact the seller.
6. Read the manual thoroughly and keep it for future reference.
7. Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
8. The appliance should be used only for domestic use by the present manual. The appliance is not intended for industrial use.
9. Do not use outdoors.
10. Always switch the appliance off before cleaning and when not in use.
11. To prevent the risk of electric shock and fire, do not immerse the appliance in water or any other liquids.
12. The appliance should not be used by persons with reduced physical, sensory, or mental abilities (including children), or persons having insufficient skills or knowledge, without supervision or instruction of a person responsible for their safety.
13. Children should be supervised to ensure that they do not play with the appliance.
14. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
15. Сleaning and user maintenance shall not be made by children without supervision.
16. Do not leave the appliance switched on when you do not use it.
17. Do not use other attachments than those supplied.
18. Don’t use the device with the damaged power cord. Battery disposal must be safe
19. Keep the cord away from sharp edges and hot surfaces.
20. When unplugging the product, do not pull the power cord, but hold onto the plug. Do not twist it or wrap it around anything.
21. Never insert any objects or liquids into openings in the appliance housing.
22. Do not put working appliances anywhere as it may lead to physical damage or material loss.
23. Do not use the device with damaged parts – this may cause an injury.
24. ATTENTION! Before cleaning the appliance in water, unplug it from the mains.
25. Do not throw the appliance into the fire.
26. Do not charge the device in a high-humidity environment. Keep the charging port and device always dry.
27. Do not use the device near explosive substances.
28. It is recommended not to use the device while charging.
29. Do not wind the electrical cord around the appliance.
30. Turn off the device before charging.
31. Always put a protective cover on the working surface of the device when transporting it.
32. The appliance must only be powered by safe extra low voltage marked on the appliance.
33. This device contains non-replaceable batteries.
34. Do not charge the device for too long. Do not charge the device at temperatures below 0 ºC or above 40 ºC. Otherwise, it will reduce battery life.
35. ATTENTION! Disconnect hand-held parts from the power cord before cleaning them in water.
36. If the product has been exposed to temperatures below 0 °C for some time, keep it at room temperature for at least 2 hours before turning it on.

General information about epilation
All root hair removal methods can lead to skin irritation (such as itching, discomfort, and redness) depending on the condition of the skin and hair. This reaction is normal and usually passes quickly, however, irritation may be stronger when hair is removed from the root in the first few times or with sensitive skin. Skin reactions and pain sensations are significantly reduced with repeated use of the device. If, after 36 hours, the irritation has not gone away from the skin, it is recommended to consult a doctor. To minimize the risk of infection or inflammation due to bacteria entering micro-lesions on the skin, thoroughly clean the epilation head and the skin surface before each procedure. If you have any doubts about using the device, consult your doctor.

DESIGNATION

This device is designed for body and face care: epilation, shaving, and cleansing. With its help, you can remove hair from the body and face using various attachments from the kit, as well as take care of the skin – clean and massage. The Timberk epilator can be used on dry and wet skin, it is permissible to use it in the bathroom or shower.

SPECIFICATIONS

Specifications of the device are shown in Table 1.

Table 1

Moisture protection

class

| –| IPX5

DEVICE DESCRIPTION

• A. Comb (3 mm)
• B. Shaving head
• C. Indicator light
• D. Switch
• E. Charging indicator light
• F. Charging socket
• G. Massage head
• H. Soft brush
• I. Detachable comb
• J. Bikini head
• K. Nozzle detachment button
• L. Protection cap
• M. Epilator head
• N. Transparent cover
• O. Lock button
• P. Grinder head
• Q. Brush
• R. Oil bottle
• S. USB charging cable
• T. Travel bag

DELIVERY SET

• Epilator – 1 pc.
• Detachable nozzle – 5 pc.
• Travel case – 1 pc.
• USB charging cable – 1 pc.
• Cleaning brush – 1 pc.
• Oiler – 1 pc.
• Instruction manual – 1 pc.
• Packaging – 1 pc.

BEGINNING

Charging:

• When charging, please insert the small plug of the adapter into the socket at the bottom of the product, and then insert the power adapter into the power socket as shown in Fig 1.
• When charging, the breathing white light indicates that it is charging. Fig. 2.
• After charging for about 2 hours, when the breathing white light is on for a long time, it indicates that the charging has been completed.

OPERATION

The device is suitable for use on dry skin, as well as on wet skin in the bath or shower. If you want to use creams or body lotion, apply them after using the device. For a soft and less painful epilation, use the device on wet skin with or without regular shower gel. After epilation, mild skin irritation may occur, such as redness of the skin or red dots. It is ok. We advise you to do hair removal before going to bed, as any redness or irritation of the skin usually disappears overnight.

• When performing epilation (with or without a nozzle on the head of the epilator), place the device on the skin, depending on the direction of hair growth
• When using the device on sensitive areas, stretch the skin with your free hand. When you use the device for armpits, raise your hand and place your palm on the back of your head to stretch the skin

Switch on/off

• Press the button once, and the appliance starts to work, meanwhile, both indicator light lights up and the illumination light lights up continuously.
• Press the button twice, the motor speed becomes faster and both the indicator light and illumination light are on continuously;
• Press the button three times, the motor stops working, and all lights out at the same time.

ATTACHING AND DETACHING HEADS

1. To attach a head, press it onto the handle.
2. To detach a head, press the release the button on the back of the appliance.

Epilating head
When using the epilating head, push the head perpendicular to the skin and against the direction of hair growth;

• Dry hair removal: The skin should be dry, and there should be no fat or cream on it.
• Wet hair removal: The skin should be well moisturized for better sliding of the device.

Before massaging, massage the arms and legs with a massage bath to make the hair stand up. After 15 minutes of hot water bathing, the skin will soften, the pores will relax and the pain will be minimized. After the hair is plucked, moisturize the skin with some gentle lotion.

• The epilation head should be clean and used with a nozzle for precise hair removal

NOTE:
The epilator nozzle is equipped with a backlight for more detailed skin treatment

Cleaning (only when the appliance is switched off)
After using the device, turn it off and clean the epilator nozzle by removing the protection cap. Clean the nozzle tweezers with the supplied brush by turning them manually. Remove the nozzle from the body of the device and tap it lightly to remove any remaining hair. If the contamination of the hair is strong, the device, with the nozzle installed, can be rinsed under a stream of hot water. After rinsing, disconnect the nozzle and let it dry.

Shaving head
The shaving head is designed for shaving the legs, armpits, and bikini area. For best results, perform the shaving procedure on dry skin. To trim the hairs to a length of 3 mm, attach a comb attachment and guide it horizontally along the surface of the skin, with holes against the direction of hair growth.

Cleaning (only when the appliance is switched off)
Do not clean the shaving head with a brush, as this may damage the mesh. The shaving head can be rinsed under running water. Remove the shaving unit and dry the appliance. Regular lubrication of parts (mesh + trimmers) is required.
After cleaning, apply a little oil from the oiler to the edge of the knife blade, activate the blades for a while, turn them off, and then wipe off the protruding excess oil. This procedure helps the blades maintain sharpness, rotate easily, and prevent wear.

Trim head

• You can use the trimmer head to trim bikini parts and hard-to-reach places;
• Please place the trim head flat on the skin for trimming and place the trim head perpendicular to the skin for modeling and trimming
• You can install the comb on the tip to trim the hair from the bikini to the desired length

Cleaning: (only when the device is switched off)
Clean the trimmer blades after each use with the included brush. Also, it is necessary to regularly lubricate the blades of the trimmer nozzle with the oiler from the supplied kit to increase its service life. After lubrication, it is recommended to turn on the machine for a while to remove excess oil. After cleaning, apply a little oil from the oiler to the edge of the knife blade, activate the blades for a while, turn off, then wipe off the protruding excess oil. This procedure helps the blades maintain sharpness, rotate easily, and prevent wear.

Body massage head and cleaning brush

• The body massage head rotates firmly to relax your muscles.
• You can use the cleaning brush to remove skin cells.

Attach the massager or brush to the base of these nozzles, then attach the base to the body of the device. Move the device over the skin in slow circular movements to achieve the desired result. Do not linger on the same area of the skin for a long time.

Cleaning (only when the appliance is switched off)

• After use, rinse the brush/nozzle under running water.
• If necessary, use liquid soap for a more thorough cleansing. Remove the lid from the deep massage nozzle and make sure there is no water inside.
• Keep the peeling brush in a protective cap.

Grinding head
When using the grinding head, soak the feet to soften the cutin, and then dry the water on the feet. Then select a suitable grinding head and polish the required parts. After grinding the feet, rinse them with clean water and apply moisturizer.

Cleaning: (only when the device is switched off)
To clean the device, remove the nozzle roller using the side button and rinse it under running water, then dry it. Remove the skin particles from the base of the nozzle. Secure the roller to the base.

STORAGE

• Keep the appliance in a cool, dry place
• Put protection combs on the heads to prevent damage to the heads when you store them.
• Store the product, its heads, and accessories in the pouch.

REMOVING THE BATTERY

• The battery should be removed from the appliance before its utilization
• Unplug the appliance from the main socket and switch it off before removing the battery.

TROUBLESHOOTING

device, always make sure it is fully in contact with the skin. Always move the appliance against the direction of hair growth. As not all hair grows in the same direction, this means that you have to move the appliance up, down, and sideways.
The appliance does not work| The battery is empty| Recharge the device
Skin irritation appears after shaving| The skin is not accustomed to the new device| It takes approximately 2-3 weeks for the skin to completely get used to the new device
The device is not charging| The ambient temperature is not correct| Do not charge the device at temperatures below 0 oC or above 40 oC.
Usage time after fully charged is less than 60 minutes| Engine load increases if the shaving head (shaving surfaces) has not been cleaned for a long time| Clean shaving heads (shaving surfaces) and/or hair compartment

UTILIZATION RULES

The symbol on the unit, packing materials, and/or documentation means used electrical and electronic units should not be tossed in the garbage with ordinary household garbage. These units should be passed to a special receiving point. For additional information about the actual system of garbage collection, address the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect use of garbage.

The symbol on the unit, packing materials, and/or documentation means the battery used in this product not be tossed in the garbage with ordinary household garbage.

www.timberk.ru.

References

• Timberk - Официальный сайт бренда бытовой техники

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>