sycamore Lighting SY9102 Belice LED Bathroom Mirror with Shaver Socket and Demister Instruction Manual

June 4, 2024
sycamore Lighting

sycamore Lighting SY9102 Belice LED Bathroom Mirror with Shaver Socket

and Demister

Thank you for purchasing this SycamoreLED.com product.
Please make sure instructions are followed carefully prior to and during installation and product is not altered, otherwise warranty may not be valid. For technical support or warranty information please visit www.sycamoreLED.com, or call our dedicated technical helpline +44 (0) 113 2866686.

IMPORTANT—Please read prior to installation

  1. Please read these instructions carefully before commencing any work
  2. Please retain these instructions for future reference
  3. This unit must be installed by a qualified electrician in accordance with the IEE wiring regulations and building regulations
  4. To prevent electrocution switch the power off at the mains supply before installing or maintaining this fitting
  5. Ensure others cannot restore the electrical supply without your knowledge

CONTENTS & TOOLS REQUIRED

sycamore-Lighting-SY9102-Belice-LED-Bathroom-Mirror-with-Shaver-Socket-and-
Demister-FIG-1

BATHROOM REGULATIONS

sycamore-Lighting-SY9102-Belice-LED-Bathroom-Mirror-with-Shaver-Socket-and-
Demister-FIG-2

INSTALLATION INSTRUCTIONS

sycamore-Lighting-SY9102-Belice-LED-Bathroom-Mirror-with-Shaver-Socket-and-
Demister-FIG-3 sycamore-Lighting-SY9102-Belice-LED-Bathroom-Mirror-with-Shaver-
Socket-and-Demister-FIG-4 sycamore-Lighting-SY9102-Belice-LED-Bathroom-Mirror-
with-Shaver-Socket-and-Demister-FIG-5

Switching on/off

  • Pressing the touch button on the front of the mirror will switch the mirror on
  • Touch again to switch off

Demister Function

  • The demister will automatically switch on when the sensor button is pressed to switch light on.
  • Demister will switch off automatically after 60 minutes.

Shaver Socket

  • Rated voltage:220-250V,50-60Hz
  • Rated current:10A-16A
  • The maximum wattage for the shaver socket is 19.2W.

CARE IN USE

  • Please note this fitting has non-replaceable parts
  • Always switch off or disconnect from the mains when cleaning the product.
  • We recommend cleaning with a soft dry cloth. Do not use scourers, abrasives or chemical cleaners.
  • Do not allow moisture to come into contact with electrical parts
  • This luminaire should not be disposed of with normal household rubbish. When a replacement is purchased, this luminaire should be returned to the retailer to safely dispose of (WEEE Directive effective July 2006—Waste from Electrical & Electronic Equipment)

This product contains a light source of energy efficiency class G.
SycamoreLED.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals