hp HyperX Pulsefire Haste 2 Mini Wireless Gaming Mouse User Manual

Quick Start Guide v2
HyperX Pulsefire Haste 2 Mini
Wireless Gaming Mouse

Overview

dongle
D| DPI button| I.| Power mode switch| N.| Extension adapter
E.| Forward button| J.| USB wireless dongle storage| O.| USB charge / data cable

Charging and Wired Mode

It is recommended to fully charge your mouse before first use.
Connect the mouse to a PC or game console using the included USB cable. USB connectivity will override the selected power mode.

Installation

2.4G Wireless Mode

1. Switch the mouse to 2.4G power mode.
2. Connect USB wireless dongle to the extension adapter.
3. Connect the extension adapter to a PC or game console using the included USB cable.

For optimal placement, keep the extension adapter within 20 cm of the mouse. [The red highlight of the mouse power button can be black on the QSG] [Make sure centered]

Bluetooth Mode

1. Switch the mouse to Bluetooth power mode. Mouse will flash blue on first setup
2. Go to your computer’s Bluetooth settings, search and connect to “Haste 2 Mini”.

[The red highlight of the mouse power button can be black on the QSG] [Make sure centered] [NGENUITY Logo on the far right]

Bluetooth Pairing
Hold the left click button, right click button, and DPI button simultaneously until the mouse flashes blue.
[Add black arrows like Haste 2 wireless] DPI Presets
There are 4 default DPI presets: 400 DPI (red) | 800 DPI (blue) | 1600 DPI (yellow) | 3200 DPI (green)
HyperX NGENUITY Software
To customize lighting, DPI, macro settings, and more, download HyperX NGENUITY software at hyperx.com/ngenuity
Questions or Setup Issues
Contact the HyperX support team or see user guide at hyperx.com/support
[Compliance Battery/Transmit Power Section – ask Compliance team if this needs translation]

Battery Information
Mouse contains 3.7V, 370mAh Li-Ion Polymer Battery, 1.369Wh
Cannot be replaced by user
Frequency & TX Power Information
Radio Technology: Bluetooth, 2.4GHz
Maximum Transmit Power EIRP:
Adapter: < 10mW, Mouse: < 10mW

Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Canada Notices
This Class B digital apparatus complies with Canadian ICES-003.
Avis Canadian
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Industry Canada statement
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

References

• NGENUITY – HyperX US
• Support – HyperX ROW

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>