innova SW-19 Smart Watch Fitness Snow User Manual
- December 21, 2023
- InnOVA
Table of Contents
**innova SW-19 Smart Watch Fitness Snow User Manual
**
Thank you for using our smart watch INNOVA.
Important! The data provided by the smart watch, such as heart rate, blood oxygen and blood pressure, are merely indicative, it is not an exact medical measuring device.
Even if you are well, go to all the appointments scheduled by your doctor.
Recommendations for people with sensitive skin during use of electronic wrist devices, Smartwatch and Smartband.
The materials used for our INNOVA Smartwatches and Smart-bands are selected following a rigorous control of hypoallergenic measures, as well as guaranteeing that all materials comply with current regulations for materials in contact with the skin.
A small number of people, however, may experience some type of skin reaction.
If you suspect, or know, that you are allergic or have an above average sensitive skin type, you should monitor the use of these devices for any type of reaction due to said allergies, environmental factors or prolonged exposure to irritants, like soap,sweat, or other causes.
Smartwatches and Smartbands may contain materials such as nickel and acrylates which, even though they are within the permitted amounts in the manufacturing process, may cause skin to react if you are sensitive to them. If you use these devices for a prolonged period of time, you may be more susceptible to developing skin sensitivities. To avoid possible skin irritations we recommend you do not expose the device to chemicals or use it if your skin has, or has been recently applied with, any of the products listed below:
- Insect repellents
- Moisturizing creams and lotions
- Oils
- Perfumes
- Antiseptic gels
- Soaps
- Sun protection creams
It is recommended that the devices are used when the skin is completely dry and free of any of the aforementioned products to avoid having charging contacts and measurement sensors in contact with wet skin. They are not submersible or waterproof.
Clean the device thoroughly to remove sweat after training and allow it to dry.
Prolonged exposure to moist
It is also advisable not to wear these devices too tight or too loose.
If the strap is too tight, it may cause skin irritation. If the strap is too loose, chafing may occur.
The watch strap should be left so that it can move slightly back and forth on the wrist. are can cause skin irritation.
If you wear the device for prolonged periods of time, remove it to give your skin a rest. To avoid irritation, swap the device to your other wrist. If you notice redness, swelling, itching or any other irritation, remove the Smartwatch immediately and consult your physician before using the device again.
Special attention must be paid to the use of these devices in places with relatively low humidity conditions.
When using the Smartwatch/Smartband in places with low relative humidity (dry/poorly ventilated places, low humidity atmospheric conditions, dry indoors, if heating or air conditioning is always on, etc.), as with any other electronic device, it may be affected by charges of static electricity on rare but certain occasions. This may cause damage to the device and also to the person wearing it at that time. Static electricity is everywhere. It surrounds us without us perceiving it.
An effective trick to avoid a high percentage of static electricity at home:
- Use a humidifier. Humidity is a good conductor of electricity therefore, by maintaining an acceptable percentage of it, we will avoid static in areas of the home where we metal objects may be found. Small containers of water on top of radiators is another alternative solution.
The use of the devices in bed, whilst sleeping, is especially discouraged for children and the elderly due to the fact that repeated movements during the night may cause, through friction with sheets, blankets, etc. a charge of static electricity. This may result in a sudden discharge of the watch’s battery and/or heating of same as the human body is a conductive element and can cause a reaction to people with sensitive skin, redness, irritation, etc.
If you notice redness, swelling, itching, or any other form of irritation, remove the
Smartwatch immediately and consult your physician before using the device again in case you are suffering from any type of reaction, allergic or otherwise.
INNOVA CELLULAR.
INNOVA CELULAR SL
B84215623
C/ Severo Ochoa nº 9 nave 8 módulo B Rivas Vaciamadrid 28521 (Madrid)
Tel. +34 914990624
Fax + 34 916660271
Before using the device please read this instruction manual in its entirety.
Wearing
Place the bracelet on your wrist, and adjust the strap for a comfortable wear, ensuring the sensor is in contact with your skin. If the sensor is not in contact with your skin, the measurements will not be accurate.
Charging
Before using the device for the first time, please ensure the battery is charged. If the device does not turn on, please connect it to the battery charger for it to activate.
Pairing device to phone
IMPORTANT!
Please do not pair your device directly to your phone’s Bluetooth. If you have already done this, please remove it from “paired devices” as it will prevent its connection to the application.
-
Download the application Smart Bracelet INNOVA S-BANDS from Google Play Store / Apple Store or, alternatively, scan the following QR Code and install it.
APP / APK: INNOVA S-BANDS
Minimum System requirements: Android 5.0; iOS9; Bluetooth 4.2 -
Open the application and grant all access requests.
-
To finish pairing, press the “Set” icon and then press “Bind devices to…” banner (highlighted). You will then find “SW-19” which, once selected, will pair to your phone.
The watch should now show local date and time and the top of the application should appear as follows: ****
From “Message Push” you can set up the APPS from which you wish to receive information on your device (Calls, WhatsApp, Facebook, Twitter, etc.). Restarting and/or removing the device will cause data to be deleted. -
In the “Step” icon you can view your daily steps and your set objectives / targets
Further below, you can also view a summary of the distance walked as well as other information such as your heart rate and/or sleeping patterns. If you press on the information displayed, another screen will open, and you can start measuring your heart rate or see the details of your sleeping habits. At the bottom you will find “Healthy habit” in which you can specify “eat breakfast”, “go to bed early”, etc. -
Within “Motion” you will find different options such as “walk”, “run” or “bike”. Pressing “Start” and having your GPS activated, you can see the distances achieved as well as the route. To stop swipe the lower bar to the right and press “End”. To see the route, press the gear icon.
-
Press “Mine” to view details of different data, a summary of your activities and, in “User Profile”, establish your personal information (sex, age, height, etc.).
Function description
- Power on : Long press lateral button
- Long press the home button to switch off the device
- To navigate swipe up and down or left and right to scroll through the main menu and dial.
- Swipe left and right from the homepage to go to step count, heart rate measurement & APP QR code.
- On standby long press the screen for 2 seconds to switch between different dials.
- To select a watch face, long press and apply.
- The reset device feature clears all data in the fitness tracker and restore factory setting.
- To start any function enter the interface screen and wait for 60 seconds to start the count.
- For eg. to start the three-in-one HR BP and Blood oxygen count, swipe to the screen and wait for few seconds, the count will start automatically
**Interfaces
**
Tracks Step: This interface is to track no of step, distance travelled and calorie burned.
- Number of steps: Wear the watch and record the number of steps you take realtime steps.
- Distance: The distance of motion is estimated based on the on the number of walking steps.
- Calorie: Estimate the calories burnt based on the number of walking steps.
Health: This interface is to track HR, BP and Blood oxygen level after swiping to the “health” interface for a few seconds, the current heart rate, blood pressure and blood oxygen level results will be displayed on the screen.
Multiple sports mode: This interface is to track and monitor physical activity and work outs through the 11 predefined sports mode you can monitor your work outs accurately and keep a check on your calorie burnt.
Information mode: The watch is capable of pushing multiple reminder messages, and notifications.
Incoming call alert
In the connected state, if the call alert function is enabled, for incoming
calls the watch will vibrate and display the name or number of the caller
SMS Notifications
In the connected state, if the SMS reminder function is enabled, the watch
will vibrate when there is a text message.
Other Notifications
In the connect state, if this function is enabled, for any notifications and
message on Whatsapp, Instagram, Facebook, etc. The watch will vibrate to
remind and display the message.
P.S.
You can view the last three message / notifications from the menu. You need to give the APP permission to get system notification. The watch can display up to 40 words only.
APP function and settings
Personal information
To setup personal information, go to setting and set your personal information like name, gender, age, height and weight. You can also set your daily goal and steps to monitor your daily activity
Sleep mode
When you fall asleep, the watch will automatically enter the sleep mode and will automatically detect and monitor your sleep pattern (deep sleep / shallow sleep / wake up) all night to accurately calculate your sleep quality
P.S
- Sleep data can be seen from the watch or APP
- Weareing the watch to sleep is must to track sleep pattern.
- Sleep mode will get activated at 10 pm
Alarm setting
In the connect state, 8 alarms can be set. After setting the alarm, it will be
synchronized to the watch. After syncing the alarm with the watch through the
app, it will function even if the watch is not connected to the app.
Remote photography
In the connected state, start the photo from the watch or the APP to enter
there mote camera interface. Shake the watch to remotely click photo
automatically. Please allow the APP to access the photo album to save the
clicked photo.
Sedentary reminder
By setting the sedentary reminder function, you can choose to get reminded by
the watch to move around when you are setting for a longer time.
Find your watch function
In the connected state, click the “Find My Watch” option and the watch will
vibrate.
Raise your hand to switch-on
On standby when you lift your wrist and turn the screen, it lights up coming
out sleep mode
Do not disturb mode
Turn on the do not disturb mode. You can set the do not disturb time period.
During the set time period, the watch stop receiving notification and
messages. Choose the clock 12-24 hours Long press the main screen for choose
clock 12-24 hours
Customize your wallpaper
You can choose photos from your smartphone and set as a wallpaper in your
smartwatch
Device reset
This feature resets the watch to factory setting and erase all the previous
data / information.
Remove device
This feature will erase data from the app and remove the device.
Other information
When there is a call, message or other reminder the watch will vibrate.
P.S.
- Turn on vibration to set this function
- If the vibration feature is switched off, the watch will only show reminder on the screen without shaking to avoid any disturbance.
Tips for Android users:
When using the reminder function, you need to set it to allow “INNOVA S-BANDS” to run in background. It is recommended to add “INNOVA S-BANDS” to the rights management and allow all permissions.
Precautions
- The watch remain connected with the APP at all times to continue to sync data.
- Use the original charging cable provided in the packaging only to charge your watch
- Do not expose the watch to high moisture, high temperature or very low temperatures for a long duration of time.
- Do not expose the watch at extreme temperatures, the batteries could exploit.
- If the watch appears to crash and restart, please check the phone memory information to clear space or exit the APP and reopen to reconnect it again.
- The watch is not waterproof
Features
Step / Distance / Calories / Heart rate / Blood pressure / Oxygen saturation / Sleep monitoring / Alerts (call, sms, Whatsapp….) / Alarm clock / Sedentary reminder / Differents exercise mode / Turn the wrist and shine the screen / Find watch / Remote photography / Weather / Music control / Battery capacity: 150 mah (Up to 7 days (depend of the use)) / Splash resistant (NO WATERPROOF) / BT frequency band: 2.4 GHz / Maximum emitted RF power < 100 mW
Customer service
Only in English, Spanish and Portuguese Servicio de atención al cliente / Customer Service / Serviço de apoio ao cliente (Español / English / Português): +34 91 713 94 98
Horario de atención al cliente:
De lun. a Jue. de 08:00 a 14:00 y de 15:30 a 17:30 y los Vier. de 09:00 a 14:00
Working hours: Mon to Thu from 08:00 to 14:00 and from 15:30 to 17:30 and Fri. from 09:00 to 14:00
Horário de funcionamento de apoio ao cliente:
De 2ª a 5ª feira das 08:00H ás 14:00H e das 15:30H ás 17:30H
6ª feira das 09:00H as 14:00H
sac@innovacelular.com
Declaration of conformity
Through this INNOVA CELLULAR, it declares that the INNOVA SMART WATCH FITNESS SNOW (SW/19 (Y77 360CH SENA)) complies with the essential requirements and any other applicable or enforceable provisions of Directives 2014/30/EU, 2014/53/UE (RED) and RoHS 2011/65/EU annex II amending annex (EU) 2015/863 and amended by Directive (EU) 2017/2102 To see the complete declaration of conformity, you can access it through the following link: http://www.innovacelular.com/images/web/descargas/descargas/declaracion/declaracion_sw-19.pdf
Guarantee
NOTE: The INNOVA SMART WATCH FITNESS SNOW (SW/19 (Y77 360CH SENA))) It has a 3-year warranty from the date of purchase. Special importance in the durability of the products have the elements that compose it and that suffer from degradation and loss of capacities due to their use, being understood as normal wear that they lose capacity, especially in the case of rechargeable batteries, depending largely on infinity of external factors (hours of use, charge and discharge cycles, use of inappropriate chargers, temperatures of use, not respecting the recommended charging times, etc…) For the guarantee of wear and tear parts, it must be taken into account that the loss of autonomy of the battery as a result of its aging does not imply a manufacturing defect, so it is considered normal that after 6 months have a loss of 10%, at 15 months 20% – 30% at 24 months 45%, all corresponding to proper use of the battery and the charge and discharge cycles carried out. Any battery that presents symptoms other than those listed in this manual, will be inspected by the technical service and assessed for its affectation to guarantee. If after 24 months from its purchase the battery presents symptoms different from those detailed, it will be understood to be exempt from guarantee for the reasons stated above and will be left out of the inspection process, becoming the customer who, if they so wish, must reliably demonstrate that the battery presented defects other than those detailed in this manual before those 24 months.
Safety warnings
Important Safety Information: Handle the Smart Watch with care. They contain sensitive electronic components, including batteries, and may malfunction, affect performance, or cause damage if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat, liquid, or high-pressure environments. concentrations of industrial chemicals, including nearly evaporated liquefied gases such as helium. Do not use the Smart Band if it is damaged.
Batteries: Do not try to replace the battery of the Smart Watch by yourself, as you could damage the Smart Watch and cause overheating and injury.
Charge: Charge the Smart Watch with the charging cable and a power adapter or a computer, charge the device only with an adapter that meets relevant national, international and regional safety standards. Other adapters may not meet applicable safety standards and their use to charge the Smart Watch may present the risk of injury or death. Using damaged cables or chargers, or charging the device if they are wet, may cause fire, electric shock, injury, or damage to the case or other belongings.
Prolonged exposure to heat: Avoid prolonged skin contact with the device, power adapter, charging cable and its connector, or the wireless charger when connected to a power source, as this may cause discomfort or injury.
Choking hazard: The Smart Watch and the small parts included may present a choking hazard to small children or cause other injuries. Always keep them out of the reach of children.
Interference with medical devices: The Smart Watch and charger contain components and radios that emit electromagnetic fields. These electromagnetic fields and magnets that the device may contain may interfere with the operation of pacemakers, defibrillators, or other medical devices. Keep a safe distance between the medical device and the Smart Watch. Request specific information about the medical device from the manufacturer and your doctor. Stop using the Smart Watch if you suspect it is interfering with your pacemaker, defibrillator, or other medical device.
Skin irritations: The Smart Watch can cause skin irritation if not cleaned properly. Regularly clean the Smart Watch with a soft, lint-free cloth. In the event of any type of skin reaction, stop using the Smart Watch. If the problem persists, see your doctor.
Electrostatic dischargess: When using the Smart Watch in areas where the air is very dry, it is easy to accumulate static electricity, so you may feel a small electrostatic discharge from the Smart Band on your wrist. To minimize this risk, avoid using the Smart Band in extremely dry environments, or touch a grounded, unpainted metal object before putting on the Smart Watch.
Important Driving Information: Discoloration of the connector and the bottom of the Smart Watch after continued use is considered normal. Dirt, debris, and exposure to moisture could cause discoloration.