TOPEAK TMS103BT 600BT WhiteLite 600BT USB Headlight User Manual
- June 15, 2024
- TOPEAK
Table of Contents
- TOPEAK TMS103BT 600BT WhiteLite 600BT USB Headlight
- Product Information
- Product Usage Instructions
- OVERVIEW
- BUTTON
- APPLICATIONS OF SLIDECLICK ADAPTER
- INSTALLATION
- TOE-IN ANGLE ADJUSTMENT
- SPECIFICATIONS
- BATTERY CHARGING
- MODE / RUN TIME
- WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TOPEAK TMS103BT 600BT WhiteLite 600BT USB Headlight
Product Information
Specifications
- Luminosity: 800 Lumens (Max)
- Leuchtmittel: Cree XP-L2 LED
- Battery: 3.7V 3300 mAh Lithium Ion (integrated)
- Charging: USB-C
- Charging Time: 3 hours (Approx)
- Reserve Time: 15-20 minutes
- Size: 10.5 x 3.5 x 3.1 cm
- Weight: 124 g / 4.37 oz
Product Usage Instructions
Mounting the Light
To install the light on the handlebar mount, follow these steps:
- Press the release button and slide the light forward to remove it from the mount.
- Select the desired rubber pad(s) (A, B, or A+B) for proper fit and stability.
- Attach the rubber pad(s) to the bracket using the provided Allen key.
- Place the light onto the handlebar mount and align it with the desired angle.
- Press down firmly to secure the light onto the mount.
Power On/Off and Mode Selection
To turn on the light and select different modes, follow these steps:
- To turn on the light, press the control button once.
- To switch between modes, press the control button multiple times until the desired mode is activated. The mode status is indicated by the rear light.
- To turn off the light, press and hold the control button for 3 seconds.
Battery Level Indicator
The front light has a battery level indicator that shows the current battery percentage. The indicator has four levels:
- 0~25%: Red light
- 25~50%: Orange light
- 50~75%: Green light
- 75~100%: Blue light
Charging the Light
To charge the light, follow these steps:
- Open the Type-C port cover.
- Connect the Type-C cable to the light’s charging port.
- Connect the other end of the cable to a USB power source.
- The battery indicator will show the charging progress.
- Once fully charged, disconnect the cable and close the Type-C port cover.
FAQ
Q: How long does it take to charge the light?
A: It takes approximately 3 hours to fully charge the light.
Q: How long does the reserve time last?
A: The reserve time lasts for about 15-20 minutes.
Q: What is the weight of the light?
A: The light weighs 124 g / 4.37 oz.
OVERVIEW
BUTTON
- On / Mode Selection : Press
- Off : Press and hold for 3 seconds
APPLICATIONS OF SLIDECLICK ADAPTER
Compatible with mounting adapters shown below
OPTIONAL TOPEAK MOUNTING ADAPTERS
INSTALLATION
INSTALL
Press release button and slide forward to remove the light from the handlebar mount
TOE-IN ANGLE ADJUSTMENT
SPECIFICATIONS
WARNING
- Although light body is water-resistant (under normal weather conditions of rain, etc.) never intentionally submerge it underwater
- In addition to its brightness, the beam is widely diffused. In case you need to use this light on public roads, be sure to adjust the angle downward so as not to blind oncoming traffic
- Do not touch the light unit surface during operation as the surface gets hot and may cause a burn
- Ensure the Type-C Port Cover is installed properly to avoid water damage
BATTERY CHARGING
To computer USB port or USB charger
-
The WHITELITE 800BT On/Off Button will illuminate in RED when the remaining battery power is low. Please charge the light as soon as possible
-
The WHITELITE HP 800BT LED will not illuminate if the battery is faulty
-
Disconnect the USB-C cable from your computer port when the WHITELITE 800BT is removed
-
After WHITELITE 800BT is fully charged, unplug the USB line.
-
Do not open light body
-
Li-ion battery may take 3 to 5 charging cycles to attain full capacity
-
Do not leave battery connected to charge source over 48 hours continuously
-
Charging with USB hub will take longer
-
After long periods of non-use, the battery will lose charge
Always charge the battery fully before each use and storage -
Maintain the battery by charging it every two months and storing it in a cool,dry place to prevent from decreasing its lifespan
-
Safely and properly dispose of the old Li-ion batteries according to your local regulations
-
Charging with USB hub will take longer
MODE / RUN TIME
When powering on, light reverts to last mode used
ILLUMINATION RANGE
WARRANTY
1-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items
returned without a sales receipt will assume that the warranty begins on the
date of manufacture. All warranties will be void if the product is damaged due
to user crash, abuse, system alteration, modification, or used in any way not
intended as described in this manual.
The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service, Call:
1-800-250-3068
For International customer service,Visit
www.topeak.com to find your local contact
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement, The
device can be used in portable exposure condition without restriction.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B) / NMB-003(B)
MODEL NO. : TMS-103BT
PRODUCT NAME: WHITELITE 600 BT
RATING: 5V
TRADEMARK: TOPEAK
MANUFACTURER: TOPEAK, Inc.
COUNTRY OF ORIGIN: TAIWAN
FCC ID: R3STMS-103BT
IC: 28307-TMS103BT
KCC ID: R-R-tpk-TMS-103BT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>